Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Metroid]

@claymore anyway to use 2 instances of the miner with the same signed driver? or any other way to install a second driver for a second miner instance?

[crypsy]

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

[Boriss]

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

Any reason why you don't want to use enlargement pill in the first place? even Linux mining distros have already included them on the platform with options to enable or disable them so why not use it if it's there?

[dvz35]

Hello,

Mining with Claymore has been working fine for years, but recently getting this error with v14.7

GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU0
Create GPU buffer for GPU0
GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
Setting DAG epoch #272 for GPU1
Create GPU buffer for GPU1....

.....GPU 0 failed
Setting DAG epoch #272 for GPU0
GPU0, OpenCL error -38 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #272 for GPU1
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU 2 failed...
etc,

On Linux/Xubuntu 16 with AMD RX470s 4GB

Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far

-allcoins 273

[crypsy]

Hi, gays. I have 2 1080ti. is there a way to make them hash whit 50+ using only claymores miner.( without eth enlargement pill)?

Any reason why you don't want to use enlargement pill in the first place? even Linux mining distros have already included them on the platform with options to enable or disable them so why not use it if it's there?

It was working just fine until I mixed 1070ti and 1080ti , now the hashrate is all over the place when I start enlargement pill

[BFL88]

Hello,

Mining with Claymore has been working fine for years, but recently getting this error with v14.7

On Linux/Xubuntu 16 with AMD RX470s 4GB

Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far

-allcoins 273

Hey, thanks - tried it - but unfortunately didn't work..!

any other ideas out there.....

[vuli1]

it looks 4GB cards are usless now?

[dvz35]

it looks 4GB cards are usless now?

no! Phoenix is still good https://www.youtube.com/watch?v=P8EdQGm9x74&t=3s

[crypsy]

it looks 4GB cards are usless now?

claymore miner works just fine with my 580 4gb

[Bojcha]

All my 4gb RX's working fine with 14.7, even on 8x h110. winver 1607.

[adaseb]

For everyone who is having issues with the DAG during the new epoch, remove or disable one of your GPUs and see if it works then.

If it works then you most likely need more memory, either virtual or RAM.

If it still doesn't work, then its some software issue.

Hard to diagnose this issue since some people are getting it while other's are not.

[abg00]

For everyone who is having issues with the DAG during the new epoch, remove or disable one of your GPUs and see if it works then.

If it works then you most likely need more memory, either virtual or RAM.

If it still doesn't work, then its some software issue.

Hard to diagnose this issue since some people are getting it while other's are not.

already add 8 gb ram same trouble. test with 3 gpu

[NefariousFool]

There was an issue with the 19.7.2 and 19.7.3 version working with 4gb cards. They work if there's an 8GB card but this is a driver related problem.

19.7.4 dropped this evening, i would say, give that a try if not roll back to 19.7.1 and your 4GB AMD cards will work fine with the Dag files.

Good luck out there!!

Don't forget your Windows based straps have a purpose...

AMD Straps
Strap 1 - Hynix / generic
Strap 4 - Hynix / generic - use lidag 1 - 3 to lower the intensity futher if needed
Strap 2 - Samsung / Micron
Strap 5 - Samsung
strap 3 - Elpida / Micron
Strap 6 - i typically get errors with this strap.


Nvidia straps
strap 1 - Hynix / Micron
strap 2 - Samsung
Strap 3 - Elpida *i've only seen one of these but they do exist

Happy Hashing!

[BFL88]

For everyone who is having issues with the DAG during the new epoch, remove or disable one of your GPUs and see if it works then.

If it works then you most likely need more memory, either virtual or RAM.

If it still doesn't work, then its some software issue.

Hard to diagnose this issue since some people are getting it while other's are not.

tried with only 1 GPU enabled, still not working...

[RIFTGOD]

Hi quick question is it possible to apply -strap 1 using claymore to all my gpu's but one? If so how?

I have one p104 that crashes everytime I try using straps. The rest of my cards are 1070,1060 that are compatible with the strap.

Using claymore 14.6

[badworm]

Hi,

I notice that -li does not 'really' reduce heat and power consomption. Does anyone get a good tune to stabilize ?

[black1ight]

Hi quick question is it possible to apply -strap 1 using claymore to all my gpu's but one? If so how?

I have one p104 that crashes everytime I try using straps. The rest of my cards are 1070,1060 that are compatible with the strap.

Using claymore 14.6

Strap 0 will disable for that gpu. .

Example:
strap 1,2,3,0,5,6  here the fourth gpu (gpu3) no straps will be enabled.

[NefariousFool]

Hi,

I notice that -li does not 'really' reduce heat and power consomption. Does anyone get a good tune to stabilize ?

it just lowers the intensity of which the algo is applied it isn't meant for cooling its meant to help with stability. remember there's 4 settings 0, 1, 2,3

Yes i have it help stability all the time. i have 580's and 570's running 34mhs due to the lidag setting. just helping the intensity a little.

[NefariousFool]

For everyone who is having issues with the DAG during the new epoch, remove or disable one of your GPUs and see if it works then.

If it works then you most likely need more memory, either virtual or RAM.

If it still doesn't work, then its some software issue.

Hard to diagnose this issue since some people are getting it while other's are not.

tried with only 1 GPU enabled, still not working...

Lower your driver version to 19.7.1 or lower and your DAG issue will be resolved.

[abg00]

For everyone who is having issues with the DAG during the new epoch, remove or disable one of your GPUs and see if it works then.

If it works then you most likely need more memory, either virtual or RAM.

If it still doesn't work, then its some software issue.

Hard to diagnose this issue since some people are getting it while other's are not.

tried with only 1 GPU enabled, still not working...

Lower your driver version to 19.7.1 or lower and your DAG issue will be resolved.

same trouble with 18.6.1