ledio
Newbie
Offline
Activity: 39
Merit: 0
|
|
September 06, 2017, 10:15:37 PM |
|
Or we will just buy nvidia
|
|
|
|
potatotda
Newbie
Offline
Activity: 27
Merit: 0
|
|
September 06, 2017, 11:01:53 PM |
|
Hello, is there a reason you don't support powerlimit as low as 50% for Nvidia?
Because a lot of Nvidia cards run ok with 50% powerlimit, dualmining. For me that's a big drawback becuse all my cards are under 80% powerlimit. All the Nvidia cards that i installed until now required a max powerlimit of 75.
My 13x1060's work just fine with a powerlimit of 55% using sMOS. Hi, could you please share your gpu mem clocks and powerlimit conf. Thank you !
|
|
|
|
|
tomoty
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 07, 2017, 01:35:24 AM |
|
Help please,
On Windows my P106 is running stable with 25 MH/S on Claymore with PL: 85, and Mem: + 850, but it seems I can not OC in SMOS, it just running Memclock around 4400, whenerver I set the memclock.
Any thoght or settings wrong around here ?
|
|
|
|
carloshell
Member
Offline
Activity: 61
Merit: 10
|
|
September 07, 2017, 02:05:09 AM |
|
Perfect solution for SMOS would be to have additional two fields (OC page) related to mem/core voltage but as I understand it's not possible. Right?
Its a limitation of the AMD Linux drivers, nothing tytanik can do about it. what do you mean he cant? Ethos already solved it... Cmon tytanic we cant wait anymore. People cant wait for ages. Will start swtiching to ethos or windows soon... Bump, I second that.
|
|
|
|
omac104
Newbie
Offline
Activity: 8
Merit: 0
|
|
September 07, 2017, 04:42:05 AM Last edit: September 07, 2017, 05:19:38 AM by omac104 |
|
Why is my rig on SimpleOS is keeping offline?
|
|
|
|
SlipX
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 07, 2017, 05:05:23 AM |
|
Please tell me what the problem is with my overclocking. on the ETH. The first position is 1, 700 if you put more, the miner will reboot. The second position is 1, 1400 if you put more, the miner will reboot. Maybe the bios setting? The video cards are all p106. Motherboard MSI z270-A PRO. https://cdn1.savepice.ru/uploads/2017/9/7/262d0d1921e4819126d9b2cd50264ff5-full.png
|
|
|
|
IrenaN
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 07, 2017, 05:11:01 AM |
|
Hi All, I have been mining Ethereum and overclocked my cards. Is it safe to switch some to another coin like Monero and let it mine with the same overclock values as Ethereum?
Or, do I have to reset overclock values and test new overclock values for Monero?
same question. anyone? thanks
|
|
|
|
mksmart
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 07, 2017, 07:05:02 AM |
|
Hi How can i turn on or of my rig at SMOS by my SRR ?
is there web interface ?
please add something at simplemining.net to control the SRR
|
|
|
|
ne0x86
Newbie
Offline
Activity: 81
Merit: 0
|
|
September 07, 2017, 07:24:05 AM |
|
Fee desposit page isnt working since yesterday
|
|
|
|
ailikun
|
|
September 07, 2017, 08:29:25 AM |
|
Does anybody use gtx1080 with simplemining? How do they perform?
And the most important part, does the oc function and undervolting work?
|
Komuto Herovato is definitely the chief engineer of bfl)
|
|
|
rhaegonz
Newbie
Offline
Activity: 64
Merit: 0
|
|
September 07, 2017, 10:17:06 AM |
|
Undervolting in linux is already available on ethOS i hope we will see soon on smos ...
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 07, 2017, 10:21:43 AM |
|
@tytanick, I just loaded above image (simpleminer-RX-v1118-17.30-dagfix-computekernel.img) to make some tests with AMD 17.30 GPU drivers. What I see on dashboard is AMDGPU 16.60 (see screen shot).
|
|
|
|
halfson
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 07, 2017, 11:05:25 AM |
|
Hi, I mine on nanopool with two rigs. One of them is by simplemining, the other one via windows10. So if I want to change settings in nanopool I see "incorrect password" warning. I think I see this warning because I don't use my email in mining code below. So how can I solve this. Any idea? -wd 1 -r 1 -epool eth-eu2.nanopool.org:9999 -ewal $wallet/$rig1 -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 "1) Check all the workers use the same email" http://i67.tinypic.com/124zxub.jpgI also try this "$wallet/$rig1/$email", it doesn't work
|
|
|
|
OLDNiCK
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 07, 2017, 12:20:54 PM |
|
Чт 07.09.17 20:43:31 Copying... Чт 07.09.17 20:46:24 Write Error occurred at offset 1,199,505,408 (87) Чт 07.09.17 20:46:24 Cannot write to target, aborting... Чт 07.09.17 20:46:24 Average speed: 6,9 MB/s Чт 07.09.17 20:46:24 Operation terminated at offset 1,199,505,408 LBA 2,342,784 What am I doing wrong?
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
September 07, 2017, 12:23:14 PM |
|
Чт 07.09.17 20:43:31 Copying... Чт 07.09.17 20:46:24 Write Error occurred at offset 1,199,505,408 (87) Чт 07.09.17 20:46:24 Cannot write to target, aborting... Чт 07.09.17 20:46:24 Average speed: 6,9 MB/s Чт 07.09.17 20:46:24 Operation terminated at offset 1,199,505,408 LBA 2,342,784 What am I doing wrong? Whatever drive you are trying to write to is bad.
|
|
|
|
OLDNiCK
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 07, 2017, 12:45:49 PM |
|
I tried old 8 Gb USB flash drive - error occured. Then I used brand new 32 Gb USB flash drive off the box and the same error was logged. I don't think that the problem is with the media. Then I thought of the zip file, it might have been corrupted - downloaded 2nd time. No good - the same error.
|
|
|
|
ATCkit
|
|
September 07, 2017, 01:09:15 PM |
|
Using simpleminer-RX-v1118_dagfix_computekernel.img got only 28.6Mh Video card: Powercolor RX580 8GB with bios update.
What i'm doing wrong?
Take a look at this thread: https://bitcointalk.org/index.php?topic=2068446.0Seems like some GPUs got an increase of 1.5 - 2 Mhs while others got very little gain. For me, I got no gain doing the dag fix on Windows as my cards use Boysie's low power Bios mod. I will try the simpleminer to see if it makes any gain for me. In my reference 480s i'm also using Boysie's low power rom and it worked as I stated earlier: 6 x (RX480 SAPPHIRE REF 8G --> 1095 2080) --> 890W (148,3W/unid) 157,5mh (26,3mh/unid) | 5,65W/mh 950W (158,3W/unid) 172,3mh (28,7mh/unid) | 5,51W/mh (with DAG FIX) Thanks for the positive news. I tried it yesterday on SMOS. After several hours, I got it to work. I discovered that I had to enter my MOBo's BIOS settings and change the PCI Latency timer to 96. Now I get 188 MHS with my 7 x 470s 4gb GPU rig. Core Clock at 1190 & Memory at 1930. I will back off my OC until I find the best efficiency...ie: likely close to your settings.
|
|
|
|
coinbeamer
Member
Offline
Activity: 107
Merit: 11
live long and prosper
|
|
September 07, 2017, 03:43:49 PM |
|
Hey Tytanick, thanx for the grouping stuff!!! Another point that was cool: Somewhere in the headline of the dashboard we need the WHOLE HASHRATE added togehter, maybe even hashrate of different groups.. hasta luego Perfect solution for SMOS would be to have additional two fields (OC page) related to mem/core voltage but as I understand it's not possible. Right?
Its a limitation of the AMD Linux drivers, nothing tytanik can do about it. Me and cryptoscum will be working with this computing kernel and driver to meaby fix this power wattage issues. I am starting to love nvidia over amd but nvidia also has some stupid limitations
|
|
|
|
Vispilio
Legendary
Offline
Activity: 2128
Merit: 1656
|
|
September 07, 2017, 04:20:49 PM |
|
so how do we do the DAG fix if we have RX580's running on SMOS ?..
|
|
|
|
|