Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Upperscore]

Hi,

New here. I've been mining with PhoenixMiner and just found out I can dual mine. Phoenixminer only supports blake2s which would earn me 1$ a year when I dual mine on my 6xP106-100 6gb miner.

I see that most of the commands are the same with Claymore. Now I'm using this:

commandserver1=PhoenixMiner.exe -pool us1.ethermine.org:4444 -wal MyEthWalletAddress.name -coin eth -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal NicehashBitcoinAddress-dcoin blake2s -log 1 -logfile miner.log

What command would I have to use to mine most profitable on Claymore?

Thanks guys!

You can find many dual examples on the head of this topic.

I know, I went through them. There are a lot of tweaks possible, that's why I'm asking what the most profitable command (for now) could be. Also what coins would that be.

[justoiurii]

At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.

[big_daddy]

At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.

you are mining the wrong dual than
do you have tried ZIL in "custom" dual?
give a try and you'll see the positive results

[informatuss]

At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.

you are mining the wrong dual than
do you have tried ZIL in "custom" dual?
give a try and you'll see the positive results

What do you mean by "custom"?
For long time it's not profitable for me either.

[justoiurii]

I mined ZIL till difficulty was OK. Now the PoW difficulty is damn high. This is one pool's quote: "Please note: At the current difficulty to find a valid share you need around 5 GH/s. So if you mine with 500 MH/s, excluding luck, you need 10 rounds to see earning" (see original at https://zilliqaminer.com/#start_mining)
Any way, for AMD I used https://github.com/DanSoQt/ZilSwitcher, but now stopped.

[big_daddy]

At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.

you are mining the wrong dual than
do you have tried ZIL in "custom" dual?
give a try and you'll see the positive results

What do you mean by "custom"?
For long time it's not profitable for me either.

You are mining for a ~minute every 2 and a half hours, approx
What are you really losing here? I don't get it?

I mined ZIL till difficulty was OK. Now the PoW difficulty is damn high. This is one pool's quote: "Please note: At the current difficulty to find a valid share you need around 5 GH/s. So if you mine with 500 MH/s, excluding luck, you need 10 rounds to see earning" (see original at https://zilliqaminer.com/#start_mining)

depends on how many Mhs of mining speed do you have, but, even small/old rigs can get some ZILs, based on a month

[Pericle13]

Got my stock bios rx 580 and I keep right clicking the batch and run as administrator and it keeps saying this. "Failed, you must run miner with admin rights." in red text. Please Help

right click on the ethminer64.exe file and check the "run as administrator" option. and then run the .bat file

[Juniormkl]

Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.1 (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[Claymore]

v14.2 Beta - Supercharged Edition: 

- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
   Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.

[artful]

where linux version 14.x ?

[Marvell2]

v14.2 Beta - Supercharged Edition: 

- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
   Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.

This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"

when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas

[dingdongtobias]

v14.2 Beta - Supercharged Edition: 

- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
   Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.

This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"

when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas

yes idea is to 'must run miner with admin rights'.
properti compatibility run this program administrator

[Marvell2]

v14.2 Beta - Supercharged Edition: 

- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
   Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.

This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"

when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas

yes idea is to 'must run miner with admin rights'.
properti compatibility run this program administrator

Thanks I got past that , but now I get the  It says it cannot apply strap setting to this device. for all four vega 56 cards

I am running 19.4.3 if that helps any

[laineux]

@Claymore.
You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?

[bategojko74]

@Claymore.
You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?

Ha, ha. You are great optimist. What do you expect that pill makes - it does the same as Claymore straps. If you add -strap 3 to command line (or config file) ten times will you get 500 MH/S?

[RuMiner]

14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)

23:48:41:857   d28   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857   d28   No NVIDIA CUDA GPUs detected.
23:48:41:857   d28   No AMD OPENCL or NVIDIA CUDA GPUs found, exit

14.0 works OK

[br2459]

14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)

23:48:41:857   d28   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857   d28   No NVIDIA CUDA GPUs detected.
23:48:41:857   d28   No AMD OPENCL or NVIDIA CUDA GPUs found, exit

14.0 works OK

I have the same issues with my NVIDIA rigs. I just copied the miner .exe from 12 to the 14 folder and it works fine. It still runs the old 12 code but it at least runs.

[Claymore]

14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)

23:48:41:857   d28   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857   d28   No NVIDIA CUDA GPUs detected.
23:48:41:857   d28   No AMD OPENCL or NVIDIA CUDA GPUs found, exit

14.0 works OK

Ok, I uploaded v14.2 again, added cuda8 build. Download v14.2 again and take files from "cuda8" folder if cuda10 does not work for you.

[RuMiner]

Thanks, now it works ) +6% on P106 with just adding -strap 1 with no other changes

[Jonet]

This is great stuff!

Will the driver installed by EthDcr...exe have any negative impact on other use of the PC like gaming?
Or can I just turn compute on or off and reboot to go from gaming to mining and back?