MikeGR7
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 03:11:35 PM |
|
Hello team! Congratulations on excellent work Claymore! Pretty old stuff but i want to also confirm a big boost going from 9.6 to 9.7 with my 1060's. Gonna move to 9.8 when time allows it and give feedback. Hello everyone, Its my 1st post on forum so i want to say Hi! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) so... Im mining with 2x 5 Asus gtx 1070 i use gpu Tweak II but my cards make only 28-28,5 mh/s I have set voltage on +100 memory + 1000 and core + 200 (with basic settings i had 25mh/s) but as i can see people can get even 30-31 mh/s on 1070 (i dont use any other programs or bios settings and i use latest drivers for 1070) - heres the question Can anyone help me with setting my rigs? Yes i can help you man! Leave voltage maxed Leave core speed at +0. Put memory speed at +600 Put 80% power limit Max temp limit Make sure fans max out at above 70 degrees Tell me how it goes.
|
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 04:42:17 PM |
|
How to add delay to start.bat file, for lets say 30 seconds? So when start.bat run auto on windows reboot/start, i want 30 seconds window of miner start. How to do that in Windows 10?
|
|
|
|
Nokia555
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 04:44:10 PM |
|
How to add delay to start.bat file, for lets say 30 seconds? So when start.bat run auto on windows reboot/start, i want 30 seconds window of miner start. How to do that in Windows 10?
Hi, Add this before command:
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 04:53:22 PM |
|
Awesome! I think this miner should have this option in FAQ. For example, if you set your miner to auto start, but some configuration are corrupted, or by mistake, remotely saved, you dont have any time to fix it when pc reboot if you use remote connection to your miner. With 30 sec i have enough time to connect and close miner.
|
|
|
|
kkourmousis
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 05:05:45 PM |
|
Awesome! I think this miner should have this option in FAQ. For example, if you set your miner to auto start, but some configuration are corrupted, or by mistake, remotely saved, you dont have any time to fix it when pc reboot if you use remote connection to your miner. With 30 sec i have enough time to connect and close miner.
You don't have to re-invent the wheel. Those things are around. I personally use AlwaysUp, it registers my bat as a service, and it provides many options (such us delayed startup, or event dependency on some other services before a service starts)
|
Buy me a souvlaki: ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx
|
|
|
vuli
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 233
Merit: 100
Andrius | Junior Business developer at Unboxed ICO
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 05:50:54 PM |
|
wow, you download quota on G drive are burned, so I could not download the miner. But than I made a copy to my g drive and I got it down. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
Unboxed - rowing community of people getting paid to do what they love to get a share of the $36 billion brands are spending annually on Facebook Ads
|
|
|
akuci
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 07:33:19 PM |
|
Question for the dev:
Is there any plan or benefit for implementing CUDA 9.0?
|
|
|
|
mano237
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 168
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 08:24:56 PM |
|
I have one rig with 2x 1060 and 1x 970 and when I try to dual mine eth and sia the 970 eth hashrate is 3 mh.. Can i disable the one 970 card? Or any other fixes? I already tried older drivers..problem not fixed ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Same problem on my second rig with 3x 970. I can only get 3mh with 1 card.
|
|
|
|
ZenFr
Legendary
Offline
Activity: 1260
Merit: 1046
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 08:39:32 PM |
|
Thank you Claymoe for this new update (9. ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) of your miner. I will test it as soon as possible :-).
|
|
|
|
Skol600ml
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 09:50:11 PM |
|
About this DAG fix - if I get lets say 29mh with my rx 480 now, how much more could I get if AMD fixes the DAG issue?
Its irrelevant as you wont have any profit increase. Irrelevant for you and your limited vision of the 5 main Etherium coins, profit-auto-switch, nvidia competition, people that won't fix their hashrate and several other reasons not exactly clear for dumb people. looks like you that kinda guy who drives without a/c to save on petrol ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) You looks like a fly, that can see things 2-3 months ahead. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
Munhenhos
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 11:00:43 PM |
|
Hi guys, i have a little question ! That probally gona sound obvious for you but i have to ask. My rig run like fine for 48 hours +, i changed the -dcri to a higher setting. For now i get crash every 3-4 hours with this new value. So i assume when u switch -dcri, u have to adjust OC ?
check power limits. one of my system's gpu has a power limit of 48W, enough to mine ETH at 14MH/s but not enough to mine ETH and DCR at 13MH/s and 300MH/s, so i had to rise it to 54W. The other option is your solution, lower the -dcri. Best luck ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
gm3908
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 11:08:52 PM |
|
noob needs help, Issues getting started:
my card info:
18:54:42:893 2e34 ETH: 1 pool is specified 18:54:42:894 2e34 Main Ethereum pool is us1.ethermine.org:4444 18:54:42:894 2e34 DCR: 0 pool is specified 18:54:42:926 2e34 OpenCL platform: NVIDIA CUDA 18:54:42:928 2e34 AMD OpenCL platform not found 18:54:43:096 2e34 CUDA initializing...
18:54:43:097 2e34 NVIDIA Cards available: 1 18:54:43:097 2e34 CUDA Driver Version/Runtime Version: 9.0/6.5 18:54:43:098 2e34 GPU #0: GeForce GT 635, 1024 MB available, 2 compute units, capability: 3.5
18:54:43:099 2e34 Total cards: 1
My error:
ETH: job changed 18:54:13:451 23d0 new buf size: 0 18:54:13:545 2d04 Setting DAG epoch #136... 18:54:15:305 2d04 Setting DAG epoch #136 for GPU0 18:54:15:307 2d04 Create GPU buffer for GPU0 18:54:15:307 2d04 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
18:54:18:309 2d04 Set global fail flag, failed GPU0 18:54:18:310 2d04 GPU 0 failed 18:54:18:310 3494 Setting DAG epoch #136 for GPU0 18:54:18:311 3494 GPU 0, CUDA error 11 - cannot write buffer for DAG
18:54:21:313 3494 Set global fail flag, failed GPU0 18:54:21:314 3494 GPU 0 failed 18:54:23:461 23d0 ETH: checking pool connection... 18:54:23:461 23d0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:54:23:487 23d0 got 248 bytes
|
|
|
|
rgoulter
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 11:12:47 PM |
|
Anyone know how to get Claymore 9.7 to detect temp and fan on AMD RX570? Just displays 0 and 0. Its mining fine but says in the log file it cant detect them?
|
|
|
|
Susch
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 11:48:37 PM |
|
@gm3908
GPU doesnt have enough VRAM.
2,5 ?/ 3 GB are minimum nowadays.
Thats why you cant create the DAG
|
|
|
|
Tarv
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 02, 2017, 11:57:08 PM |
|
I have one rig with 2x 1060 and 1x 970 and when I try to dual mine eth and sia the 970 eth hashrate is 3 mh.. Can i disable the one 970 card? Or any other fixes? I already tried older drivers..problem not fixed ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Same problem on my second rig with 3x 970. I can only get 3mh with 1 card. Use -di to specify which cards to use, Card ID will show when you start. If the bad 970 is card 2, use -di 01 Try -dcri to set intensity of the SIA hash. Default is 30, try lower maybe. -dcri 30 (for all cards) or -dcri 30,30,30 (specify each card separately) Good luck!
|
|
|
|
Skol600ml
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 12:00:31 AM Last edit: August 03, 2017, 12:15:01 AM by Skol600ml |
|
Anyone know how to get Claymore 9.7 to detect temp and fan on AMD RX570? Just displays 0 and 0. Its mining fine but says in the log file it cant detect them?
Make sure you aren't using 17.7.2 drivers or use 9.8 claymore's
|
|
|
|
gateway
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 12:09:13 AM |
|
Hmm the -tt value doesnt seem to do anything on the NV P106-100 .. fans are getting hot and also MSI afterbuner doesnt see the cards yet..
NVIDIA Cards available: 2 CUDA Driver Version/Runtime Version: 9.0/8.0 GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1
|
|
|
|
Skol600ml
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 12:16:40 AM |
|
Hmm the -tt value doesnt seem to do anything on the NV P106-100 .. fans are getting hot and also MSI afterbuner doesnt see the cards yet..
NVIDIA Cards available: 2 CUDA Driver Version/Runtime Version: 9.0/8.0 GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1
Note: for NVIDIA cards only temperature monitoring is supported, temperature management is not supported. It's written in the readme also at the 1st page.
|
|
|
|
jmigdlc99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2017, 12:19:56 AM |
|
Wow! Great 9.8 is out and i see support for AMD driver 17.7.2 is also out now. Is it now worth upgrading my drivers? Last time i tried them i couldnt OC my cards properly bec afterburner didnt support them yet.
|
0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
|
|
|
|