sunerok
|
|
February 05, 2016, 05:52:41 PM Last edit: February 05, 2016, 08:32:16 PM by sunerok |
|
so i've been toying with a fork of the most current bitcoin source code, and im trying to cpumine the new genesis block and 1st block after.. ./minerd -a sha256d -o http://127.0.0.1:8228 -t 1 -u rpcuser -p rpcpassword -D -P [2016-02-05 12:33:00] 1 miner threads started, using 'sha256d' algorithm. [2016-02-05 12:33:00] ...retry after 10 seconds [2016-02-05 12:33:10] ...retry after 10 seconds [2016-02-05 12:33:20] ...retry after 10 seconds
odd thing is, i can telnet to that port and see its open, but the miner doesn't seem to care what my rpc user/pass info is, because ive even entered the wrong info and it just does the same thing.. i get no info from -D debug either.. *update so i used a binary from the sourceforge site: ./minerd -a sha256d -o http://localhost:8288 -t 1 -u rpcuser -p rpcpassword -D -P [2016-02-05 15:27:18] 1 miner threads started, using 'sha256d' algorithm. [2016-02-05 15:27:18] JSON protocol request: {"method": "getblocktemplate", "params": [{"capabilities": ["coinbasetxn", "coinbasevalue", "longpoll", "workid"]}], "id":0}
* Rebuilt URL to: http://localhost:8228/ * Hostname was NOT found in DNS cache * Trying 127.0.0.1... * TCP_NODELAY set * Adding handle: conn: 0x7f0e10012b10 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7f0e10012b10) send_pipe: 1, recv_pipe: 0 * Connected to localhost (127.0.0.1) port 8228 (#0) * Server auth using Basic with user 'rpcuser' > POST / HTTP/1.1 Authorization: Basic cnBjdXNlcjpycGNwYXNzd29yZA== Host: localhost:8228 Accept-Encoding: deflate, gzip Content-Type: application/json Content-Length: 126 User-Agent: cpuminer/2.4.3 X-Mining-Extensions: midstate
* The requested URL returned error: 500 Internal Server Error * Closing connection 0 [2016-02-05 15:27:18] HTTP request failed: The requested URL returned error: 500 Internal Server Error [2016-02-05 15:27:18] json_rpc_call failed, retry after 30 seconds still isnt working properly.. no info in the daemon's debug.log either..
|
|
|
|
|
johnjacksonbtc
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 10, 2016, 03:50:12 PM |
|
Aren't there memory leaks in cpuminer 2.4.3 win64 version? Its virtual memory increases roughly 4GB per day while mining 1MB blocks. When remote node restarts these GB disappear and miner then tries to resolve host with four random characters even it was configured to connect at 127.0.0.1.
|
|
|
|
pooler (OP)
|
|
March 15, 2016, 07:11:58 PM |
|
Aren't there memory leaks in cpuminer 2.4.3 win64 version? Its virtual memory increases roughly 4GB per day while mining 1MB blocks. When remote node restarts these GB disappear and miner then tries to resolve host with four random characters even it was configured to connect at 127.0.0.1.
You are right, I just checked and there is indeed a memory leak in the GBT code. I'll push a quick fix to GitHub shortly. Hopefully I'll also be able to publish new binaries soon.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
Borgminer
|
|
March 21, 2016, 07:40:22 AM |
|
garbage it doesnt even open up so you can configure it .
|
|
|
|
pooler (OP)
|
|
March 21, 2016, 09:59:14 AM |
|
I ran into this a few days ago, it's quite relevant: https://www.reddit.com/r/ProgrammerHumor/comments/479o3r/open_source_documentation/While I agree that the proposed "fix" is rather harsh, one could argue that if you don't know what a CLI is then you almost certainly don't want to run cpuminer, as nowadays its practical uses are limited to stress testing and to the debugging of other mining-related software.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
pooler (OP)
|
|
March 24, 2016, 05:19:41 PM |
|
Version 2.4.4This is a bugfix release to address a nasty memory leak affecting getblocktemplate mode since version 2.4. The source code is, as always, available at GitHub. Source tarball and binaries are available at Sourceforge.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
utahjohn
|
|
March 27, 2016, 02:43:24 AM Last edit: March 27, 2016, 03:49:26 AM by utahjohn |
|
@pooler I contacted u a few days ago by email about scrypt_core() for aarch64, I don't know how to code a .S file but I came up with a temporary solution: A fallback written in C++ for unsupported architectures. simply place the fallback before the others in build order and it would compile, and be replace by optimized version if the architecture is supported This file is critical to my build of Diamond wallet. Your scrypt-arm.S file will not build on aarch64. This is ONLY thing stopping build https://bitcointalk.org/index.php?topic=580725.msg14296622#msg14296622Like I said if I had C++ source I could get it to run (likely slower). DMD Diamond coin: https://bitcointalk.org/index.php?topic=580725
|
|
|
|
pooler (OP)
|
|
March 27, 2016, 07:22:18 AM |
|
@pooler I contacted u a few days ago by email about scrypt_core() for aarch64, I don't know how to code a .S file but I came up with a temporary solution: A fallback written in C++ for unsupported architectures. simply place the fallback before the others in build order and it would compile, and be replace by optimized version if the architecture is supported As I've told you in my email, I still haven't been able to test cpuminer on aarch64, but time allowing I plan to look into this soon. If you're OK with an unoptimized build, I think as a temporary solution configuring with --disable-assembly should be enough.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
russy121
Newbie
Offline
Activity: 24
Merit: 0
|
|
April 07, 2016, 08:36:52 PM |
|
hi all has anyone been able to compile on a raspberry pi 2 or 3 for hodl if so can you tell me how
ty ps it runs so nice on ubuntu
|
|
|
|
Pmalek
Legendary
Offline
Activity: 2912
Merit: 7507
Playgram - The Telegram Casino
|
|
April 16, 2016, 05:23:01 PM |
|
Why is this reported as a threat? I cant even download it, chrome and firefox are going red!
|
|
|
|
▄▄███████▄▄███████ ▄███████████████▄▄▄▄▄ ▄████████████████████▀░ ▄█████████████████████▄░ ▄█████████▀▀████████████▄ ██████████████▀▀█████████ █████████████████████████ ██████████████▄▄█████████ ▀█████████▄▄████████████▀ ▀█████████████████████▀░ ▀████████████████████▄░ ▀███████████████▀▀▀▀▀ ▀▀███████▀▀███████ | ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ Playgram.io ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄░░ ▀▄ █ █ █ █ █ █ █ ▄▀ ▀▀▀░░
| │ | ▄▄▄███████▄▄▄ ▄▄███████████████▄▄ ▄███████████████████▄ ▄██████████████▀▀█████▄ ▄██████████▀▀███▄██▐████▄ ██████▀▀████▄▄▀▀█████████ ████▄▄███▄██▀█████▐██████ ██████████▀██████████████ ▀███████▌▐██▄████▐██████▀ ▀███████▄▄███▄████████▀ ▀███████████████████▀ ▀▀███████████████▀▀ ▀▀▀███████▀▀▀ | | │ | ██████▄▄███████▄▄████████ ███▄███████████████▄░░▀█▀ ███████████░█████████░░█ ░█████▀██▄▄░▄▄██▀█████░█ █████▄░▄███▄███▄░▄██████ ████████████████████████ ████████████████████████ ██░▄▄▄░██░▄▄▄░██░▄▄▄░███ ██░░░█░██░░░█░██░░░█░████ ██░░█░░██░░█░░██░░█░░████ ██▄▄▄▄▄██▄▄▄▄▄██▄▄▄▄▄████ ███████████████████████ ███████████████████████ | | │ | ► | |
|
|
|
johnjacksonbtc
Newbie
Offline
Activity: 20
Merit: 0
|
|
April 21, 2016, 09:34:22 AM |
|
Version 2.4.4This is a bugfix release to address a nasty memory leak affecting getblocktemplate mode since version 2.4. The source code is, as always, available at GitHub. Source tarball and binaries are available at Sourceforge. Thanks for a release, but memleak still is present - 2MB per getblocktemplate request. I also see lowered I/O and page priority values, that looks better. Why is this reported as a threat? I cant even download it, chrome and firefox are going red!
I also saw that red warning, you should be able to ignore this warning and download this software. It is marked red because it is easiest way for antivirus (or virus that detects other viruses) to identify that your system is compromised. Usually antivirus detects miner executable but main virus remains in system.
|
|
|
|
pooler (OP)
|
|
April 21, 2016, 10:03:14 PM |
|
memleak still is present - 2MB per getblocktemplate request.
I must have missed this one because it only happens when long polling is enabled. Anyway, I've just pushed a fix to the git repo. Thank you again!
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
TradeForProfits
Newbie
Offline
Activity: 35
Merit: 0
|
|
May 19, 2016, 05:23:51 AM |
|
appreciate your work. Is there a way for a noob to compile scrypt-jane support into your latest optimized cpuminer? Thanks.
|
|
|
|
pooler (OP)
|
|
May 19, 2016, 06:26:05 AM |
|
appreciate your work. Is there a way for a noob to compile scrypt-jane support into your latest optimized cpuminer? Thanks.
Sorry, I don't think so.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
joblo
Legendary
Offline
Activity: 1470
Merit: 1114
|
|
May 19, 2016, 01:35:22 PM |
|
appreciate your work. Is there a way for a noob to compile scrypt-jane support into your latest optimized cpuminer? Thanks.
cpuminer-opt (see sig) supports scrypt-jane and many other algos.
|
|
|
|
realgera
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 27, 2016, 07:55:15 AM |
|
Hello! I'm trying to build 64 bit binary on AIX 7.1, but configure fails with an error. Any suggestions? config.log: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by cpuminer configure 2.4.4, which was generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure CFLAGS=-O3
## --------- ## ## Platform. ## ## --------- ##
hostname = srvcrp6 uname -m = 00CC01114C00 uname -r = 1 uname -s = AIX uname -v = 7
/usr/bin/uname -p = powerpc /bin/uname -X = unknown
/bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = 7.1.0.0 /bin/universe = unknown
PATH: /usr/bin PATH: /etc PATH: /usr/sbin PATH: /usr/ucb PATH: /usr/bin/X11 PATH: /sbin PATH: /usr/java/jre/bin PATH: /usr/java/bin
## ----------- ## ## Core tests. ## ## ----------- ##
configure:2336: checking build system type configure:2350: result: powerpc-ibm-aix7.1.0.0 configure:2370: checking host system type configure:2383: result: powerpc-ibm-aix7.1.0.0 configure:2403: checking target system type configure:2416: result: powerpc-ibm-aix7.1.0.0 configure:2460: checking for a BSD-compatible install configure:2528: result: ./install-sh -c configure:2539: checking whether build environment is sane configure:2594: result: yes configure:2745: checking for a thread-safe mkdir -p configure:2784: result: ./install-sh -c -d configure:2791: checking for gawk configure:2807: found /usr/bin/gawk configure:2818: result: gawk configure:2829: checking whether make sets $(MAKE) configure:2851: result: yes configure:2880: checking whether make supports nested variables configure:2897: result: yes configure:3026: checking whether to enable maintainer-specific portions of Makefiles configure:3035: result: no configure:3061: checking for style of include used by make configure:3089: result: GNU configure:3160: checking for gcc configure:3176: found /usr/bin/gcc configure:3187: result: gcc configure:3416: checking for C compiler version configure:3425: gcc --version >&5 gcc (GCC) 4.8.3 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3436: $? = 0 configure:3425: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/opt/freeware/libexec/gcc/powerpc-ibm-aix7.1.0.0/4.8.3/lto-wrapper Target: powerpc-ibm-aix7.1.0.0 Configured with: ../gcc-4.8.3/configure --with-as=/usr/bin/as --with-ld=/usr/bin/ld --enable-languages=c,c++,fortran --prefix=/opt/freeware --mandir=/opt/freeware/man --infodir=/opt/freeware/info --enable-version-specific-runtime-libs --disable-nls --enable-decimal-floa t=dpd --host=powerpc-ibm-aix7.1.0.0 Thread model: aix gcc version 4.8.3 (GCC) configure:3436: $? = 0 configure:3425: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:3436: $? = 1 configure:3425: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion' gcc: fatal error: no input files compilation terminated. configure:3436: $? = 1 configure:3456: checking whether the C compiler works configure:3478: gcc -O3 conftest.c >&5 Assembler: /tmp//cci5yi3I.s: line 12: Only .llong should be used for relocatable expressions. configure:3482: $? = 1 configure:3520: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "cpuminer" | #define PACKAGE_TARNAME "cpuminer" | #define PACKAGE_VERSION "2.4.4" | #define PACKAGE_STRING "cpuminer 2.4.4" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "cpuminer" | #define VERSION "2.4.4" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:3525: error: in `/usr/cpuminer/cpuminer-2.4.4': configure:3527: error: C compiler cannot create executables See `config.log' for more details
## ---------------- ## ## Cache variables. ## ## ---------------- ##
ac_cv_build=powerpc-ibm-aix7.1.0.0 ac_cv_env_CCASFLAGS_set='' ac_cv_env_CCASFLAGS_value='' ac_cv_env_CCAS_set='' ac_cv_env_CCAS_value='' ac_cv_env_CC_set='' ac_cv_env_CC_value='' ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value=-O3 ac_cv_env_CPPFLAGS_set='' ac_cv_env_CPPFLAGS_value='' ac_cv_env_CPP_set='' ac_cv_env_CPP_value='' ac_cv_env_LDFLAGS_set='' ac_cv_env_LDFLAGS_value='' ac_cv_env_LIBS_set='' ac_cv_env_LIBS_value='' ac_cv_env_build_alias_set='' ac_cv_env_build_alias_value='' ac_cv_env_host_alias_set='' ac_cv_env_host_alias_value='' ac_cv_env_target_alias_set='' ac_cv_env_target_alias_value='' ac_cv_host=powerpc-ibm-aix7.1.0.0 ac_cv_prog_AWK=gawk ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_make_make_set=yes ac_cv_target=powerpc-ibm-aix7.1.0.0 am_cv_make_support_nested_variables=yes
## ----------------- ## ## Output variables. ## ## ----------------- ##
ACLOCAL='${SHELL} /usr/cpuminer/cpuminer-2.4.4/missing aclocal-1.14' ALLOCA='' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='1' AM_V='$(V)' ARCH_ARM_FALSE='' ARCH_ARM_TRUE='' ARCH_PPC_FALSE='' ARCH_PPC_TRUE='' ARCH_x86_64_FALSE='' ARCH_x86_64_TRUE='' ARCH_x86_FALSE='' ARCH_x86_TRUE='' AUTOCONF='${SHELL} /usr/cpuminer/cpuminer-2.4.4/missing autoconf' AUTOHEADER='${SHELL} /usr/cpuminer/cpuminer-2.4.4/missing autoheader' AUTOMAKE='${SHELL} /usr/cpuminer/cpuminer-2.4.4/missing automake-1.14' AWK='gawk' CC='gcc' CCAS='' CCASDEPMODE='' CCASFLAGS='' CCDEPMODE='' CFLAGS='-O3' CPP='' CPPFLAGS='' CYGPATH_W='echo' DEFS='' DEPDIR='.deps' ECHO_C='\c' ECHO_N='' ECHO_T='' EGREP='' EXEEXT='' GREP='' HAVE_WINDOWS_FALSE='' HAVE_WINDOWS_TRUE='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' JANSSON_LIBS='' LDFLAGS='' LIBCURL='' LIBCURL_CPPFLAGS='' LIBOBJS='' LIBS='' LTLIBOBJS='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='${SHELL} /usr/cpuminer/cpuminer-2.4.4/missing makeinfo' MKDIR_P='./install-sh -c -d' OBJEXT='' PACKAGE='cpuminer' PACKAGE_BUGREPORT='' PACKAGE_NAME='cpuminer' PACKAGE_STRING='cpuminer 2.4.4' PACKAGE_TARNAME='cpuminer' PACKAGE_URL='' PACKAGE_VERSION='2.4.4' PATH_SEPARATOR=':' PTHREAD_FLAGS='' PTHREAD_LIBS='' RANLIB='' SET_MAKE='' SHELL='/bin/sh' STRIP='' USE_ASM_FALSE='' USE_ASM_TRUE='' VERSION='2.4.4' WANT_JANSSON_FALSE='' WANT_JANSSON_TRUE='' WS2_LIBS='' _libcurl_config='' ac_ct_CC='gcc' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCCAS_FALSE='' am__fastdepCCAS_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='_no' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' bindir='${exec_prefix}/bin' build='powerpc-ibm-aix7.1.0.0' build_alias='' build_cpu='powerpc' build_os='aix7.1.0.0' build_vendor='ibm' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='powerpc-ibm-aix7.1.0.0' host_alias='' host_cpu='powerpc' host_os='aix7.1.0.0' host_vendor='ibm' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /usr/cpuminer/cpuminer-2.4.4/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='NONE' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target='powerpc-ibm-aix7.1.0.0' target_alias='' target_cpu='powerpc' target_os='aix7.1.0.0' target_vendor='ibm'
## ----------- ## ## confdefs.h. ## ## ----------- ##
/* confdefs.h */ #define PACKAGE_NAME "cpuminer" #define PACKAGE_TARNAME "cpuminer" #define PACKAGE_VERSION "2.4.4" #define PACKAGE_STRING "cpuminer 2.4.4" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define PACKAGE "cpuminer" #define VERSION "2.4.4"
configure: exit 77
|
|
|
|
pooler (OP)
|
|
May 27, 2016, 08:23:42 AM |
|
Hello! I'm trying to build 64 bit binary on AIX 7.1, but configure fails with an error. Any suggestions? config.log: configure:3456: checking whether the C compiler works configure:3478: gcc -O3 conftest.c >&5 Assembler: /tmp//cci5yi3I.s: line 12: Only .llong should be used for relocatable expressions. configure:3482: $? = 1 configure:3520: result: no
This seems relevant: http://www.hpc.cineca.it/content/i-cannot-use-gcc-compiler-even-very-simple-programs
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
realgera
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 27, 2016, 09:17:43 AM |
|
Hello! I'm trying to build 64 bit binary on AIX 7.1, but configure fails with an error. Any suggestions? config.log: configure:3456: checking whether the C compiler works configure:3478: gcc -O3 conftest.c >&5 Assembler: /tmp//cci5yi3I.s: line 12: Only .llong should be used for relocatable expressions. configure:3482: $? = 1 configure:3520: result: no
This seems relevant: http://www.hpc.cineca.it/content/i-cannot-use-gcc-compiler-even-very-simple-programsDon't think so, I'm using OBJECT_MODE=64. It seems there is an incorrect gcc option in config script: configure:3425: gcc -V >&5 gcc: error: unrecognized command line option '-V'
|
|
|
|
pooler (OP)
|
|
May 27, 2016, 09:38:22 AM |
|
Hello! I'm trying to build 64 bit binary on AIX 7.1, but configure fails with an error. Any suggestions? config.log: configure:3456: checking whether the C compiler works configure:3478: gcc -O3 conftest.c >&5 Assembler: /tmp//cci5yi3I.s: line 12: Only .llong should be used for relocatable expressions. configure:3482: $? = 1 configure:3520: result: no
This seems relevant: http://www.hpc.cineca.it/content/i-cannot-use-gcc-compiler-even-very-simple-programsDon't think so, I'm using OBJECT_MODE=64. So you've tried adding -maix64 to CFLAGS? It seems there is an incorrect gcc option in config script: configure:3425: gcc -V >&5 gcc: error: unrecognized command line option '-V'
I believe that is normal.
|
BTC: 15MRTcUweNVJbhTyH5rq9aeSdyigFrskqE · LTC: LTCPooLqTK1SANSNeTR63GbGwabTKEkuS7
|
|
|
|