Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jstefanop]

After AMD resolves the driver issue, how many Mhs at 5700/5700 XT are expected?

Claymore might be able to say, but otherwise we're just guessing.  I'm going with 54Mh/s for a 5700XT.

With overclocks and timing adjustments near 60 MH should be easily achievable.

[laik2]

After AMD resolves the driver issue, how many Mhs at 5700/5700 XT are expected?

Claymore might be able to say, but otherwise we're just guessing.  I'm going with 54Mh/s for a 5700XT.

With overclocks and timing adjustments near 60 MH should be easily achievable.

Strong prediction
I would say ~50 should be doable.

[dejvid98]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

[chappolino]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

Maybe you haven't deleted someone else's wallet in the start.bat file

[scryptr]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

Maybe you haven't deleted someone else's wallet in the start.bat file

NANOPOOL HAS ALWAYS HAD A LONG WAIT FOR THE HASH REPORT--

It may take 30 minutes to an hour or more for the first report of your miner's hash rate.  I respect NanoPool, they have always paid out my earnings, but the initial wait for a hash rate report is a nuisance.  Be sure your wallet address is correct.       --scryptr

[adaseb]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.

The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.

Most likely this is your issue.

[Claymore]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.

The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.

Most likely this is your issue.

Incorrect, default epools.txt does not contain any pools, all lines are disabled with "#".

[RuMiner]

there are many websites saying it's official, in fact they have epools.txt with lines filled. this one, for example: claymore-dual.github.io

[dejvid98]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.

The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.

Most likely this is your issue.

Well,all comments considered,the thing I should do is paste into epool.txt : C:\Users\admin\\Downloads\Claymore12\Claymore12\EthDcrMiner64.exe  -epool eu1-ethermine.org:4444
-ewall : address
-epsw x - strap1

Before that I added -driver install and then reboot pc and then deleted from script and then it looks like above.
Now I run the script and mining start but at the begining there is message driver is not installed and with the red letters written message try start the miner with command -driver uninstall and there is 0 mhs at nanopool as I stated before
If someone have further instructions what could be issue I would be greatful

[WhackOBill]

Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing  0 mhs, anyone with same issue?

When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.

The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.

Most likely this is your issue.

Well,all comments considered,the thing I should do is paste into epool.txt : C:\Users\admin\\Downloads\Claymore12\Claymore12\EthDcrMiner64.exe  -epool eu1-ethermine.org:4444
-ewall : address
-epsw x - strap1

Before that I added -driver install and then reboot pc and then deleted from script and then it looks like above.
Now I run the script and mining start but at the begining there is message driver is not installed and with the red letters written message try start the miner with command -driver uninstall and there is 0 mhs at nanopool as I stated before
If someone have further instructions what could be issue I would be greatful

open a command window in Administrator mode, change to the miner's directory, then execute "EthDcrMiner64 -driver install" from the command prompt.  Or "uninstall" if you're removing.  Once the driver is installed, you don't have to run in Administrator mode going forward.

[dejvid98]

Thanks I wil try it .

I got one more question,
Does anyone use gtx1660?
How much mhs you can get?
I cannot get more than 21.8 and settings are

memory clock : 955 MhZ
core clock : -502
power limit : 70

Even if I increase power limit it does not change.

[RuMiner]

Does anyone use gtx1660?
How much mhs you can get?

26.5
-mclock +670 -powlim -35 -strap 1 (notice: powlim is negative)

[dejvid98]

Did you set that in BIOS?
Because Msi  afterburner did not offer setting power limit below 50
 

[RuMiner]

dejvid98, no, I hate MSI AB it's Claymore's config
remember that Claymore will not affect this setting if AB is installed (even if not run)

[dejvid98]

Well,then I should write config above in start.bat script?
I have configured 4 p106 mining gpu with MS aftr and I believe I pulled out max of then,but for gtx1660 apparently not

[Geluss]

HI, Is there a possibility to add CPU coin CPUchain to Claymore dualmining with ETH?

https://bitcointalk.org/index.php?topic=5161183.0

BR
G.

[big_daddy]

HI, Is there a possibility to add CPU coin CPUchain to Claymore dualmining with ETH?

https://bitcointalk.org/index.php?topic=5161183.0

BR
G.

if its a cpu-minable coin only, how do you expect to be mined with Claymore's gpu miner?
Just run your cpu miner alongside your Clay miner and mine it with your cpu

[burntroach85]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

[lexele]

hi,
could you give more details,
with  5700 or XT?
settings?
power use?
tx

[Binary100100]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

Which card? 5700 or XT?
What are your OC settings?
How many watts is it using?