xtoff
Full Member
Offline
Activity: 187
Merit: 100
Tru Reputation Network - Proof of Reputation
|
|
September 05, 2017, 10:10:26 AM |
|
How to return to the previous form of console, After update, the real hashrate is not visible It is very uncomfortable. It also became impossible to fine-tune the frequencies. you can connect with ssh and type h to hashrate report [2017-09-05 12:09:45] : Result accepted by the pool. hHASHRATE REPORT | ID | 10s | 60s | 15m | ID | 10s | 60s | 15m | | 0 | 669.4 | 669.1 | 669.0 | 1 | 736.1 | 736.0 | 735.8 | | 2 | 703.4 | 703.4 | 703.1 | 3 | 740.8 | 740.8 | 740.7 | | 4 | 749.0 | 749.1 | 748.8 | 5 | 709.1 | 709.5 | 709.3 | | 6 | 703.6 | 703.7 | 703.6 | 7 | 703.9 | 703.9 | 703.7 | | 8 | 707.4 | 707.7 | 707.5 | ----------------------------------------------------- Totals: 6422.6 6423.3 6421.5 H/s Highest: 6626.3 H/s
|
|
|
|
ledio
Newbie
Offline
Activity: 39
Merit: 0
|
|
September 05, 2017, 10:13:05 AM |
|
Nuub question for smos, what do I put in the global settings page to get mining eth decred via nicehash? I've tried some but I'm stumped.
any help here? it connects to the server, server rejects and it just retries every 20 seconds Put in config ip address (x.x.x.x:port) of the server instead pool web address.
|
|
|
|
BenScoobert
Member
Offline
Activity: 70
Merit: 10
|
|
September 05, 2017, 10:28:52 AM |
|
Nuub question for smos, what do I put in the global settings page to get mining eth decred via nicehash? I've tried some but I'm stumped.
any help here? it connects to the server, server rejects and it just retries every 20 seconds Put in config ip address (x.x.x.x:port) of the server instead pool web address. Thanks, I got it working with the web address. I've now applied my overclock which I had in windows and I'm only getting 27mh ish a card, I had them at 30.4mh in windows
|
|
|
|
Q600
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 05, 2017, 11:10:02 AM |
|
Hello,
Is possible to have SMOS on both NV and RX drivers?
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
September 05, 2017, 11:31:49 AM |
|
Hello,
Is possible to have SMOS on both NV and RX drivers?
It it but i dont support mixing.
|
|
|
|
crypik
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 05, 2017, 12:42:33 PM |
|
Love your Product, great work a couple of suggestions though, add a description field for each rig, I have different overclock settings because some of my rigs are all Hynix memory and some are all Samsung, some have X cards some have Y cards. Would be nice to have that information next to my rig name on the dashboard. I would love to run different miners or mine different coins on different rigs without the need to create another smos account, because currently every rig runs on the same miner settings. You could make "miner profile" and we could choose what profile to use for each rig. Also would there be an api in the future to monitor or control my rigs? Edit: Nevermind just saw the group option
|
|
|
|
thedue
|
|
September 05, 2017, 12:45:10 PM |
|
Love your Product, great work a couple of suggestions though, add a description field for each rig, I have different overclock settings because some of my rigs are all Hynix memory and some are all Samsung, some have X cards some have Y cards. Would be nice to have that information next to my rig name on the dashboard. I would love to run different miners or mine different coins on different rigs without the need to create another smos account, because currently every rig runs on the same miner settings. You could make "miner profile" and we could choose what profile to use for each rig. Also would there be an api in the future to monitor or control my rigs? What you´re looking for is the grouping feature that is supposed to come with one of the next updates as far as I remember.
|
|
|
|
crypik
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 05, 2017, 12:53:35 PM Last edit: September 05, 2017, 01:05:10 PM by crypik |
|
I think he just released it right on time tytanick you're freaking awesome!!!!
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
September 05, 2017, 01:38:37 PM |
|
I think he just released it right on time tytanick you're freaking awesome!!!! I freaked out catching all 33 rigs in reboot mode..... aha v1123 Somebody test it out - he was testing this feature for the longest time
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
September 05, 2017, 01:44:52 PM Last edit: September 05, 2017, 02:53:14 PM by tytanick |
|
Dashboard update v3018added Rig Grouping feature - now you can create group of rigs with different miner and options added info for how many days will your positive balance last added notes field near every rig and group in which you can write anything you want disabled anoying captcha and replaced by cloudflare rate limiting modified Nvidia OC fields - now you can use negative values to underclock and syntax like: -100,-8,50,40 fix in console view How to add rigs to new group: https://www.youtube.com/watch?v=IA7WbcSJZSkUpdate v1124little fix for registering new rigs
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
September 05, 2017, 02:17:30 PM |
|
Dashboard update v3018 added Rig Grouping feature - now you can create group of rigs with different miner and options added info for how many days will your positive balance last added notes field near every rig and group in which you can write anything you want disabled anoying captcha and replaced by cloudflare rate limiting modified Nvidia OC fields - now you can use negative values to underclock and syntax like: -100,-8,50,40 fix in console view
Update v1124 little fix for registering new rigs
great job - Tytanick. Created 2 groups now in same dashboard with different settings - AMD (group 1) and NVIDIA (group 2). I need a longer LCD screen....
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Yupp82
Newbie
Offline
Activity: 10
Merit: 0
|
|
September 05, 2017, 02:43:42 PM |
|
Dashboard update v3018 added Rig Grouping feature - now you can create group of rigs with different miner and options added info for how many days will your positive balance last added notes field near every rig and group in which you can write anything you want disabled anoying captcha and replaced by cloudflare rate limiting modified Nvidia OC fields - now you can use negative values to underclock and syntax like: -100,-8,50,40 fix in console view
Update v1124 little fix for registering new rigs
You are Great! Thank you. Regards from Poland.
|
|
|
|
andreasdesmedt
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 05, 2017, 04:12:44 PM |
|
Could it be that there are some problems with the Power Limit on nVidia cards? I tried putting it down to 80W through the website, while the screen connected to the miner says "Applying Power Limit: 100" at bootup? It looks like it is not saving these settings? On the Simplemining website it still says 80W...
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
September 05, 2017, 04:21:57 PM |
|
Could it be that there are some problems with the Power Limit on nVidia cards? I tried putting it down to 80W through the website, while the screen connected to the miner says "Applying Power Limit: 100" at bootup? It looks like it is not saving these settings? On the Simplemining website it still says 80W...
If powerlimit minimum is greather than 80then itwill apply minimum possible. Thats hwy when yo put powerlimit 10 watt it will also apply 100. If its a 1080TI then that is the case probably.
|
|
|
|
fgm
Newbie
Offline
Activity: 43
Merit: 0
|
|
September 05, 2017, 04:45:47 PM |
|
Could it be that there are some problems with the Power Limit on nVidia cards? I tried putting it down to 80W through the website, while the screen connected to the miner says "Applying Power Limit: 100" at bootup? It looks like it is not saving these settings? On the Simplemining website it still says 80W...
If powerlimit minimum is greather than 80then itwill apply minimum possible. Thats hwy when yo put powerlimit 10 watt it will also apply 100. If its a 1080TI then that is the case probably. Hello, is there a reason you don't support powerlimit as low as 50% for Nvidia? Because a lot of Nvidia cards run ok with 50% powerlimit, dualmining. For me that's a big drawback becuse all my cards are under 80% powerlimit. All the Nvidia cards that i installed until now required a max powerlimit of 75.
|
|
|
|
Hotmetal
|
|
September 05, 2017, 05:01:45 PM |
|
Hello, is there a reason you don't support powerlimit as low as 50% for Nvidia?
Because a lot of Nvidia cards run ok with 50% powerlimit, dualmining. For me that's a big drawback becuse all my cards are under 80% powerlimit. All the Nvidia cards that i installed until now required a max powerlimit of 75.
My 13x1060's work just fine with a powerlimit of 55% using sMOS.
|
|
|
|
andreasdesmedt
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 05, 2017, 05:20:21 PM |
|
Could it be that there are some problems with the Power Limit on nVidia cards? I tried putting it down to 80W through the website, while the screen connected to the miner says "Applying Power Limit: 100" at bootup? It looks like it is not saving these settings? On the Simplemining website it still says 80W...
If powerlimit minimum is greather than 80then itwill apply minimum possible. Thats hwy when yo put powerlimit 10 watt it will also apply 100. If its a 1080TI then that is the case probably. It's a 1070, is there any way to go lower than the minimum? Or is this set up by the manufacturer of the card?
|
|
|
|
crypik
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 05, 2017, 06:49:38 PM |
|
Could we get an update for Claymore's CryptoNote GPU Miner v9.7
Also When I mine with Claymore 9.7-10.0 eth/sia everything is good no gpu errors when I try to mine with claymore CryptoNote 9.1 overclocked or not I get constant errors "gpu fault detected" what could this be since it does that overclocked and not overclocked?
|
|
|
|
thedue
|
|
September 05, 2017, 06:51:03 PM |
|
As far as I can tell everything works great after the new update! Thanks so much for this feature!! Still happy that I switched to SM back than...
|
|
|
|
Hotmetal
|
|
September 05, 2017, 07:27:57 PM |
|
Could we get an update for Claymore's CryptoNote GPU Miner v9.7
Also When I mine with Claymore 9.7-10.0 eth/sia everything is good no gpu errors when I try to mine with claymore CryptoNote 9.1 overclocked or not I get constant errors "gpu fault detected" what could this be since it does that overclocked and not overclocked?
What GPU are you using?
|
|
|
|
|