SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[micax1]

I do understand, as a temporary fix, i am starting sgminer first to put fixed fan speed on.
Any more convenient workaround would be great! even temporary. (radeon wattman/afterburner - is not a solution, as it`s not reliable and cannot be deployed/tested fast on hundred of rigs.)

I cannot use your miner directly as ~60C (def temperature fans starts spinup) is too much for lexa cards to mine 24/7.

Just found some workaround myself..

Whoever need ADL fan control after turning off adl w SRBMiner - could use:
https://github.com/BackupGGCode/overdrive5

[doktor83]

hello Doctor, thank you for the miner
I have a question, I'm using right now sgm miner for my RX570 to mine Electroneum, and the performance about 950 h/s
I checked few pages of this tread to find out whet performance figures your miner can do, but fail! I'm sure you have some figures for RX card and vegas, can you put them into the first page?

no because the results are not same for everyone, same cards with different straps can do +-200hs even more.
So there is no exact number, you have to try yourself.

[Krakoziabra]

I do understand, as a temporary fix, i am starting sgminer first to put fixed fan speed on.
Any more convenient workaround would be great! even temporary. (radeon wattman/afterburner - is not a solution, as it`s not reliable and cannot be deployed/tested fast on hundred of rigs.)

I cannot use your miner directly as ~60C (def temperature fans starts spinup) is too much for lexa cards to mine 24/7.

Just found some workaround myself..

Whoever need ADL fan control after turning off adl w SRBMiner - could use:
https://github.com/BackupGGCode/overdrive5

what do you think about msi afterburner?

[micax1]

I do understand, as a temporary fix, i am starting sgminer first to put fixed fan speed on.
Any more convenient workaround would be great! even temporary. (radeon wattman/afterburner - is not a solution, as it`s not reliable and cannot be deployed/tested fast on hundred of rigs.)

I cannot use your miner directly as ~60C (def temperature fans starts spinup) is too much for lexa cards to mine 24/7.

Just found some workaround myself..

Whoever need ADL fan control after turning off adl w SRBMiner - could use:
https://github.com/BackupGGCode/overdrive5

what do you think about msi afterburner?

it does it`s job.(depending on driver if it`s fully compatible)
and it`s ok for small rigs with one type of cards.

[buraz11]

im doing 950 on my rx 570s, also on rx 580s on v7, thank you for the srbminer i think when you implement failover pools if you havent already and do some tweaks this will be a number 1 cryptonight miner

[ivakar]

hello Doctor, thank you for the miner
I have a question, I'm using right now sgm miner for my RX570 to mine Electroneum, and the performance about 950 h/s
I checked few pages of this tread to find out whet performance figures your miner can do, but fail! I'm sure you have some figures for RX card and vegas, can you put them into the first page?

no because the results are not same for everyone, same cards with different straps can do +-200hs even more.
So there is no exact number, you have to try yourself.

really?! such a huge difference?! cause 200 hs it is about 20-25% difference?
hm, ok I will try it myself cause I have modded bios in my rx570 so I will compare and will post the result here
cause,  you know, sorry, but still can't believe in 200 h/s difference between same cards)))

[doktor83]

I do understand, as a temporary fix, i am starting sgminer first to put fixed fan speed on.
Any more convenient workaround would be great! even temporary. (radeon wattman/afterburner - is not a solution, as it`s not reliable and cannot be deployed/tested fast on hundred of rigs.)

I cannot use your miner directly as ~60C (def temperature fans starts spinup) is too much for lexa cards to mine 24/7.

Just found some workaround myself..

Whoever need ADL fan control after turning off adl w SRBMiner - could use:
https://github.com/BackupGGCode/overdrive5

this is quite old, on which cards and drivers is it working for you ?

[novisse]

im doing 950 on my rx 570s, also on rx 580s on v7, thank you for the srbminer i think when you implement failover pools if you havent already and do some tweaks this will be a number 1 cryptonight miner

what are your overclock settings?

my rx 570 4gb are doing a lot better than my 8gb ones. but the highest hashrate I can get is 850. anything above crashes the miner...

[buraz11]

/* Intensity 0-> auto intensity, or value from 1-200  */
"intensity" : 47,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : true,

mem 1950 core 1220

[Fanpant]

Does it work with 7900 series or the R9 290?

[olddarkstar]

Does it work with 7900 series or the R9 290?

Hi there,
just tested it with r7 260 and r9 270 works well

[LeonManveli]

Hi all! how can I add a rig name?

[Krakoziabra]

Hi all! how can I add a rig name?

<YOUR_ADDRESS>.<PAYMENT_ID>+<WORKER_NAME>

[Archangel9999]

hello Doctor, thank you for the miner
I have a question, I'm using right now sgm miner for my RX570 to mine Electroneum, and the performance about 950 h/s
I checked few pages of this tread to find out whet performance figures your miner can do, but fail! I'm sure you have some figures for RX card and vegas, can you put them into the first page?

no because the results are not same for everyone, same cards with different straps can do +-200hs even more.
So there is no exact number, you have to try yourself.

Hello can you please add worker option to the miner ?

Thanks

[alczaty]

hello,
happy ester to all at first !
doktore how i can know which card give me lower hash ? because not same as at overdrivetool. it's different positions
Best regards !
pozdrav

[LeonManveli]

Hi all! how can I add a rig name?

<YOUR_ADDRESS>.<PAYMENT_ID>+<WORKER_NAME>

Thanks

[trifo]

Tested Cryptonight Ultraheavy, IPBC testnet, xmr-stak 960 H/s SRBMiner 1080 H/s... Default config Wish: Target temperature to work...

[peterboy1]

fan control would really be great @dev

i hate it when my fans always turn off and on. i have a feeling that it will degrade faster than a static fan. setting target temp too low will also make the fan try harder, so its a no as well.

[anjanner3]

any plan for cpu support too?

[JuanHungLo]

fan control would really be great @dev

i hate it when my fans always turn off and on. i have a feeling that it will degrade faster than a static fan. setting target temp too low will also make the fan try harder, so its a no as well.

I am working around this with a .bat file utilizing OverdriveNTool.  No problem.