SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[alexcrys1]

Anyone know a coin that is using the old swap algo? Believe it was renamed "Super Fast".

I know about FuryCoin, it uses that algo

Thanks Dok!

And algo "Super Fast" is not support by srbminer...

[sharix80]

I would like to see the hashrate as a timredminer. Is it possible? I was able receive more than 520 hashes on the RX550 on XMR.
But I have never seen more than 470 hashes on SRB-miner.

[MATHReX]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

[livada]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

Yes, this is too much. 12000/1500= 8hr/wat

my 6vegahynix use only 980Wfrom the wall and give  11800hr. 11800/980=12hr/wat(1420/920 868mv)
if i use +1100W rig give -13000hr= 13000/1100=11,8hr/wat

[dingdongtobias]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

[kibatronic]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

[livada]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

this is posible only with TRM- srb use much more power

[dingdongtobias]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

vega56 wit 64 bios use ~ 120w? yea right...

[kibatronic]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

vega56 wit 64 bios use ~ 120w? yea right...

They are pulling about 135-140W each (from the wall). I don't know where you got 120W from?

[livada]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

vega56 wit 64 bios use ~ 120w? yea right...

They are pulling about 135-140W each (from the wall). I don't know where you got 120W from?

he to smart but not read your post or have 6 years and not learn * and / in matematic
btw. nice score - 12,6HR/wat is good. samsung rules- hynix bad

[dingdongtobias]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

vega56 wit 64 bios use ~ 120w? yea right...

They are pulling about 135-140W each (from the wall). I don't know where you got 120W from?

he to smart but not read your post or have 6 years and not learn * and / in matematic
btw. nice score - 12,6HR/wat is good. samsung rules- hynix bad

yes you very smart and know how much that rig use W in idle ?
of course you not know

i take assume idle rig use 150w but your rig only 4 gpu so less. 150-180w idle 8xvega rig

140w nice also very

[livada]

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

What is the power consumption for the Vega rig? How much is one GPU consuming through the wall?
My 6x VEGA 56 Rig is doing 12000 H/s (v4 monero) with 1500W from the wall.
Isn't it much? In the previous algo it used to consume 1250-1300W from the wall for the same hashrate.

too much

5 x vega56 SRB 1.8.9 tweak profile 9 and 10 = ~ 1030w from wall and 10500 hs (1450/930 875mv)

Still too much. ;-)

4x watercooled Vega 56 with Vega 64 BIOS, 1401/975MHz 810-820mV in ODNT, ~8200Hs pulling 650W from the wall:

https://i.ibb.co/z8Lwrs7/Quad-Vega56-XMR.png

vega56 wit 64 bios use ~ 120w? yea right...

They are pulling about 135-140W each (from the wall). I don't know where you got 120W from?

he to smart but not read your post or have 6 years and not learn * and / in matematic
btw. nice score - 12,6HR/wat is good. samsung rules- hynix bad

yes you very smart and know how much that rig use W in idle ?
of course you not know

i take assume idle rig use 150w but your rig only 4 gpu so less. 150-180w idle 8xvega rig

140w nice also very

go read again post.
he say 8200hr - he say 4 vega - he say 650W
he dont have 8 vega card- just READ.
140W per car dis normal for TRM
my 6 vega in IDLE use only 85/100W. and rig have 6 extra fan.
your rig  use 150W in IDLE? you must reinstal all and instal again. this is to much for idle.

CNR-6 vega 56 stock - 980/1000W - 100W idle - 900/6=150W card etc...

[raptorman]

Hello Doctor83,

With 1.8.9 the rigs stops after 10-12 hours, and the 1.9.0 make to many compute errors any algorithm with vega 64 cards. The 1.8.8 was works fine. Please check what was the problem.

Cheers.

[doktor83]

Hello Doctor83,

With 1.8.9 the rigs stops after 10-12 hours, and the 1.9.0 make to many compute errors any algorithm with vega 64 cards. The 1.8.8 was works fine. Please check what was the problem.

Cheers.

From 1.8.9 to 1.9.0 nothing changed in kernels, so i don't see a reason for more compute errors.
Can you give more info, a log would be the most helpful i can see almost everything from it.

Maybe you have problems with the embedded binaries (but i dont see any reason why would it cause problems).
You can add --nobinaries in start.bat so they won't be used, try it.

[raptorman]

Hello Doctor83,

With 1.8.9 the rigs stops after 10-12 hours, and the 1.9.0 make to many compute errors any algorithm with vega 64 cards. The 1.8.8 was works fine. Please check what was the problem.

Cheers.

From 1.8.9 to 1.9.0 nothing changed in kernels, so i don't see a reason for more compute errors.
Can you give more info, a log would be the most helpful i can see almost everything from it.

Maybe you have problems with the embedded binaries (but i dont see any reason why would it cause problems).
You can add --nobinaries in start.bat so they won't be used, try it.

Thanks doctor, now works fine!

[doktor83]

Hello Doctor83,

With 1.8.9 the rigs stops after 10-12 hours, and the 1.9.0 make to many compute errors any algorithm with vega 64 cards. The 1.8.8 was works fine. Please check what was the problem.

Cheers.

From 1.8.9 to 1.9.0 nothing changed in kernels, so i don't see a reason for more compute errors.
Can you give more info, a log would be the most helpful i can see almost everything from it.

Maybe you have problems with the embedded binaries (but i dont see any reason why would it cause problems).
You can add --nobinaries in start.bat so they won't be used, try it.

Thanks doctor, now works fine!

Great, but nevertheless, can you send me a log ?

[rainbowminer]

Hello doktor83,

what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?

Thank you for your reply in forward,

RBM

[doktor83]

Hello doktor83,

what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?

Thank you for your reply in forward,

RBM

Every thread is delayed 2 seconds. So if you have 6 gpu, every gpu is running 2 threads, that is 12 threads total so ~ 24 seconds until every gpu starts working.
Except on CN/R, because of the precompilation process. Until precompilation is finished, the gpu is idling.

[rainbowminer]

Hello doktor83,

what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?

Thank you for your reply in forward,

RBM

Every thread is delayed 2 seconds. So if you have 6 gpu, every gpu is running 2 threads, that is 12 threads total so ~ 24 seconds until every gpu starts working.
Except on CN/R, because of the precompilation process. Until precompilation is finished, the gpu is idling.

Super! Thank you very much for the reply.

[KhorneFlake]

Yo, I'm back. A couple of days ago I finished mining another monero with my two 64s. I was on the 1.8.0 but had to update because I didn't mine anything afterwards. So, I'm at 1.9.0 now, and my main GPU never goes to its full potential. Always starts around 1000h/s and just drops and drops over time. Sure, that happened before If I was using anything besides the miner, but now its the case even after fresh restart, and nothing besides the miner is active. Can someone help, or if its a bug could you look at it?

Edit: and now this happened

https://i.imgur.com/Cldv0yT.png