lolMiner 1.64: Fastest Kaspa miner in market

[UnclWish]

Quick breaking news:

If you mine ETC with lolMiner you might have seen a high number of "stales" in your dashboard since the last epoch change.
In fact these are not stales, this are rejected shares by the pool.

The reason for them to be flagged stale is because the CPU verify in the miner did approve them, but the pool rejected them.

As things stand this is NOT a miner issue - in fact it rather is one with some of the libraries widely used for ethash share verification.
I am in contact with multiple pool ops to get this fixed for you.

Lolliedieb, on nicehash mining with epoch changes miner sometimes start to mine with 0 mh/s with no GPU use. And it's no 385+ epoch issue. Just after often epoch changes miner stops use GPU and mines with 0 mh/s.
No errors, no stales... Just 0 speed...

[1713913270]

1713913270

[1713913270]

1713913270

[1713913270]

1713913270

[1713913270]

1713913270

[vmgv]

Hi, I have a couple of questions.

I have been working with lolminer for several days, but how do I add another pool? and my email to notify me with Nanopool? Here is my bat:

lolMiner.exe --algo ETHASH --pool eth-us-west1.nanopool.org:9999 --user WALLET.NAME --pass EMAIL? --4g-alloc-size 4000 --keepfree 16
timeout 10

I would like to add a secondary pool of nanopool and should my email go in -pass?


Regards

[bokiminer]

Hi, I have a couple of questions.

I have been working with lolminer for several days, but how do I add another pool? and my email to notify me with Nanopool? Here is my bat:

lolMiner.exe --algo ETHASH --pool eth-us-west1.nanopool.org:9999 --user WALLET.NAME --pass EMAIL? --4g-alloc-size 4000 --keepfree 16
timeout 10

I would like to add a secondary pool of nanopool and should my email go in -pass?


Regards

" To configure fail-over pools the options --pool --user and --pass can be passed multiple times to the miner. They will be processed in order, so the first occurrence belongs to the primary connection, the second to the first fail-over and so on. When the miner looses connection to the primary pool too often (5 times in a short period of time), it will try to connect with the second set of credentials. "

About adding email, try --user wallet.worker/email

So, something like this:
lolMiner.exe --algo ETHASH --pool eth-us-west1.nanopool.org:9999 --user WALLET.RIG/EMAIL --pass x --pool eth-us-east1.nanopool.org:9999 --user WALLET.RIG/EMAIL --pass x

[Lolliedieb]

Lolliedieb, on nicehash mining with epoch changes miner sometimes start to mine with 0 mh/s with no GPU use. And it's no 385+ epoch issue. Just after often epoch changes miner stops use GPU and mines with 0 mh/s.
No errors, no stales... Just 0 speed...

Thanks for bringing this up - seems indeed stopping the main loop is not 100% stable (to restart it clearly after dag rebuild). Will intensively test this for 1.13 to make sure its working.

[joaogti36]

lolieb.. in ethos to activate the ecip1099 is like -coin=ETCHASH?

[yalviert]

hello friends I have this problem does not let me mine with lol miner combining amd and nvidea the drivers that I use for amd are 18.12.3 and those of nvidea 382.05 who can help me



Setup Miner...
 Device 0:
    Name:    Radeon (TM) RX 470 Graphics
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  4096 MByte (4042 MByte free)
    Max epoch (approx): 376
    Active:  true (Selected Algorithm: ETHash)
 Device 1:
    Name:    GeForce GTX 1070
    Address: 2:0
    Vendor:  NVIDIA Corporation
    Memory:  8192 MByte
Problem in building kernel
Build Log: ptxas application ptx input, line 4; fatal   : Unsupported .version 6.0; current version is '5.0'
ptxas fatal   : Ptx assembly aborted due to errors

[Lolliedieb]

lolieb.. in ethos to activate the ecip1099 is like -coin=ETCHASH?

No ... either --coin ETC or --algo ETCHASH or ( --algo ETHASH & --enable-ecip1099) ... pick one of this
--coin ETCHASH will not work ... but replace either ETCHASH by ETC or --coin by --algo and it should work

hello friends I have this problem does not let me mine with lol miner combining amd and nvidea the drivers that I use for amd are 18.12.3 and those of nvidea 382.05 who can help me

...

Build Log: ptxas application ptx input, line 4; fatal   : Unsupported .version 6.0; current version is '5.0'
ptxas fatal   : Ptx assembly aborted due to errors

Ah, my fault ... I only did provide Nvidia kernels for cuda 10 & 11, but not cuda 9 ... Will fix this with 1.13 release (this week)

[Azzgard1980]

hi guys, how can I mine ETH+ZIL on Lolminer ? Is it possible? If Yes, can you suggest an example of a bat file ? best regards

[peteycamey]

when will we be able to use it with miner manager 4.0 that came bundled with claymore?

[iwaschosen]

Lolminer cant find my rx cards on either of my rigs. no problem mining with them on other mining software. Ubuntu 18.04, tried AMDGPU 20.10 and 20.20 drivers. Am I missing something/doing something wrong? heres some output.

michal@rig2:~$ lspci | grep -i vga
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XT [Radeon RX Vega 64] (rev c1)
0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
michal@rig2:~$ sudo ./1.12/lolMiner --list-devices
+---------------------------------------------------------+
|     _       _ __  __ _                   _   _ ____     |
|    | | ___ | |  \/  (_)_ __   ___ _ __  / | / |___ \    |
|    | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | | __) |   |
|    | | (_) | | |  | | | | | |  __/ |    | |_| |/ __/    |
|    |_|\___/|_|_|  |_|_|_| |_|\___|_|    |_(_)_|_____|   |
|                                                         |
|              This software is for mining                |
|              Ethash                                     |
|              Equihash 144/5, 192/7, 210/9               |
|              BeamHash I, II, III                        |
|              ZelHash     (EquihashR 125/4/0)            |
|              Cuck(ar)oo 29                              |
|              Cuckaroo   30 CTX                          |
|              Cuckatoo   31/32                           |
|                                                         |
|                                                         |
|            Made by Lolliedieb, October 2020             |
+---------------------------------------------------------+
List of all detected OpenCL devices:
 Device 0:
    Name:    Radeon RX Vega
    Address: 9:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  8176 MByte (8112 MByte free)

michal@rig2:~$ sudo ./programs/kawpowminer --list-devices


kawpowminer 1.2.3+commit.d46045ef
Build: linux/release/gnu

 Id Pci Id    Type Name                          CL    Total Memory  Cl Max Alloc  Cl Max W.Grp
--- --------- ---- ----------------------------- ----  ------------  ------------  ------------
  0 06:00.0   Gpu  Ellesmere                     Yes        3.99 GB       3.74 GB      256.00 B
  1 09:00.0   Gpu  gfx900                        Yes        7.98 GB       7.73 GB      256.00 B
  2 0a:00.0   Gpu  Ellesmere                     Yes        3.99 GB       3.74 GB      256.00 B
  3 0b:00.0   Gpu  Ellesmere                     Yes        3.98 GB       3.74 GB      256.00 B

[ivomm]

Is there a possibility for -rxboost and -strap parameters for amd polaris cards in some new version of the miner for ethereum?

[jgonzi]

Is there a possibility for -rxboost and -strap parameters for amd polaris cards in some new version of the miner for ethereum?

You can use that directly for example in SMOS or in HiveOS you don't need to do it by the miner. For example in HiveOS you can add the REF 30 for your RX or in SMOS … also the last beta os RaveOS allow you to use the AmdTweak to include this -rxboost or -strap that you are looking for. It is better directly by the OS to do it.

[jgonzi]

Lolminer cant find my rx cards on either of my rigs. no problem mining with them on other mining software. Ubuntu 18.04, tried AMDGPU 20.10 and 20.20 drivers. Am I missing something/doing something wrong? heres some output.

michal@rig2:~$ lspci | grep -i vga
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XT [Radeon RX Vega 64] (rev c1)
0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef)
michal@rig2:~$ sudo ./1.12/lolMiner --list-devices
+---------------------------------------------------------+
|     _       _ __  __ _                   _   _ ____     |
|    | | ___ | |  \/  (_)_ __   ___ _ __  / | / |___ \    |
|    | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | | __) |   |
|    | | (_) | | |  | | | | | |  __/ |    | |_| |/ __/    |
|    |_|\___/|_|_|  |_|_|_| |_|\___|_|    |_(_)_|_____|   |
|                                                         |
|              This software is for mining                |
|              Ethash                                     |
|              Equihash 144/5, 192/7, 210/9               |
|              BeamHash I, II, III                        |
|              ZelHash     (EquihashR 125/4/0)            |
|              Cuck(ar)oo 29                              |
|              Cuckaroo   30 CTX                          |
|              Cuckatoo   31/32                           |
|                                                         |
|                                                         |
|            Made by Lolliedieb, October 2020             |
+---------------------------------------------------------+
List of all detected OpenCL devices:
 Device 0:
    Name:    Radeon RX Vega
    Address: 9:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  8176 MByte (8112 MByte free)

michal@rig2:~$ sudo ./programs/kawpowminer --list-devices


kawpowminer 1.2.3+commit.d46045ef
Build: linux/release/gnu

 Id Pci Id    Type Name                          CL    Total Memory  Cl Max Alloc  Cl Max W.Grp
--- --------- ---- ----------------------------- ----  ------------  ------------  ------------
  0 06:00.0   Gpu  Ellesmere                     Yes        3.99 GB       3.74 GB      256.00 B
  1 09:00.0   Gpu  gfx900                        Yes        7.98 GB       7.73 GB      256.00 B
  2 0a:00.0   Gpu  Ellesmere                     Yes        3.99 GB       3.74 GB      256.00 B
  3 0b:00.0   Gpu  Ellesmere                     Yes        3.98 GB       3.74 GB      256.00 B

Are you trying to mine ETC?... why you don'tr try to put the 1st GPU with the Vega?. That Will make the 1st GPU with 8 Gb. Can you try for example a Coin with less DAG?

[UnclWish]

Where is 1.13 for Windows? On github only for linux...

[iwaschosen]

Are you trying to mine ETC?... why you don'tr try to put the 1st GPU with the Vega?. That Will make the 1st GPU with 8 Gb. Can you try for example a Coin with less DAG?

It was for ether, but the miner itself doesn't see the cards as a cl device. algorithm/coin shouldn't matter when just listing out the available cl devices?

[jgonzi]

Are you trying to mine ETC?... why you don'tr try to put the 1st GPU with the Vega?. That Will make the 1st GPU with 8 Gb. Can you try for example a Coin with less DAG?

It was for ether, but the miner itself doesn't see the cards as a cl device. algorithm/coin shouldn't matter when just listing out the available cl devices?

Why you don't make a prove with the new version? 1.13 only to see if that help.

[ivomm]

Is there a possibility for -rxboost and -strap parameters for amd polaris cards in some new version of the miner for ethereum?

You can use that directly for example in SMOS or in HiveOS you don't need to do it by the miner. For example in HiveOS you can add the REF 30 for your RX or in SMOS … also the last beta os RaveOS allow you to use the AmdTweak to include this -rxboost or -strap that you are looking for. It is better directly by the OS to do it.

I use both OS for my rigs, but I'm talking about Windows. Since I use the card for gaming as well, I don't want to mod the bios.

[jgonzi]

Is there a possibility for -rxboost and -strap parameters for amd polaris cards in some new version of the miner for ethereum?

You can use that directly for example in SMOS or in HiveOS you don't need to do it by the miner. For example in HiveOS you can add the REF 30 for your RX or in SMOS … also the last beta os RaveOS allow you to use the AmdTweak to include this -rxboost or -strap that you are looking for. It is better directly by the OS to do it.

I use both OS for my rigs, but I'm talking about Windows. Since I use the card for gaming as well, I don't want to mod the bios.

In Windows you can use AmdTweak like a line command…

[jgonzi]

I made some test with the new version 1.13, all Navi cards with less Power Consumation. Let's try now the RX ... where is the better improve...

[UnclWish]

Now testing 1.14 version on RX 580 8Gb rigs... Eth on nicehash.