Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[bitcoin.dbi]

Any chances to use at the same time 2 miners? (for nvidia and amd)
Whenever use second window got next message:

driver is not installed! trying to install it...
Oпepaция ycпeшнo зaвepшeнa.
driver is in use, try to start miner with -driver uninstall parameter.

So second window works only without strap command ;(

[evlo]

12 1060 micron (no strap) @ 635mV (little bit more efficient then pl 70)

How are you able to set low voltage like that?
In my afterburner in curve editor voltage starts from 800mv, so there is probably a different way

I am guessing its a typo and maybe he meant 935mV. I've tried different voltages and I think its impossible to be able to run it that low and even get Windows to load.

He might get lucky and have an extremely high ASIC quality however its not possible that 635mV would be enough to mine with.

With the RX 470/570, they generally need about 120 Watts (from the wall, not including cpu+ram+mobo) to run without hardware error or hangs. If you want it to use less power you need to mine an algo like XMR which uses like  100 Watts.

not a typo and i have replied to him, obviously amds are crap with about 1/2 efficiency per watt

in nvidia inspector you can go as low as you wish, 650mV is not as low as it will go


However after the straps I have problem on two rigs, one card is crashing on each, I have even tried settings like this
-strap 1,1,6,1,1,1,1,1,1,1,1,1 -sintensity 100,100,2,100,100,100,100,100,100,100,100,100
-strap 1,1,0,1,1,1,1,1,1,1,1,1 -sintensity 100,100,0,100,100,100,100,100,100,100,100,100
and 0 mem OC, and even disable undervolting
then cards now gets about 20MHS and still crashes, while before with ethminer or phoenix both cards could get 23 or 22mhs undervolted overclocked

Well no rig is truly stable now, but that is expected while finding new OC values, best I got was 22h58m uptime while before the straps months

Maybe just first dead GPU, but so far these things were unkillable.

[Adrian_D2705]

Will there be a Linux release soon?

[dragonmike]

Hey Mister Claymore, good job on picking up the slack on the miner now that profitability is going up again

Two suggestions:

1) clean up the OP (and the miner): there's a lot of irrelevant legacy stuff there now. Nobody dual-mines DCR or SIA with GPUs anymore. When you have time, I think it would be good to get rid of some of the clag.

2) (unless I missed it) you should enable VBK and/or other more relevant dual-mining coins/algos.

Thx

[wgestickley]

Hey Mister Claymore, good job on picking up the slack on the miner now that profitability is going up again

Two suggestions:

1) clean up the OP (and the miner): there's a lot of irrelevant legacy stuff there now. Nobody dual-mines DCR or SIA with GPUs anymore. When you have time, I think it would be good to get rid of some of the clag.

2) (unless I missed it) you should enable VBK and/or other more relevant dual-mining coins/algos.

Thx

Dual Mining of VBK would be awesome! I saw in other Forums user, who say it is currently also possible to run the Claymore Miner and another separat Veriblock Miner to Dual Mine this way but I never check/confirm it by myself. Any experience here?

[camchimonline]

14.5b good for polaris samsung vram, epila crash

[AnViGo]

Claymore, remove please the space in the "Remote manager" folder name, it sometimes causes an error when opening over the network, thks.

[fractalyse]

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Latest version is v14.5 Beta - Supercharged Edition:

- added "-rxboost" option for AMD Polaris cards, use "-rxboost 1" to improve hashrate by about 5% by applying some additional memory timings. You can use your own straps or use "-strap" option, you will get boost anyway.
   See Readme for additional information.
- fixed issue with overclock reset for Nvidia cards.



DOWNLOAD LINK (Windows and Linux):
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w

Windows ONLY.. no linux version since v12... latest linux release is 6 month old..
Could you please upload the linux version ?

[evlo]

Is there now any way to watch mem errors on nvidia? Because straps brought all the pain from amd tuning, but at least amd reports mem errors which helps a lot to make rigs stable. Now I get to wait 20+ hours just to see one gpu in rig fail and try again.

[ngbaoson]

What is best driver for Nvidia?

[encycrypto]

Windows 7 x64 + AMD Radeon Driver v19.x + 5xRX470 is it real?

It should work fine. I've been mining on Windows for a long time.

[Marvell2]

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Latest version is v14.5 Beta - Supercharged Edition:

- added "-rxboost" option for AMD Polaris cards, use "-rxboost 1" to improve hashrate by about 5% by applying some additional memory timings. You can use your own straps or use "-strap" option, you will get boost anyway.
   See Readme for additional information.
- fixed issue with overclock reset for Nvidia cards.



DOWNLOAD LINK (Windows and Linux):
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w

Windows ONLY.. no linux version since v12... latest linux release is 6 month old..
Could you please upload the linux version ?

Fux liniux, windoez rulz

[UnclWish]

I still doesn't understand why the same AMD RX 580 hynix MJR memory straps flashed to the vbios is more stable than applying them via -strap option...

[laik2]

I still doesn't understand why the same AMD RX 580 hynix MJR memory straps flashed to the vbios is more stable than applying them via -strap option...

Because messing with ATOM command tables is not an easy task

[Mroziek]

nvidiainspector, but I think there is issue wit p2 states after claymore driver hack, I think undervolting no longer applies maybe, maybe p2 disable deactivation is why i'm having issue with cards even with -sintensity 0 and -strap 0 even when these same cards worked without issue before hack

I don't know why, but on some rigs I needed to disable force p2 state, on others not, and I have issue with one gpu on 2 rigs now, so maybe this?

EDIT: hmm so force p2 state for cuda is removed from new drivers, so that is not it

Thanks a lot!
On my rig, I managed to set 0.690V (+150 on core).
On samsung gtx 1060 6gb - 26.5 with strap 1 (+800mem)
On micron gtx 1060 6gb - 24.8 with strap 1 (+500mem)
72W per card.

[br2459]

what about these problem ?




asus prime MB, with 7x rx580
when i run AS ADMIN miner 14.5 claymore
windows 10 pro build 1703
ati drivers 19.4.1

Oh you need to disable Secure boot in your BIOS

[Bojcha]

Windows 7 x64 + AMD Radeon Driver v19.x + 5xRX470 is it real?

AMD Does not support compute mode on Winows7 driver. So no more mining on Win7 and new drivers.

[Bojcha]

@Claymore
All memory brands works fine with -rxboost.. except rare Samsung K4G41325FC (4gb)

[boxraider]

Is there now any way to watch mem errors on nvidia? Because straps brought all the pain from amd tuning, but at least amd reports mem errors which helps a lot to make rigs stable. Now I get to wait 20+ hours just to see one gpu in rig fail and try again.

hey try download HWInfo and when its installed scroll down and look for your gpu settings, its at the bottom of the first gpu box.

[br2459]

Is anyone getting lots of hashrate bounces? I don't remember it being soo extreme. Before it used to be something like 30MH/s then maybe a drop to around 26MH/s or so but I am seeing drops down to 18MH/s sometimes. By before, I mean using a custom bios and version 12 of the miner. Watching the voltage and clock speeds it seems to be doing the same thing. Temps bounce between 53C and 57C along with those.

https://imgur.com/a/Vi4gZn0

Attached are a few screenshots

Yes I get these also and I pretty much have been getting them for the last few years of mining ETH with the RX gpus. I have no idea why they happen. At first I assumed it was because the CPU was busy installing some Windows update or something else was running in the background and later it went back to the normal speed, however an hour later for a few seconds the same thing happened.

I tried different motherboards, different CPUs, more RAM, different OSs, different AMD drivers and basically they all get this issue. Sometimes its 1 GPU and sometimes its another GPU in the rig. I find that, usually the slowdown only affects 1 GPU at a time and never more than 1 so I just left it as is. Its only like this for a few seconds and eventually goes back to the full speed.

If anyone has an idea please let me know, however its a minor issue.

So, it looks like the issue was with the Sapphire RX 480 8GB card. I am now using a Sapphire RX580 8GB Special Edition and it's constant. Very little hashrate drop. Side note it's running 33.2MH/s with -strap 1 and -rxboost -1.