Claymore's CryptoNote AMD GPU Miner v11.3

[AceCobra1]

Any ideas if there is anyway to check my hash rate the last 24 hours ?!

[1714806950]

1714806950

[1714806950]

1714806950

[1714806950]

1714806950

[ivanlabrie]

Do you take in account that on extreme pool your shares "wait" 60 blocks to mature? afaik on minergate shares are immediately sent toy your account

For BCN, 9 hours later, total is ~70K for gpu and 57K for cpu on minergate. I should have more than 100K with GPU.

I managed to connect claymore to minergate, it works, but of course devfee can't connect to it.

DevFee: Failed to invoke login, retry in 5sec...

So, minergate see my miner, but less of what my miner can do (400H/s instead of 500), because the miner spend a lot of time trying to mine for the dev. - and 0 H/s for the dev obviously, and that not the goal.

06/18/14-11:05:51 - SHARE FOUND (target 1936) - (GPU 0)
SOMETHING IS WRONG WITH DEVFEE CONNECTION. STOP MINING.

and sometimes, a disconnect

Speed: 528 h/s, TotalHashes: 455K, DevHashes: 0K Mining time: 00:14

Dev, for making a minergate version of your miner, you "just have" to make a version that send a login + mdp instead of a wallet address (i mean, for the dev fee) or mining for the devfee on a pool of your choice instead of mining on the same as user - for connecting to minergate, i found a workaround.
Please let us the choice where to mine, it's win/win

Can you explain how to connect to minergate?!

Doesn't work here...cpu runs well though. I get better hash with wolf's miner though, compared to their stock one.

[restless]

yes.... merged mining with FCN is the sweet deal with MG

[azhago]

I received several msg asking me to give my workaround for connecting claymore to minergate.
I can give you the solution i found, but it's just for the proof of concept.

Claymore can't connect to the pool for devfee, so the miner try to reconnect every 5 sec, and after some amount of time, stop mining with a message.(something like 5 minutes or so)
Claymore can't merge mine neither, we will need a special miner for that (i think).

But mining on minergate with claymore would be already very good. The best thing you can do if you also want to, is to ask the dev if he could make a version which can.
Claymore is closed source, with 5% fee. I have no problems with that, but please listen to us !

[Claymore]

I received several msg asking me to give my workaround for connecting claymore to minergate.
I can give you the solution i found, but it's just for the proof of concept.

Claymore can't connect to the pool for devfee, so the miner try to reconnect every 5 sec, and after some amount of time, stop mining with a message.(something like 5 minutes or so)
Claymore can't merge mine neither, we will need a special miner for that (i think).

But mining on minergate with claymore would be already very good. The best thing you can do if you also want to, is to ask the dev if he could make a version which can.
Claymore is closed source, with 5% fee. I have no problems with that, but please listen to us !

Ok, I'll add this pool

[azhago]

I received several msg asking me to give my workaround for connecting claymore to minergate.
I can give you the solution i found, but it's just for the proof of concept.

Claymore can't connect to the pool for devfee, so the miner try to reconnect every 5 sec, and after some amount of time, stop mining with a message.(something like 5 minutes or so)
Claymore can't merge mine neither, we will need a special miner for that (i think).

But mining on minergate with claymore would be already very good. The best thing you can do if you also want to, is to ask the dev if he could make a version which can.
Claymore is closed source, with 5% fee. I have no problems with that, but please listen to us !

Ok, I'll add this pool

Thank you VERY MUCH

[Keyboard-Mash]

Hello everyone, there is a thread discussion what you would like to see in an open source GPU miner for Cryptonight algorithm coins here. Please discuss what you would like to see in a GPU miner similar to Claymore's excellent miner

[ivanlabrie]

I received several msg asking me to give my workaround for connecting claymore to minergate.
I can give you the solution i found, but it's just for the proof of concept.

Claymore can't connect to the pool for devfee, so the miner try to reconnect every 5 sec, and after some amount of time, stop mining with a message.(something like 5 minutes or so)
Claymore can't merge mine neither, we will need a special miner for that (i think).

But mining on minergate with claymore would be already very good. The best thing you can do if you also want to, is to ask the dev if he could make a version which can.
Claymore is closed source, with 5% fee. I have no problems with that, but please listen to us !

Ok, I'll add this pool

...and what about merge mine support there?

Hello everyone, there is a thread discussion what you would like to see in an open source GPU miner for Cryptonight algorithm coins here. Please discuss what you would like to see in a GPU miner similar to Claymore's excellent miner

Merge mine support 

[cayars]

Claymore are you using VMPROTECT on the EXE files?

If so that could/would explain a lot of the problems people are having.  It has some problems when dealing directly with hardware.

[TheFuneral]

If you have versions of AMD Drivers later than 13.12 does that cause troubles? Do we need to remove all the AMD drivers and install 13.12 to make this work?

[nrg_wolf]

Claymore are you using VMPROTECT on the EXE files?

If so that could/would explain a lot of the problems people are having.  It has some problems when dealing directly with hardware.

iam pretty sure it does..... use vmprotect

[gregor12]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

[Starscream]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

Problem with the pool. Look at your miner and you'll see that you aren't actually mining (unless you're using the latest version in which you should check the backup pool to see if it swapped).

But anyway, he doesn't mine 100% after a few hours. Been running the miner for days now and it's solid and on the pool all the time.

[gregor12]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

Problem with the pool. Look at your miner and you'll see that you aren't actually mining (unless you're using the latest version in which you should check the backup pool to see if it swapped).

But anyway, he doesn't mine 100% after a few hours. Been running the miner for days now and it's solid and on the pool all the time.

I have 3 backup pools + primary pool, cards are running on 100%, no shares submitted on any of the pools

[cayars]

Claymore are you using VMPROTECT on the EXE files?

If so that could/would explain a lot of the problems people are having.  It has some problems when dealing directly with hardware.

iam pretty sure it does..... use vmprotect

If so it would explain a lot of the memory errors and loosing touch with the hardware.

[Claymore]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

Problem with the pool. Look at your miner and you'll see that you aren't actually mining (unless you're using the latest version in which you should check the backup pool to see if it swapped).

But anyway, he doesn't mine 100% after a few hours. Been running the miner for days now and it's solid and on the pool all the time.

I have 3 backup pools + primary pool, cards are running on 100%, no shares submitted on any of the pools

I'd like to know more details. What does miner show? Does it show that it submits shares? Does it get new jobs?

[Starscream]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

Problem with the pool. Look at your miner and you'll see that you aren't actually mining (unless you're using the latest version in which you should check the backup pool to see if it swapped).

But anyway, he doesn't mine 100% after a few hours. Been running the miner for days now and it's solid and on the pool all the time.

I have 3 backup pools + primary pool, cards are running on 100%, no shares submitted on any of the pools

Try restarting the miner than, dunno what to tell ya. But I know that Claymore isn't stealing, at least not by taking over the miners completely

Also, depending on how you set up your GPUs they could be just stuck at 100% capacity without actually doing any work, for anyone.

[gregor12]

Hmm my miner after few hours mines but on pools it says like im not subbmiting any shares? Did dev set 100% fee after few hours or is this problem with pools?

Problem with the pool. Look at your miner and you'll see that you aren't actually mining (unless you're using the latest version in which you should check the backup pool to see if it swapped).

But anyway, he doesn't mine 100% after a few hours. Been running the miner for days now and it's solid and on the pool all the time.

I have 3 backup pools + primary pool, cards are running on 100%, no shares submitted on any of the pools

Try restarting the miner than, dunno what to tell ya. But I know that Claymore isn't stealing, at least not by taking over the miners completely

Also, depending on how you set up your GPUs they could be just stuck at 100% capacity without actually doing any work, for anyone.

I will keep testing, that happend 2x since yesterday btw.

[Claymore]

Claymore are you using VMPROTECT on the EXE files?

If so that could/would explain a lot of the problems people are having.  It has some problems when dealing directly with hardware.

iam pretty sure it does..... use vmprotect

If so it would explain a lot of the memory errors and loosing touch with the hardware.

Yes I use vmprotect. Do you know a lot about it to state that it's the reason of problems with GPUs? If so, let me know more details, I will be glad to check it.
I always test both original and vmprotect versions on my systems and I never saw any differences for several months in different miners and other software I created.
For CryptoNote miner, for example, both versions don't work until I set pagefile 16GB.
If you have problems with vmprotect - miner will not start on your system at all because it does its job at starting only. If you see at least one line in console after starting - everything works properly.
The problem is in AMD drivers, they don't want to work with large memory sizes. Drivers just don't allow OpenCL app to allocate a lot of GPU memory at once. For example, 290X card has 4GB but OpenCL gives me less than 1GB at once by default. GPU_MAX_ALLOC_PERCENT variable is a solution (I can assign up to 3GB), but buggy solution as you can see. And AMD found a solution - today I tried Catalyst 14.6 and even with GPU_MAX_ALLOC_PERCENT I cannot allocate more than 1GB at once now. So they solved the problem I have a couple of ideas about possible workaround, I hope it will help, new version will be available soon. Anyway, working with AMD OpenCL is some kind of magic which is much more unstable than vmprotect.

[erik_kimmo]

We at MinerGate would be really happy to help Claymore add our pool!
Sent a PM with details.