[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[JACKSEG]

I think the configuration is correct. You cannot change any of the default columns. They just indicate what value (Enabled, Disable or algorithm argument) that will be used if you don't configure a user defined value. If you specify your own value, your value will be used instead of the default value. The default value itself will not change and cannot be modified.

So if you specify "Enabled", this algorithm will be enabled no matter what the default value was. Similar for "Command line argument" column. You cannot modify the default, but you should be able to modify the User defined, and that one will be used no matter what the default was.

I will see if I can change the column headers to make this more clear.

Ok, I understand now, thanks.
I think the colums we can't change, should be gray. It might be easier to understand.


Edit: I can mine with this new algo but I can't add it in "Profit profile".
Save hashrate don't work too.
Have I forgotten anything?

Thanks.

[xChackOx]

Another issue I found is with grouping profiles. I made a profile with the hash rates for 1 GTX1060. This profile have SHA-256 disabled (and other difficult algos too). Then I made a group, added this profile and chose 2 (for my 2 GTX1060). Everything works as it should, except in the Coins and Online Services tab. If I choose the GTX1060 profile in this tab, all the services update correctly and make calculations based on 1 GTX1060, but if I choose the group I made early (2 GTXT1060) then the SHA-256 goes to the top with a high profit. Remember that I disabled this algorithm and even put its hash rate at 0 MH/s. (screenshots)

This might be a display bug - I will take a look.

Thanks for the reply. I found that if I put a value different from 0 (or simply leave it at default) the problem doesn't happen again. So I just left all the disabled algorithms at default value.

The development update looks promising, I'll give it a try.

[Turok2000]

Good afternoon
Every time a new update comes out, there is a problem with installing it on all machines !!!!!
It is necessary to download distributions from your site and update so. At the same time on your site, distributions always appear later than the update goes !!!!
So now I was able to update Awesome Miner but on the machine failed to update Awesome Miner Remote Agent and now I can not switch to other currencies !!!!!!!!!!!!!!!!

[Chapster]

The main idea of the new version is to be much more flexible in configuration of algorithms, pools and mining software. You should be able to add any number of additional algorithms, add new pools (like zpool and more) for these algorithms, and then configure the mining software to use the new algorithms.


The general concept is to have less hardcoded setting in Awesome Miner, and make them configurable as illustrated below. This gives the power users more flexibility and a better understanding of what's going on.

LOVE all these new changes!
I see that you really paid attention to my suggestions!

[YarMiner]

Sorry for stupid question, but I can't find the tutorial about it. I have few rigs on Linux, how can I connect and manage them with Awesome Miner? Thanks!

[digidaly]

Bug report:

Profit switching insists on using EWBF 0.3.4b for NoeoScrypt coins/pools even though EWBF by default is disabled for all algorithms except Equihash (under Managed software.)
This results to EWBF complaining it's receiving the wrong work and producing zero hashes but keeps on running unless stopped or its switching minutes are up.

Using Development Version 3.2.1


But I think AM should be stopping any running software that produce zero hashing for any reason for more than x minutes. That way bugs like this or other issues won't matter so much.

[Gongolo]

Hello.

Maybe I am wrong, but I did as follows.
Since I only have nvidia cards, looking at whattomine I see that it always suggests the following coins: hush, zen, zec, zclassic.
So I added a pool group, with 4 suprnova pools, one for each coin.
Then I added a profit miner, with an "equihash only" profit switching profile, with only EWBF enabled.
In profit switching, I enabled "custom pools", selecting the suprnova pools group.

Starting my new miner, EWBF connect to dwarfpool, that I never configured (maybe that's EWBF default?).

Just to understand: can I use a pools group to make awesome miner switch after checking the most profitable coin at whattomine?

Thank you.

[digidaly]

Hello.

Maybe I am wrong, but I did as follows.
Since I only have nvidia cards, looking at whattomine I see that it always suggests the following coins: hush, zen, zec, zclassic.
So I added a pool group, with 4 suprnova pools, one for each coin.
Then I added a profit miner, with an "equihash only" profit switching profile, with only EWBF enabled.
In profit switching, I enabled "custom pools", selecting the suprnova pools group.

Starting my new miner, EWBF connect to dwarfpool, that I never configured (maybe that's EWBF default?).

Just to understand: can I use a pools group to make awesome miner switch after checking the most profitable coin at whattomine?

Thank you.

The workaround is to delete the default .cfg file that EWBF comes with, otherwise you end up mining full time for someone else.

[Storx]

I know Patrike is busy traveling,

So i wanted to ask others if anyone has gotten Suprnova to work on Awesome Miner, recently i have kinda run into a issue zpool... i started mining the new Skunk algo on that pool, because i was one the very first i received a lot of block rewards and coins, but the pay was not adding up. I followed the coins i mined from immature, to mature, to exchanged and logged all the payouts over the course of the day... the highest i was actually payed was 83% of the LOWEST exchange rate during the 8 hours i mined those coins.. most payouts was around 74% of lowest exchange rate..

So since that little issue i have started mining skunk on suprnova directly and im actually getting paid the correct shares equal the same amount of coins i was mining on zpool, just not getting shorted on the exchange to btc....

Here is the diagnostic data... i think the issue im having is its stuck on "auto" algo when it connects, dont know how to change that in the software.

Mining Engine Process started, PID: 872

====================================================================================================
> *** ccminer SkunkSPmod2 for nVidia GPUs from alexis78@github ***
> *** Built with VC++ 2013 and nVidia CUDA SDK 8.0 (û¼ÙJ)
>
> *** Based on tpruvot@github ccminer
> *** Originally based on Christian Buchner and Christian H. project
> *** Include some of the work of djm34, sp, tsiv and klausT.
>
> [2017-07-26 01:01:16] Starting on stratum+tcp://sigt.suprnova.cc:7106
> [2017-07-26 01:01:16] NVML GPU monitoring enabled.
> [2017-07-26 01:01:16] 3 miner threads started, using 'auto' algorithm.
> [2017-07-26 01:01:17] Stratum difficulty set to 0.01

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed


Here is the settings i have for the pool....When i put in the Suprnova server url, i get a a popup to put the worker name in the wallet address, so i did at first. Tried to connect and i just get stratum authentication error, only way i can get it to actually connect is via placing it in both areas, but it never mines.. it just receives blocks and the gpu sit at 0% load....

[Gongolo]

Hello.

[...]

Starting my new miner, EWBF connect to dwarfpool, that I never configured (maybe that's EWBF default?).

Just to understand: can I use a pools group to make awesome miner switch after checking the most profitable coin at whattomine?

Thank you.

The workaround is to delete the default .cfg file that EWBF comes with, otherwise you end up mining full time for someone else.

Thank you, I will do so.

[Rodrigo8]

I also like AM have NiceHash Miner support.

https://www.nicehash.com/index.jsp?p=api

https://github.com/nicehash/NiceHashMiner/wiki

[Gongolo]

Here is the settings i have for the pool....When i put in the Suprnova server url, i get a a popup to put the worker name in the wallet address, so i did at first. Tried to connect and i just get stratum authentication error, only way i can get it to actually connect is via placing it in both areas, but it never mines.. it just receives blocks and the gpu sit at 0% load....

Hello.

My pool settings with suprnova for zen:

Description:  Suprnova Zencash
Server URL:  stratum+tcp://zen.suprnova.cc:3618
Worker name:  weblogin.worker
Worker password:  x
Coin:  Zencash
Wallet address:

(wallet address field is empty)

It works.

[soothaa]

Does anyone have an example on how to get started with the C# interfaces? I've been doing C# for a couple years but getting started with new tools is always a problem..

EDIT: Grrr the documentation appears to be totally out of date. The documented example of

Code:

    private ContextProvider Context = ScriptManager.Context;

Says that SriptManager does not exist. I even tried referencing all the AwesomeMiner DLLs in addition to the ScriptInterface. Nada. Hopefully dev can reply soon..

[Storx]

Hello.

My pool settings with suprnova for zen:

Description:  Suprnova Zencash
Server URL:  stratum+tcp://zen.suprnova.cc:3618
Worker name:  weblogin.worker
Worker password:  x
Coin:  Zencash
Wallet address:

(wallet address field is empty)

It works.

I did exactly what you said and let it run for a while, then came back to 0 shares processed... i think the issue im having is it is stuck in this "auto" mode, it has no clue what type of block it is or something. AM does not have skunk or signatum add yet, so i manually added skunk algo under algo in options and then under coins i added signatum with algo skunk... but still not working.... not sure how to get it out of auto mode. I have tried multiple different ccminers and they all get stuck in this auto mode...

[Gongolo]

I did exactly what you said and let it run for a while, then came back to 0 shares processed... i think the issue im having is it is stuck in this "auto" mode, it has no clue what type of block it is or something. AM does not have skunk or signatum add yet, so i manually added skunk algo under algo in options and then under coins i added signatum with algo skunk... but still not working.... not sure how to get it out of auto mode. I have tried multiple different ccminers and they all get stuck in this auto mode...

Try to force the algo you want to use. that "auto" seems to be the algorithm.
In your miner properties, click "command line" and add:   -a skunk
Click OK and try.

[Storx]

I did exactly what you said and let it run for a while, then came back to 0 shares processed... i think the issue im having is it is stuck in this "auto" mode, it has no clue what type of block it is or something. AM does not have skunk or signatum add yet, so i manually added skunk algo under algo in options and then under coins i added signatum with algo skunk... but still not working.... not sure how to get it out of auto mode. I have tried multiple different ccminers and they all get stuck in this auto mode...

Try to force the algo you want to use. that "auto" seems to be the algorithm.
In your miner properties, click "command line" and add:   -a skunk
Click OK and try.

Thanks bud, that actually fixed the issue and its up and running, now to move onto the next issue ill run into lol... tell you learn its all a mystery


Do you know if there is a way to add additional pools under online services?

Also, is their an ability to manually add the api for coin info? like i tried to add Signatum, i can manually add the values... but then i have to keep updating it manually....

[Gongolo]

Thanks bud, that actually fixed the issue and its up and running, now to move onto the next issue ill run into lol... tell you learn its all a mystery


Do you know if there is a way to add additional pools under online services?

Also, is their an ability to manually add the api for coin info? like i tried to add Signatum, i can manually add the values... but then i have to keep updating it manually....

Online services: they seems to be hardcoded, I found no way to add a new service.

Api coin info: AM already checks whattomine to get coin statistics, I don't know if it uses WTM also for custom coins (SIGT is available at WTM).
For revenue calculations, AM can get statistics from pool, but again I don't know if it works also for custom coins, I never tried, sorry.

[s3c70r]

I have the pro license and today my electricity went down for an hour.

Once the electricity was back up my rigs did boot up but the awesome miner did not try to restart the miners. They all where in "stopped" state.

Once my electricity came back, it powered my modem/routers but this takes a couple of minutes before I'm back online.

Awesome miner must have tried to start the processes but since it failed to mine ( no internet connection YET ) it stopped after a couple of retries.

After 3 ( i think ) retries awesomeMiner stops retrying and we have to manually start the miner process on each rig.

Is there a way to make it try to start the miner process undefinately in a forever loop ?

Thank for the support.

[Storx]

Has anyone gotten the remote managed miners to work?

I installed Awesome Miner Remote v3.2 on all my rigs, then i went under network scan and found them all under detect via Awesome Miner Remote and setup the same settings as i do mining the software directly on the Awesome Miner software and then press start..... nothing happens on any of the machines.. the buttons across the top go greyed out all except reboot..... so i seem to be stuck at this point... I have rebooted them, press start again and nothing but greying out the buttons occurs.....

So i added all my rigs under me using network scan again, but using detect via ccminer, this works perfectly if im mining on these rigs with my old batch file method, but if i setup the pool and miner in the awesome miner software and run the exact same ccminer as my old batch file uses, it starts up and starts mining on the pool, but the awesome miner computer (my pc in the house) says disconnect... but if i stop mining on awesome miner, start the old batch miner up they come online via the pc im trying to monitor them from...

I still am trying to figure out how to setup port forward on the 2 remote locations i have my other rigs located, it seems to be an issue with the modems being used, because using an online port checker shows the ports still blocked even tho in modem im setting them up to port forward..... sigh

[JACKSEG]

Hello,

Profit switching is not correct in change for me.

If I stop manually and I start, it choose the most advantageous in "Online Services"
The automatic switch changes but remains, always or almost always, on the same algorithm.

I have a hard understanding how auto-profit works

Thanks.