Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[MikeGR7]

Hello team!

Congratulations on excellent work Claymore!

Pretty old stuff but i want to also confirm a big boost going from 9.6 to 9.7 with my 1060's.
Gonna move to 9.8 when time allows it and give feedback.

Hello everyone,

Its my 1st post on forum so i want to say Hi! so...

Im mining with 2x 5 Asus gtx 1070 i use gpu Tweak II but my cards make only 28-28,5 mh/s
I have set voltage on +100 memory + 1000 and core + 200 (with basic settings i had 25mh/s) but as i can see people can get even 30-31 mh/s on 1070 (i dont use any other programs or bios settings and i use latest drivers for 1070) - heres the question

Can anyone help me with setting my rigs?

Yes i can help you man!

Leave voltage maxed
Leave core speed at +0.
Put memory speed at +600
Put 80% power limit
Max temp limit
Make sure fans max out at above 70 degrees

Tell me how it goes.

[Nokia555]

Latest v9.8 Dual miner monitoring is supported by https://ethmonitoring.com

Regards,
Jaanus

[JustCauseBIH]

How to add delay to start.bat file, for lets say 30 seconds? So when start.bat run auto on windows reboot/start, i want 30 seconds window of miner start. How to do that in Windows 10?

[Nokia555]

How to add delay to start.bat file, for lets say 30 seconds? So when start.bat run auto on windows reboot/start, i want 30 seconds window of miner start. How to do that in Windows 10?

Hi,

Add this before command:

Code:

timeout /t 30

[JustCauseBIH]

Awesome! I think this miner should have this option in FAQ. For example, if you set your miner to auto start, but some configuration are corrupted, or by mistake, remotely saved, you dont have any time to fix it when pc reboot if you use remote connection to your miner. With 30 sec i have enough time to connect and close miner.

[kkourmousis]

Awesome! I think this miner should have this option in FAQ. For example, if you set your miner to auto start, but some configuration are corrupted, or by mistake, remotely saved, you dont have any time to fix it when pc reboot if you use remote connection to your miner. With 30 sec i have enough time to connect and close miner.

You don't have to re-invent the wheel. Those things are around.

I personally use AlwaysUp, it registers my bat as a service, and it provides many options (such us delayed startup, or event dependency on some other services before a service starts)

[vuli]

wow, you download quota on G drive are burned, so I could not download the miner. But than I made a copy to my g drive and I got it down.
 

[akuci]

Question for the dev:

Is there any plan or benefit for implementing CUDA 9.0?

[mano237]

I have one rig with 2x 1060 and 1x 970 and when I try to dual mine eth and sia the 970 eth hashrate is 3 mh..
Can i disable the one 970 card?
Or any other fixes? I already tried older drivers..problem not fixed Same problem on my second rig with 3x 970. I can only get 3mh with 1 card.

[ZenFr]

Thank you Claymoe for this new update (9. of your miner.
I will test it as soon as possible :-).

[Skol600ml]

About this DAG fix - if I get lets say 29mh with my rx 480 now, how much more could I get if AMD fixes the DAG issue?

Its irrelevant as you wont have any profit increase.

Irrelevant for you and your limited vision of the 5 main Etherium coins, profit-auto-switch, nvidia competition, people that won't fix their hashrate and several other reasons not exactly clear for dumb people.

looks like you that kinda guy who drives without a/c to save on petrol

You looks like a fly, that can see things 2-3 months ahead.

[Munhenhos]

Hi guys, i have a little question !
That probally gona sound obvious for you but i have to ask.
My rig run like fine for 48 hours +, i changed the -dcri to a higher setting.
For now i get crash every 3-4 hours with this new value. So i assume when u switch -dcri, u have to adjust OC ?

check power limits. one of my system's gpu has a power limit of 48W, enough to mine ETH at 14MH/s but not enough to mine ETH and DCR at 13MH/s and 300MH/s, so i had to rise it to 54W. The other option is your solution, lower the -dcri.
Best luck

[gm3908]

noob needs help, Issues getting started:

my card info:

18:54:42:893   2e34   ETH: 1 pool is specified
18:54:42:894   2e34   Main Ethereum pool is us1.ethermine.org:4444
18:54:42:894   2e34   DCR: 0 pool is specified
18:54:42:926   2e34   OpenCL platform: NVIDIA CUDA
18:54:42:928   2e34   AMD OpenCL platform not found
18:54:43:096   2e34   CUDA initializing...

18:54:43:097   2e34   NVIDIA Cards available: 1
18:54:43:097   2e34   CUDA Driver Version/Runtime Version: 9.0/6.5
18:54:43:098   2e34   GPU #0: GeForce GT 635, 1024 MB available, 2 compute units, capability: 3.5

18:54:43:099   2e34   Total cards: 1

My error:

ETH: job changed
18:54:13:451   23d0   new buf size: 0
18:54:13:545   2d04   Setting DAG epoch #136...
18:54:15:305   2d04   Setting DAG epoch #136 for GPU0
18:54:15:307   2d04   Create GPU buffer for GPU0
18:54:15:307   2d04   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

18:54:18:309   2d04   Set global fail flag, failed GPU0
18:54:18:310   2d04   GPU 0 failed
18:54:18:310   3494   Setting DAG epoch #136 for GPU0
18:54:18:311   3494   GPU 0, CUDA error 11 - cannot write buffer for DAG

18:54:21:313   3494   Set global fail flag, failed GPU0
18:54:21:314   3494   GPU 0 failed
18:54:23:461   23d0   ETH: checking pool connection...
18:54:23:461   23d0   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:54:23:487   23d0   got 248 bytes

[rgoulter]

Anyone know how to get Claymore 9.7 to detect temp and fan on AMD RX570?  Just displays 0 and 0. Its mining fine but says in the log file it cant detect them?

[Susch]

@gm3908

GPU doesnt have enough VRAM.

2,5 ?/ 3 GB are minimum nowadays.

Thats why you cant create the DAG

[Tarv]

I have one rig with 2x 1060 and 1x 970 and when I try to dual mine eth and sia the 970 eth hashrate is 3 mh..
Can i disable the one 970 card?
Or any other fixes? I already tried older drivers..problem not fixed Same problem on my second rig with 3x 970. I can only get 3mh with 1 card.

Use -di to specify which cards to use, Card ID will show when you start.  If the bad 970 is card 2, use -di 01

Try -dcri to set intensity of the SIA hash. Default is 30, try lower maybe. -dcri 30 (for all cards) or -dcri 30,30,30 (specify each card separately)

Good luck!

[Skol600ml]

Anyone know how to get Claymore 9.7 to detect temp and fan on AMD RX570?  Just displays 0 and 0. Its mining fine but says in the log file it cant detect them?

Make sure you aren't using 17.7.2  drivers or use 9.8 claymore's

[gateway]

Hmm the -tt value doesnt seem to do anything on the NV P106-100 .. fans are getting hot and also MSI afterbuner doesnt see the cards yet..

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1

[Skol600ml]

Hmm the -tt value doesnt seem to do anything on the NV P106-100 .. fans are getting hot and also MSI afterbuner doesnt see the cards yet..

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1

 Note: for NVIDIA cards only temperature monitoring is supported, temperature management is not supported.

It's written in the readme also at the 1st page.

[jmigdlc99]

Wow! Great 9.8 is out and i see support for AMD driver 17.7.2 is also out now. Is it now worth upgrading my drivers?
Last time i tried them i couldnt OC my cards properly bec afterburner didnt support them yet.