loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 16, 2013, 06:21:55 PM |
|
For what ever reason I've also the idea that on ozco.in i'm mining 'slower' than on BTCGuild / Slush. However, I'm not sure if there is a way to 'prove' that.
Calc your hash rate based on diff1 shsares to be 100% sure what your speed is. Folow my posts and kano replies in Lancelot thread around page 21
|
|
|
|
server
Legendary
Offline
Activity: 892
Merit: 1002
1 BTC =1 BTC
|
|
April 16, 2013, 07:56:28 PM |
|
Can anyone tell me, if these are normal values for the avalon. HW error seems still pretty high. Updated to 20130410 (next-testing) firmware recently. Cgminer runs at 282M(Advance): [Elapsed] => 41011 [MHS av] => 67092.46 [Found Blocks] => 0 [Getworks] => 1495 [Accepted] => 9909 [Rejected] => 52 [Hardware Errors] => 827 [Utility] => 14.50 [Discarded] => 2785 [Stale] => 0 [Get Failures] => 0 Can there be anything else done? Am I loosing lots of coins due to that high error-rate? To compare my stats: [0] => SUMMARY [Elapsed] => 4149 [MHS av] => 70985.47 [Found Blocks] => 0 [Getworks] => 142 [Accepted] => 1949 [Rejected] => 1 [Hardware Errors] => 55 [Utility] => 28.19 [Discarded] => 267 [Stale] => 0 [Get Failures] => 0 [Local Work] => 75766 [Remote Failures] => 0 [Network Blocks] => 6 [Total MH] => 294514497.3527 [Work Utility] => 991.73
I'm running at Freq 300 and Temp1 = 24, Temp3 = 41. What's your temp1 & 3 ?
|
|
|
|
Sakdrissi
Newbie
Offline
Activity: 17
Merit: 0
|
|
April 16, 2013, 08:36:50 PM |
|
Thanks for your help guys. Opened it and checked the cables. Everything seems to be connected. Although I wanted it to run for some hours, cgminer restarted half an hour before. But anyway, same picture:
[Elapsed] => 2105 [MHS av] => 64931.87 [Found Blocks] => 0 [Getworks] => 84 [Accepted] => 499 [Rejected] => 1 [Hardware Errors] => 26 [Utility] => 14.22
Temp1: 26 Temp3: 47
Ambient temperature is about 23°C.
|
|
|
|
server
Legendary
Offline
Activity: 892
Merit: 1002
1 BTC =1 BTC
|
|
April 16, 2013, 09:03:24 PM Last edit: April 17, 2013, 10:51:46 AM by server |
|
Temp1: 26 Temp3: 47
Ambient temperature is about 23°C.
I don't know if 47 degrees temp3 is too high. Lower is always better in my opinion. Mine was 44 and I lowered it 3 degrees by making the PSU external. (HQ ENERMAX GOLD PSU BTW!! LOVE IT) Also I use an external ventilator to cool down the aluminium bottom plate since this is connected to the cooling sinks inside. Temp3 is now steady at 41.
|
|
|
|
Mikej0h
Member
Offline
Activity: 117
Merit: 100
Life is short, play long
|
|
April 16, 2013, 09:56:15 PM |
|
For me: [Elapsed] => 1648 [MHS av] => 70381.65 [Found Blocks] => 0 [Getworks] => 282 [Accepted] => 446 [Rejected] => 1 [Hardware Errors] => 17 [Utility] => 16.24 [Discarded] => 199 [Stale] => 0 [Get Failures] => 0 [Local Work] => 30096 [Remote Failures] => 0 [Network Blocks] => 6 [Total MH] => 116002771.6707 [Work Utility] => 983.66 [Difficulty Accepted] => 26654.00000000 [Difficulty Rejected] => 64.00000000 [Difficulty Stale] => 0.00000000 [Best Share] => 10425
T1: 26, T2: -1, T3: 45 Also running @ 300mhz in Balance Mode @ ozco.in.
|
|
|
|
zero-asic
Member
Offline
Activity: 79
Merit: 10
|
|
April 17, 2013, 12:55:08 AM |
|
[Elapsed] => 289927 [MHS av] => 66558.83 [Found Blocks] => 0 [Getworks] => 12656 [Accepted] => 98268 [Rejected] => 388 [Hardware Errors] => 3129 [Utility] => 20.34 [Discarded] => 24241 [Stale] => 0 [Get Failures] => 0 [Local Work] => 4720592 [Remote Failures] => 0 [Network Blocks] => 560 [Total MH] => 19297167797.3573 [Work Utility] => 929.86 [Difficulty Accepted] => 4447635.00000000 [Difficulty Rejected] => 18411.00000000 [Difficulty Stale] => 0.00000000 [Best Share] => 16788986
Temp 1 - 35 Temp 2 - 46 282M Running on Ozcoin for 3d 8h 34m 34s with failover to BTCGuild
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
|
April 17, 2013, 04:42:47 AM |
|
[Elapsed] => 32527 [MHS av] => 71271.75 [Found Blocks] => 0 [Getworks] => 1204 [Accepted] => 16934 [Rejected] => 52 [Hardware Errors] => 554 [Utility] => 31.24 [Discarded] => 2227 [Stale] => 0 [Get Failures] => 0 [Local Work] => 596178 [Remote Failures] => 0 [Network Blocks] => 69 [Total MH] => 2318234367.2799 [Work Utility] => 995.65 [Difficulty Accepted] => 541888.00000000 [Difficulty Rejected] => 1664.00000000 [Difficulty Stale] => 0.00000000 [Best Share] => 774866
Temp 22 and 44 Running at 300 Stats are based on a 9 hr running session.
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
April 17, 2013, 04:59:24 AM |
|
Temp 22 and 44 Running at 300 Stats are based on a 9 hr running session. Yep that's what that elapsed figure means: 32527 / 3600 = 9.035hrs
|
|
|
|
-ck
Legendary
Offline
Activity: 4270
Merit: 1645
Ruu \o/
|
|
April 17, 2013, 05:03:26 AM |
|
Utility depends entirely on what difficulty your pool is asking you to mine at. It is no indicator of how well your device is working.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1379
Merit: 1003
nec sine labore
|
|
April 19, 2013, 08:29:48 PM |
|
thanks xempew, I had forgot the wiki. Big changes, it seems. Has anyone here already tested it? spiccioli
|
|
|
|
zero-asic
Member
Offline
Activity: 79
Merit: 10
|
|
April 19, 2013, 09:33:38 PM |
|
thanks xempew, I had forgot the wiki. Big changes, it seems. Has anyone here already tested it? spiccioli I have it up and running on two machines. So far it seems good.
|
|
|
|
|
Matthew N. Wright
Untrustworthy
Hero Member
Offline
Activity: 588
Merit: 500
Hero VIP ultra official trusted super staff puppet
|
|
April 20, 2013, 02:33:55 PM |
|
Will this firmware be included already in Batch 3?
|
|
|
|
Mikej0h
Member
Offline
Activity: 117
Merit: 100
Life is short, play long
|
|
April 20, 2013, 02:55:43 PM |
|
Firmware development goes pretty fast. I would guess the development continues, and there is a different version when batch 3 is send out. Anyways; upgrading the Avalon takes literally less then a minute. Steps to upgrade: - Login to the web-ui - Click on "System" - Click on "Backup / Flash Firmware" - Click on "Browse..." (see screenshot: http://postimg.org/image/yeqww5n3h/) - Click on "Flash image" ... And a few seconds later you get the login screen back, and your firmware has been upgraded.
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1379
Merit: 1003
nec sine labore
|
|
April 20, 2013, 03:05:38 PM |
|
Hi
A new firmware released(Version: 20130419), please update your Avalon to latest firmware
Hi xiangfu, I've just updated my units, but I still cannot mine on p2pool without using --fix-protocol which has to be added by hand to /etc/init.d/cgminer Is this the way it is supposed to be? Shouldn't p2pool mining be working with stratum when using latest cgminer? spiccioli
|
|
|
|
irritant
Sr. Member
Offline
Activity: 473
Merit: 250
Sodium hypochlorite, acetone, ethanol
|
|
April 20, 2013, 11:12:40 PM |
|
Hi
A new firmware released(Version: 20130419), please update your Avalon to latest firmware
Hi xiangfu, I've just updated my units, but I still cannot mine on p2pool without using --fix-protocol which has to be added by hand to /etc/init.d/cgminer Is this the way it is supposed to be? Shouldn't p2pool mining be working with stratum when using latest cgminer? spiccioli NOTE: The best performance the small handful of users who got this working have reported is still about 25-30% DOA against P2Pool (versus the usual DOA of 8-15% or so.) So it's close to desired, but be aware that getting things working in this state currently requires command-line skills and the ability to check-out branches from p2pool's git repository. For the moment, your most efficient options are solo-mining with local pool software, or just using one of the online pools.
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
April 21, 2013, 12:58:56 PM |
|
xiangfu, Working like charm with latest FW:
Elapsed:4h 13m 31s Difficulty Accepted:259,204.00 1022.43/m 73188.66
2ghs+ improvement. I can be sure after 24 hours though, because of the diff variation but it works better compared to old FW for sure!
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1379
Merit: 1003
nec sine labore
|
|
April 21, 2013, 08:54:33 PM |
|
What firmware is it running? Old ones did not start hashing if a ntpd server could not be contacted. This is the first thing that comes to my mind. spiccioli
|
|
|
|
|