SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Sgsg666]

3*vega 56
ver.:1.4.7
algo:heavy
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE1x riser

4500hr

Mine can only run 1200+ average. Did you biosflash/overclock your vega 56's? My CC is 1408;905 Mem clock: 950;900. Intesity 60, double thread, worksize 8

note: it can run 1300+ average on castxmr.

[1686020563]

1686020563

[1686020563]

1686020563

[1686020563]

1686020563

[1686020563]

1686020563

[1686020563]

1686020563

[gzpc01]

  when does support Linux 

[carlosmonaco]

Hello ,
I'm using 4 RX580 to mine monero ( 3 hynix and one samsung ). But I'm stuck around 900h/s for each.
Clock speed : 1150 or 1200 ( almost the same results) and mem clock :2200.

Is it possible for someone to share settings/bios to get 1000+ h/S on these cards?

[micax1]

V1.4.8
- Added support for new ArtoCash algo
- Added fast pool switching when pressing P
- Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED
- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry
- Minor bug fixes


target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf.

target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT.

Are you planning to fix ADL in near future? at least correct temps and fans. I like your miner, but stuck with 3-rd party utils. and as for each separate rig I need unique config - deployment becomes nightmare )
Thnx!

ADL is working for OverdriveN supported cards. So what should be fixed ?

well I tested it before on multiple rigs, today I just used one -
12*rx550 baffins saphire.

tested without adldisable - Fan speed not detected, temperatures too. can provide screenshots or logs, let me know what you need. (this cards stop fans by default until they are 65, so it`s pretty good chance to burn it right before fans kick in).

[doktor83]

V1.4.8
- Added support for new ArtoCash algo
- Added fast pool switching when pressing P
- Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED
- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry
- Minor bug fixes


target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf.

target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT.

Are you planning to fix ADL in near future? at least correct temps and fans. I like your miner, but stuck with 3-rd party utils. and as for each separate rig I need unique config - deployment becomes nightmare )
Thnx!

ADL is working for OverdriveN supported cards. So what should be fixed ?

well I tested it before on multiple rigs, today I just used one -
12*rx550 baffins saphire.

tested with with adldisable - Fan speed not detected, temperatures too. can provide screenshots or logs, let me know what you need. (this cards stop fans by default until they are 65, so it`s pretty good chance to burn it right before fans kick in).

send me a log without adldisable, ergo with ADL enabled

[micax1]

send me a log without adldisable, ergo with ADL enabled

typo sorry... without adldisabled )

Code:

[2018-04-25 14:50:09] GPU0:    455.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU1:    433.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU2:    445.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU3:    451.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU4:    497.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU5:    494.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU6:    468.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU7:    459.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU8:    488.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU9:    480.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU10:    499.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] GPU11:    453.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-04-25 14:50:09] Total:   5622.0 H/S


-------------------------STATS-------------------------

Algo: normalv7

Mining time: 0 days, 0 hours, 0 minutes, 43 seconds
Pool: cryptonightv7.eu.nicehash.com:3363
Connected since: 2018-04-25 14:49:46
GPU Target Temperature: 55c
Pool Difficulty: 100001
Pool latency: ~166 ms

Accepted/Total shares: 2/2 (100.0%)
Average time to find share: 21 seconds
5 min. average speed: 0 H/s
30 min. average speed: 0 H/s
Max speed: 5690.0 H/s

-------------------------------------------------------

[2018-04-25 14:49:17] AMD Platform ID: 0
[2018-04-25 14:49:17] AMD platform FOUND
[2018-04-25 14:49:17] Found 12 AMD devices
[2018-04-25 14:49:17] GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] ADL is enabled
[2018-04-25 14:49:17] CryptonightV7 mode enabled
[2018-04-25 14:49:17] PcieBusId[0] thread 0 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 1 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 2 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 3 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 4 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 5 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 6 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 7 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 8 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 9 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 10 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 11 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 12 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 13 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 14 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 15 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 16 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 17 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 18 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 19 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 20 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 21 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 22 using OCLKernelID 1
[2018-04-25 14:49:17] PcieBusId[0] thread 23 using OCLKernelID 1
[2018-04-25 14:49:17] Compiling kernel for GPU0 ...
[2018-04-25 14:49:18] Compiling kernel for GPU0 ...
[2018-04-25 14:49:19] Compiling kernel for GPU1 ...
[2018-04-25 14:49:21] Compiling kernel for GPU1 ...
[2018-04-25 14:49:22] Compiling kernel for GPU2 ...
[2018-04-25 14:49:23] Compiling kernel for GPU2 ...
[2018-04-25 14:49:24] Compiling kernel for GPU3 ...
[2018-04-25 14:49:25] Compiling kernel for GPU3 ...
[2018-04-25 14:49:26] Compiling kernel for GPU4 ...
[2018-04-25 14:49:28] Compiling kernel for GPU4 ...
[2018-04-25 14:49:29] Compiling kernel for GPU5 ...
[2018-04-25 14:49:30] Compiling kernel for GPU5 ...
[2018-04-25 14:49:31] Compiling kernel for GPU6 ...
[2018-04-25 14:49:33] Compiling kernel for GPU6 ...
[2018-04-25 14:49:34] Compiling kernel for GPU7 ...
[2018-04-25 14:49:35] Compiling kernel for GPU7 ...
[2018-04-25 14:49:36] Compiling kernel for GPU8 ...
[2018-04-25 14:49:37] Compiling kernel for GPU8 ...
[2018-04-25 14:49:38] Compiling kernel for GPU9 ...
[2018-04-25 14:49:40] Compiling kernel for GPU9 ...
[2018-04-25 14:49:41] Compiling kernel for GPU10 ...
[2018-04-25 14:49:42] Compiling kernel for GPU10 ...
[2018-04-25 14:49:43] Compiling kernel for GPU11 ...
[2018-04-25 14:49:44] Compiling kernel for GPU11 ...
[2018-04-25 14:49:46] ADL init successful
[2018-04-25 14:49:46] Gpu watchdog started
[2018-04-25 14:49:46] watchdog: Setting watchdog array to 0
[2018-04-25 14:49:46] stats: Mining time: 0 days, 0 hours, 0 minutes, 0 seconds
[2018-04-25 14:49:46] stats: GPU Target Temperature: 55
[2018-04-25 14:49:46] on_reconnect: Connecting to cryptonightv7.eu.nicehash.com:3363
[2018-04-25 14:49:46] json_send: {"method":"login","params":{"login":"xxxxxxxxxxxxxxxxxxxxxxx.worker5","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner"},"id":1}
[2018-04-25 14:49:46] json_receive: {"jsonrpc":"2.0","id":1,"error":null,"result":{"id":"905120989173307","status":"OK","job":{"job_id":"00000062a444334c","blob":"0303bed681d7056d7e2f6ddbae0a983cdd54c05533150ddce1bd43136b53118af5a750beab079300000033cae11093e1184eb0ec837d5750920f7e0e81be4f1e561f30638074c9b36800a901","target":"c5a70000"}}}
[2018-04-25 14:49:46] pool_have_job: Pool difficulty: 100001
[2018-04-25 14:49:46] pool_have_job: Pool sent a new job (ID: 00000062a444334c)
[2018-04-25 14:49:49] stats: Mining time: 0 days, 0 hours, 0 minutes, 2 seconds
[2018-04-25 14:49:49] stats: Pool: cryptonightv7.eu.nicehash.com:3363
[2018-04-25 14:49:49] stats: Connected since: 2018-04-25 14:49:46
[2018-04-25 14:49:49] stats: GPU Target Temperature: 55
[2018-04-25 14:49:53] miner_result: Sending user result to pool
[2018-04-25 14:49:53] json_send: {"method":"submit","params":{"id":"905120989173307","job_id":"00000062a444334c","nonce":"36038033","result":"d476b9a4178baab6e35167e2891cd3c4dc0ed94e33c6bb707a917bf8fb960000"},"id":1}
[2018-04-25 14:49:53] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-25 14:49:53] miner_result: Pool accepted result 0x000096FB
[2018-04-25 14:49:55] json_receive: {"params":{"job_id":"00000062a44455e6","blob":"0303e3d681d7051176afc5598cd3d94f0b3e17a484195d742b6a527a864a9003882d1002304c6500000033842331e8b5738497eacf721bb844fbf26996e66886fef2225bcffffbc2214da301","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-25 14:49:55] pool_have_job: Pool sent a new job (ID: 00000062a44455e6)
[2018-04-25 14:49:56] stats: Mining time: 0 days, 0 hours, 0 minutes, 10 seconds
[2018-04-25 14:49:56] stats: Pool: cryptonightv7.eu.nicehash.com:3363
[2018-04-25 14:49:56] stats: Connected since: 2018-04-25 14:49:46
[2018-04-25 14:49:56] stats: GPU Target Temperature: 55
[2018-04-25 14:49:56] stats: Accepted/Total shares: 1/1

[2018-04-25 14:50:24] miner_result: Sending user result to pool
[2018-04-25 14:50:24] json_send: {"method":"submit","params":{"id":"905120989173307","job_id":"00000062a44455e6","nonce":"c5142033","result":"e8eae018415d92f400471ca8fd3e24dde90fedf9e5ce19f63cbc56202d140000"},"id":1}
[2018-04-25 14:50:24] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-25 14:50:26] miner_result: Pool accepted result 0x0000142D
[2018-04-25 14:50:29] stats: Mining time: 0 days, 0 hours, 0 minutes, 43 seconds
[2018-04-25 14:50:29] stats: Pool: cryptonightv7.eu.nicehash.com:3363
[2018-04-25 14:50:29] stats: Connected since: 2018-04-25 14:49:46
[2018-04-25 14:50:29] stats: GPU Target Temperature: 55
[2018-04-25 14:50:29] stats: Accepted/Total shares: 2/2

[2018-04-25 14:50:29] stats: Average time to find share: 21 seconds
[2018-04-25 14:50:46] Stopping miner process

[doktor83]

[2018-04-25 14:49:17] AMD Platform ID: 0
[2018-04-25 14:49:17] AMD platform FOUND
[2018-04-25 14:49:17] Found 12 AMD devices
[2018-04-25 14:49:17] GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
[2018-04-25 14:49:17] GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]

Well BUS id's are not detected , that's the problem.
What is the output of SRBMiner-CN.exe --listdevices ?

[micax1]

Well BUS id's are not detected , that's the problem.
What is the output of SRBMiner-CN.exe --listdevices ?

Code:

C:\SRBMiner>SRBMiner-CN.exe --listdevices
[2018-04-25 15:00:30] Platform #0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] AMD Accelerated Parallel Processing
[2018-04-25 15:00:30] Advanced Micro Devices, Inc.
[2018-04-25 15:00:30] OpenCL 2.1 AMD-APP (2527.7)
[2018-04-25 15:00:30] DEVICES: 13
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [0]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [1]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 10
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [2]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [3]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [4]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [5]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [6]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [7]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [8]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [9]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [10]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [11]
[2018-04-25 15:00:30] Type:GPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 12
[2018-04-25 15:00:30] RAM: 2048 MB
[2018-04-25 15:00:30] BUSID: 0
[2018-04-25 15:00:30]
[2018-04-25 15:00:30] DeviceID [12]
[2018-04-25 15:00:30] Type: CPU
[2018-04-25 15:00:30] Vendor: AMD
[2018-04-25 15:00:30] CU: 2
[2018-04-25 15:00:30] RAM: 4034 MB
[2018-04-25 15:00:30] BUSID: -1
[2018-04-25 15:00:30]
[2018-04-25 15:00:30]

[doktor83]

Is latest Claymore ETH getting BUS id-s for you on the driver you use ?

Like :

GPU #0: Ellesmere (AMD Radeon (TM) RX 480 Graphics), 8178 MB available, 36 compute units (pci bus 2:0:0)

[micax1]

Is latest Claymore ETH getting BUS id-s for you on the driver you use ?

Like :

GPU #0: Ellesmere (AMD Radeon (TM) RX 480 Graphics), 8178 MB available, 36 compute units (pci bus 2:0:0)

Code:

OpenCL initializing...

AMD Cards available: 12
GPU #0: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 460/560
GPU #1: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 2:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 2048 MB available, 10 compute units (pci bus 3:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 4:0:0)
GPU #3 recognized as Radeon RX 460/560
GPU #4: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 5:0:0)
GPU #4 recognized as Radeon RX 460/560
GPU #5: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 6:0:0)
GPU #5 recognized as Radeon RX 460/560
GPU #6: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 8:0:0)
GPU #6 recognized as Radeon RX 460/560
GPU #7: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 11:0:0)
GPU #7 recognized as Radeon RX 460/560
GPU #8: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 12:0:0)
GPU #8 recognized as Radeon RX 460/560
GPU #9: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 13:0:0)
GPU #9 recognized as Radeon RX 460/560
GPU #10: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 14:0:0)
GPU #10 recognized as Radeon RX 460/560
GPU #11: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 15:0:0)
GPU #11 recognized as Radeon RX 460/560
POOL/SOLO version
GPU #0: algorithm ASM 1
GPU #1: algorithm ASM 1
GPU #2: algorithm ASM 1
GPU #3: algorithm ASM 1
GPU #4: algorithm ASM 1
GPU #5: algorithm ASM 1
GPU #6: algorithm ASM 1
GPU #7: algorithm ASM 1
GPU #8: algorithm ASM 1
GPU #9: algorithm ASM 1
GPU #10: algorithm ASM 1
GPU #11: algorithm ASM 1
No NVIDIA CUDA GPUs detected.

[doktor83]

Is latest Claymore ETH getting BUS id-s for you on the driver you use ?

Like :

GPU #0: Ellesmere (AMD Radeon (TM) RX 480 Graphics), 8178 MB available, 36 compute units (pci bus 2:0:0)

Code:

OpenCL initializing...

AMD Cards available: 12
GPU #0: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 460/560
GPU #1: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 2:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 2048 MB available, 10 compute units (pci bus 3:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 4:0:0)
GPU #3 recognized as Radeon RX 460/560
GPU #4: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 5:0:0)
GPU #4 recognized as Radeon RX 460/560
GPU #5: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 6:0:0)
GPU #5 recognized as Radeon RX 460/560
GPU #6: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 8:0:0)
GPU #6 recognized as Radeon RX 460/560
GPU #7: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 11:0:0)
GPU #7 recognized as Radeon RX 460/560
GPU #8: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 12:0:0)
GPU #8 recognized as Radeon RX 460/560
GPU #9: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 13:0:0)
GPU #9 recognized as Radeon RX 460/560
GPU #10: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 14:0:0)
GPU #10 recognized as Radeon RX 460/560
GPU #11: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 15:0:0)
GPU #11 recognized as Radeon RX 460/560
POOL/SOLO version
GPU #0: algorithm ASM 1
GPU #1: algorithm ASM 1
GPU #2: algorithm ASM 1
GPU #3: algorithm ASM 1
GPU #4: algorithm ASM 1
GPU #5: algorithm ASM 1
GPU #6: algorithm ASM 1
GPU #7: algorithm ASM 1
GPU #8: algorithm ASM 1
GPU #9: algorithm ASM 1
GPU #10: algorithm ASM 1
GPU #11: algorithm ASM 1
No NVIDIA CUDA GPUs detected.

Hm, i will try to find a workaround with BUSid detection.

Which drivers are you using?

[livada]

Which driver are you using?

3*vega 56
ver.:1.4.7
algo:heavy
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE1x riser

4500hr
https://image.prntscr.com/image/HEy3Uzj3T7q4xWHxwX4yBQ.jpg

Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23.exe
and wattman

[livada]

3*vega 56
ver.:1.4.7
algo:heavy
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE1x riser

4500hr
https://image.prntscr.com/image/HEy3Uzj3T7q4xWHxwX4yBQ.jpg

so put your clock and mem as you do at gpu 0, 1

2 shtdown if i use clock like 0 and 1. this is maximum for my card

[micax1]

Hm, i will try to find a workaround with BUSid detection.

Which drivers are you using?

this particular machine have 17.12.2.

[livada]

3*vega 56
ver.:1.4.7
algo:heavy
{ "id" : 0, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE16x slot
{ "id" : 2, "intensity" : 56, "worksize" : 16, "threads" : 2}, PCIE1x riser

4500hr
https://image.prntscr.com/image/HEy3Uzj3T7q4xWHxwX4yBQ.jpg

Mine can only run 1200+ average. Did you biosflash/overclock your vega 56's? My CC is 1408;905 Mem clock: 950;900. Intesity 60, double thread, worksize 8

note: it can run 1300+ average on castxmr.

bios 64 on card. gpu mhz and mem mhz see on pictures(1400mhz). 900mv for gpu and mem
mymmemory go on 1100mhz on v7 and 1080mhz on heavy.
intensity 56 - worksize 15 double thread.
in my first post you see al this. why you ask me again this?

4500HR - 510-520W for wall

[livada]

V1.4.8

- Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED
- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry



target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf.

target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT.

WOW. This is very nice option

Thx

[Fast_cris]

This pool: http://pool.arto.cash

Is give some error... can someone help me please... http://i67.tinypic.com/35bi9v9.jpg

[doktor83]

This pool: http://pool.arto.cash

Is give some error... can someone help me please...

they still did not fork, use normal algo, after fork use artocash

[ustcstone]

i like your work，it's really great!very stable!even my english suck，i can't help to post this。 when i use claymore11.3,my rig crash a lot because the "gpu hangs in opencl call"error，but with srbminer and same settings(vddc core memery) ，42 rigs din't crash at all for 24 hours，not even once。i don't have to reboot the crash rig time for time!thank you very much!

[doktor83]

i like your work，it's really great!very stable!even my english suck，i can't help to post this。 when i use claymore11.3,my rig crash a lot because the "gpu hangs in opencl call"error，but with srbminer and same settings(vddc core memery) ，42 rigs din't crash at all for 24 hours，not even once。i don't have to reboot the crash rig time for time!thank you very much!

Its so awesome to read words like this. Thank you my man