[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[citronick]

https://my.pcloud.com/publink/show?code=XZ5chaZO0G4alA7GcumSdCu5aeFkBHwhTgV
Put this in /usr/local/bin and chmod +x

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

I have not been able to get it to build due to a lack of /tmp space to build it :/

When I try to upload amdmeminfo to usr/local/bin , i get access denied . How can I do ?
and what is chmod +x ??

type sudo su to get root access

otherwise

see this https://bitcointalk.org/index.php?topic=1541084.msg19022255#msg19022255

I'm sorry but I don't understand your post :

==
miner@simpleminer:~$ sudo su
root@simpleminer:/home/miner# chmod +x amdmeminfo
root@simpleminer:/home/miner# ./amdmeminfo
AMDMemInfo by Zuikkis <zuikkis@gmail.com>
Updated by Yann St.Arnaud <ystarnaud@gmail.com>
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-1E3471U.S6E
PCI: 01:00.0
OpenCL ID: 0
Subvendor:  0x174b
Subdevice:  0xe347
Sysfs Path: /sys/bus/pci/devices/0000:01:00.0
Memory type: Samsung K4G41325FE
root@simpleminer:/home/miner#
===

this seems to be commandline for already added amdmeminfo ?
But how to add it ?
and what is chmod ?

Credits to konquerer, he has already compiled it
see his post above...

===
https://my.pcloud.com/publink/show?code=XZ5chaZO0G4alA7GcumSdCu5aeFkBHwhTgV
Put this in /usr/local/bin and chmod +x
===

upload it to your rig using mobaxterm

chmod +x is to give amdmeminfo all the right file permissions it needs to run

before running ammeminfo

run

sudo su

then

./amdmeminfo

Citronick, I need your help.
It still don't work or maybe there is something I don't understand.

All you tell me seems to be advice to make amdmeminfo work well once it is installed.

But I don't manage to upload it.
When I go to  /usr/local/bin , and I click upload , and choose the file amdmeminfo (downloaded from here https://my.pcloud.com/publink/show?code=XZ5chaZO0G4alA7GcumSdCu5aeFkBHwhTgV)

I only get permission denied , and I can't go further ...

I don't know how to proceed

using mobaxterm, just upload it to the default directory not "/usr/local/bin"

[1714771566]

1714771566

[1714771566]

1714771566

[dandreark1]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

[Eliavres]

Is there any problem in using only 4gb of system ram to mine? I have an old pc with 4gb DDR2 800, was thinking about throwing a 480 4gb in there and giving it a go..what do you guys think?

[ltcsprite]

Alright this is the 2nd time I have tried using Simple Miner, gave up last time.  But I want it to work.

System boots up via USB stick fine, starts mining.

The rig never shows up in the dashboard, but continues mining.   Even though I have my config set to Claymore 9.4 and custom line to use us1.ethermine.org:4444 it continues to use dwarfpool and the rig never even shows up under the dashboard.

Ideas?

[thedreamer]

Is there a way to set different rigs to mine different pools/algo?

I am testing this system with 2 rigs, one ZEC , one ETH. When selecting the 'OPTIONS:wallets,miner selection' button it changes the pool/eth for both rigs, not just one.

Can this be set somehow individually?

[d57heinz]

Alright this is the 2nd time I have tried using Simple Miner, gave up last time.  But I want it to work.

System boots up via USB stick fine, starts mining.

The rig never shows up in the dashboard, but continues mining.   Even though I have my config set to Claymore 9.4 and custom line to use us1.ethermine.org:4444 it continues to use dwarfpool and the rig never even shows up under the dashboard.

Ideas?

For whatever reason my USB sticks didn't like this software. Tried once with 8gb which turned out to be only 7800mb tho the image is 8000 it seemed to burn ok. Even booted fine the first time. Upon second boot after I changed some config settings it said I was missing some "map". Then it would goto shell prompt. Something about startup.nsh. I'm not too up on my Linux.  Second USB was 32 gb and it said map not found immediately upon first boot.  Ended up giving up on USB and burning over my hdd with smos. Problems solved.  I will say that I've converted 5 rigs over now. 3 rx rigs and two r9 rigs. All run very smooth unlike windows. At least now if it locks up it's not frozen. Rig simply reboots.  Great work OP. Individual pools per rig and the ability to toggle global update of rigs on/off would be great additions to the SW.  Very pleased thus far. Also happy to contribute

BR
d57heinz

[thedreamer]

 Individual pools per rig and the ability to toggle global update of rigs on/off.  Very pleased thus far. Also happy to contribute

BR
d57heinz

How do you set this?

[ltcsprite]

Alright this is the 2nd time I have tried using Simple Miner, gave up last time.  But I want it to work.

System boots up via USB stick fine, starts mining.

The rig never shows up in the dashboard, but continues mining.   Even though I have my config set to Claymore 9.4 and custom line to use us1.ethermine.org:4444 it continues to use dwarfpool and the rig never even shows up under the dashboard.

Ideas?

For whatever reason my USB sticks didn't like this software. Tried once with 8gb which turned out to be only 7800mb tho the image is 8000 it seemed to burn ok. Even booted fine the first time. Upon second boot after I changed some config settings it said I was missing some "map". Then it would goto shell prompt. Something about startup.nsh. I'm not too up on my Linux.  Second USB was 32 gb and it said map not found immediately upon first boot.  Ended up giving up on USB and burning over my hdd with smos. Problems solved.  I will say that I've converted 5 rigs over now. 3 rx rigs and two r9 rigs. All run very smooth unlike windows. At least now if it locks up it's not frozen. Rig simply reboots.  Great work OP. Individual pools per rig and the ability to toggle global update of rigs on/off.  Very pleased thus far. Also happy to contribute

BR
d57heinz

Using a 16GB Sandisk USB stick, it is mining fine, it just won't show up at all under the Simpleminer dashboard.    I sent an email to support, hopefully they can help.

[dandreark1]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

Anybody have a clue how to resolve my issue? I feel like i set the config settings correctly on the dash but it continues to give me that error message^^

Same with nvOC for my nvidia rig..boots up, starts to run, identifies the pool. Then hits me with the same NO AMD OPENCL or NVIDIA CUDA GPU's FOUND..

I've been trying to get this going for days now, i'm so close I just don't know how to resolve this issue now.

[thedreamer]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

Anybody have a clue how to resolve my issue? I feel like i set the config settings correctly on the dash but it continues to give me that error message^^

Same with nvOC for my nvidia rig..boots up, starts to run, identifies the pool. Then hits me with the same NO AMD OPENCL or NVIDIA CUDA GPU's FOUND..

I've been trying to get this going for days now, i'm so close I just don't know how to resolve this issue now.

I haven't tried any rx5xx cards, but with my rx4xx series, the newest image works right off the bat.
I'd say it's not a config issue but a problem with your hardware .
Try setting everything back to original specs and see if you still get that error.

[nu1mlock]

It seems that two out of my three rigs that currently use SimpleMining went down for about 40 minutes tonight, or at least stopped mining. One of the two shows to have been restarted for some reason, while the other doesn't. The third has been running for almost a week without a restart.

Nanopool reports two of the three to have stopped sending shares.

What's the easiest way to access the logs so I can see what really happened?

Thanks

[webxass.de]

Is there a way to set different rigs to mine different pools/algo?

I am testing this system with 2 rigs, one ZEC , one ETH. When selecting the 'OPTIONS:wallets,miner selection' button it changes the pool/eth for both rigs, not just one.

Can this be set somehow individually?

for the moment u would need to use different email adresses ... but grouping feature is in the developer pipe ...

[kanila]

I have a weird issue. I have a dozen rigs 6x470 each. For one of them i get this status on the dashboard.

Miner7   ON(1)   27.73 MH/s 0 H/s    35 47 49 47 53 47 ℃                      1236 466 466 1236 751 (0)
                                                         92 92 92 92 92 92 %                      1750 300 300 1750 300

However, when i open the console window, it shows the following:

ETH: GPU0 4.207 Mh/s, GPU1 25.048 Mh/s, GPU2 25.040 Mh/s, GPU3 25.047 Mh/s, GPU4 25.042 Mh/s, GPU5 25.052 Mh/s
        GPU0 t=35C fan=92%, GPU1 t=53C fan=92%, GPU2 t=54C fan=92%, GPU3 t=54C fan=92%, GPU4 t=59C fan=92%, GPU5 t=53C fan=92%

And this is very consistent. The apparently the dashboard is fetching the data from somewhere else. Now i don't know which of the two provides more accurate information. As far as shares, the rig does 70% compared to the others, which is more or less consistent with the information in the console, and not in the dash board.

Anyone else with the same issue?

[webxass.de]

I have a weird issue. I have a dozen rigs 6x470 each. For one of them i get this status on the dashboard.

Miner7   ON(1)   27.73 MH/s 0 H/s    35 47 49 47 53 47 ℃                      1236 466 466 1236 751 (0)
                                                         92 92 92 92 92 92 %                      1750 300 300 1750 300

However, when i open the console window, it shows the following:

ETH: GPU0 4.207 Mh/s, GPU1 25.048 Mh/s, GPU2 25.040 Mh/s, GPU3 25.047 Mh/s, GPU4 25.042 Mh/s, GPU5 25.052 Mh/s
        GPU0 t=35C fan=92%, GPU1 t=53C fan=92%, GPU2 t=54C fan=92%, GPU3 t=54C fan=92%, GPU4 t=59C fan=92%, GPU5 t=53C fan=92%

And this is very consistent. The apparently the dashboard is fetching the data from somewhere else. Now i don't know which of the two provides more accurate information. As far as shares, the rig does 70% compared to the others, which is more or less consistent with the information in the console, and not in the dash board.

Anyone else with the same issue?

i would suggest reflashing the stick of the rig and deleting the entry out of the dashboard ... dunno if that helps but would be my first intension.

[vg54dett]

using mobaxterm, just upload it to the default directory not "/usr/local/bin"

Awesome thank you ! I wasted so much time trying to upload to usr/local/bin ...

[d57heinz]

 Individual pools per rig and the ability to toggle global update of rigs on/off.  Very pleased thus far. Also happy to contribute

BR
d57heinz

How do you set this?

sorry for the confusion.  seems i didnt complete that sentence like i had intended.  Those features will be great once added

BR

[dandreark1]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

Anybody have a clue how to resolve my issue? I feel like i set the config settings correctly on the dash but it continues to give me that error message^^

Same with nvOC for my nvidia rig..boots up, starts to run, identifies the pool. Then hits me with the same NO AMD OPENCL or NVIDIA CUDA GPU's FOUND..

I've been trying to get this going for days now, i'm so close I just don't know how to resolve this issue now.

I haven't tried any rx5xx cards, but with my rx4xx series, the newest image works right off the bat.
I'd say it's not a config issue but a problem with your hardware .
Try setting everything back to original specs and see if you still get that error.

I ran it with the default settings on smOS dash, the first claymore version at the top of the list. Then tried about all of the options and recieved the same error.. All I did was edit my BTC and ETH wallet at the bottom..tried to run, didn't recognize my GPU's..the same thing's happening to my nvidia gtx 1060 rig though with nvOC.. Same exact message. So I figured whatever I was doing wrong with smOS, I was also doing wrong with my gtx1060's because FullZero had really helped me along with nvOC and had gotten GTX10xx cards running on that software.

I'm praying its not a hardware problem, I've already returned some shit motherboards for my Z97's now for the 6 Pcie ports. Idk where i've gone wrong.

Avoided plug n play's to pioneer ha, and learn everything throughout the process, I mean knowledge is power when it comes to this stuff, and now i'm almost there. Just this error holding me back. If anyone has a suggestion, or can help.. Thanks

[webxass.de]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

Anybody have a clue how to resolve my issue? I feel like i set the config settings correctly on the dash but it continues to give me that error message^^

Same with nvOC for my nvidia rig..boots up, starts to run, identifies the pool. Then hits me with the same NO AMD OPENCL or NVIDIA CUDA GPU's FOUND..

I've been trying to get this going for days now, i'm so close I just don't know how to resolve this issue now.

I haven't tried any rx5xx cards, but with my rx4xx series, the newest image works right off the bat.
I'd say it's not a config issue but a problem with your hardware .
Try setting everything back to original specs and see if you still get that error.

I ran it with the default settings on smOS dash, the first claymore version at the top of the list. Then tried about all of the options and recieved the same error.. All I did was edit my BTC and ETH wallet at the bottom..tried to run, didn't recognize my GPU's..the same thing's happening to my nvidia gtx 1060 rig though with nvOC.. Same exact message. So I figured whatever I was doing wrong with smOS, I was also doing wrong with my gtx1060's because FullZero had really helped me along with nvOC and had gotten GTX10xx cards running on that software.

I'm praying its not a hardware problem, I've already returned some shit motherboards for my Z97's now for the 6 Pcie ports. Idk where i've gone wrong.

Avoided plug n play's to pioneer ha, and learn everything throughout the process, I mean knowledge is power when it comes to this stuff, and now i'm almost there. Just this error holding me back. If anyone has a suggestion, or can help.. Thanks

did u tryd any general OS on that rig? like an ubuntu or windows?

[thedreamer]

 Individual pools per rig and the ability to toggle global update of rigs on/off.  Very pleased thus far. Also happy to contribute

BR
d57heinz

How do you set this?

sorry for the confusion.  seems i didnt complete that sentence like i had intended.  Those features will be great once added

BR

BAH! You tease!! 

Yes they will be great. Also add a password to the accounts, not just a link w/o security.

[dandreark1]

I have two Rx580 rigs I booted simple miner with this evening..it loads on the dash at simplemining.net, but..

It's giving me the "NO AMD OPENCL or NVIDIA CUDA GPU's FOUND, exit"
                            Miner ended/crashed. Restarting miner....

I've tried adjusting the options in the dashboard on simple miner but don't seem to be doing something right here..any help?

Anybody have a clue how to resolve my issue? I feel like i set the config settings correctly on the dash but it continues to give me that error message^^

Same with nvOC for my nvidia rig..boots up, starts to run, identifies the pool. Then hits me with the same NO AMD OPENCL or NVIDIA CUDA GPU's FOUND..

I've been trying to get this going for days now, i'm so close I just don't know how to resolve this issue now.

I haven't tried any rx5xx cards, but with my rx4xx series, the newest image works right off the bat.
I'd say it's not a config issue but a problem with your hardware .
Try setting everything back to original specs and see if you still get that error.

I ran it with the default settings on smOS dash, the first claymore version at the top of the list. Then tried about all of the options and recieved the same error.. All I did was edit my BTC and ETH wallet at the bottom..tried to run, didn't recognize my GPU's..the same thing's happening to my nvidia gtx 1060 rig though with nvOC.. Same exact message. So I figured whatever I was doing wrong with smOS, I was also doing wrong with my gtx1060's because FullZero had really helped me along with nvOC and had gotten GTX10xx cards running on that software.

I'm praying its not a hardware problem, I've already returned some shit motherboards for my Z97's now for the 6 Pcie ports. Idk where i've gone wrong.

Avoided plug n play's to pioneer ha, and learn everything throughout the process, I mean knowledge is power when it comes to this stuff, and now i'm almost there. Just this error holding me back. If anyone has a suggestion, or can help.. Thanks

did u tryd any general OS on that rig? like an ubuntu or windows?

Yeah I originally loaded Ubuntu 17.04 onto all 3 rigs..never loaded any mining software though. Realized it'd be easier to just go with smOS and nvOC bc they were built in clients/OS+software packages. So I went with that..and i'm getting these errors unfortunately