[ mining os ] nvoc

[Alienbert]

What are your cards and what are the OC and power values?
Have you tried zec with dstm ZM miner ?
What is your nvOC version?

Hello! I have 10 gtx1070 and 3 1060. It runs before 1 month without problems. about 5500 sol
I had vers. 1.3 with ZM miner and after this problem i tried 1.4 with ZM and EBWF miner! no chance - same problem

Power 1060 - 90 watt
Power 1070 - 130 watt

Overclock on ZEC core +100 mem +600

[papampi]

What are your cards and what are the OC and power values?
Have you tried zec with dstm ZM miner ?
What is your nvOC version?

Hello! I have 10 gtx1070 and 3 1060. It runs before 1 month without problems. about 5500 sol
I had vers. 1.3 with ZM miner and after this problem i tried 1.4 with ZM and EBWF miner! no chance - same problem

Power 1060 - 90 watt
Power 1070 - 130 watt

Overclock on ZEC core +100 mem +600

Every thing looks normal
Does

Code:

nvidia-smi

Shows correct power values for cards?
Have you tried change the pool?
may be pool has problem

[Rumo]

Hi Papampi

I don't like the nicehash switch because it is mining nicehash only. your script is switching from nicehash to any other coin in the list and back. i totally love your script.

regards

Matze

[MentalNomad]

FYI, Bitcoin Gold (BTG) start date announced:

https://bitcoingold.org/blog/

ANN post:

https://bitcointalk.org/index.php?topic=2380308.msg24308363#msg24308363

[Alienbert]

What are your cards and what are the OC and power values?
Have you tried zec with dstm ZM miner ?
What is your nvOC version?

Hello! I have 10 gtx1070 and 3 1060. It runs before 1 month without problems. about 5500 sol
I had vers. 1.3 with ZM miner and after this problem i tried 1.4 with ZM and EBWF miner! no chance - same problem

Power 1060 - 90 watt
Power 1070 - 130 watt

Overclock on ZEC core +100 mem +600

Every thing looks normal
Does

Code:

nvidia-smi

Shows correct power values for cards?
Have you tried change the pool?
may be pool has problem

No the pool isnt the Problem! i tried ZEC again an no 4 Cards starts working short time than terminated!
On ETH all cards works but not all time with 100%
1 Month runs all great.

This message isnt normal or?
Thu Nov  9 10:59:02 MST 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures

So i think some problems with Power

[Rumo]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.   

[papampi]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.  

Yup, sorry for typo
Here is latest minerinfo
Download and put it in

Code:

 /home/m1/www/cgi-bin/

Then run

Code:

chmod +x  /home/m1/www/cgi-bin/minerinfo

Algo-log ?
My switch put history and logs in 8_wtmautoswitchlog

[Rumo]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.  

Yup, sorry for typo
Here is latest minerinfo
Download and put it in

Code:

 /home/m1/www/cgi-bin/

Then run

Code:

chmod +x  /home/m1/www/cgi-bin/minerinfo

Algo-log ?
My switch put history and logs in 8_wtmautoswitchlog

8_wtmautoswitchlog is empty as well.

[dartec]

FYI, Bitcoin Gold (BTG) start date announced:

https://bitcoingold.org/blog/

ANN post:

https://bitcointalk.org/index.php?topic=2380308.msg24308363#msg24308363

Cheers ...

Thank you for this.

[dartec]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.  

Yup, sorry for typo
Here is latest minerinfo
Download and put it in

Code:

 /home/m1/www/cgi-bin/

Then run

Code:

chmod +x  /home/m1/www/cgi-bin/minerinfo

Algo-log ?
My switch put history and logs in 8_wtmautoswitchlog

I did not even know that their was a web server running on nvOC until I read this post .... :-(

[Rumo]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.  

Yup, sorry for typo
Here is latest minerinfo
Download and put it in

Code:

 /home/m1/www/cgi-bin/

Then run

Code:

chmod +x  /home/m1/www/cgi-bin/minerinfo

Algo-log ?
My switch put history and logs in 8_wtmautoswitchlog

Your welcome ;-)

I did not even know that their was a web server running on nvOC until I read this post .... :-(

Your welcome ;-)

[papampi]

@Papampi

in your www script you have 4 typos. You used enbaled instead of enabled

and do you have an idea why my algo log is empty? I can's see the WTM history in the web page.  

Yup, sorry for typo
Here is latest minerinfo
Download and put it in

Code:

 /home/m1/www/cgi-bin/

Then run

Code:

chmod +x  /home/m1/www/cgi-bin/minerinfo

Algo-log ?
My switch put history and logs in 8_wtmautoswitchlog

I did not even know that their was a web server running on nvOC until I read this post .... :-(

Read 19-1.3 change log in first page

[Rumo]

to be honest to read through 270 pages is a pain. Maybe a forum style would be better as a blog with so much information.

[Rumo]

I imaged a new ssd today and it is not using the 1bash from the windows partition. The partition was not mounted. Not a Problem but maybe something you wanna fix.

[Stubo]

I imaged a new ssd today and it is not using the 1bash from the windows partition. The partition was not mounted. Not a Problem but maybe something you wanna fix.

I have seen that file there before and often wondered what it was there for as I have never used it. Instead, I just have my pre-modified 1bash/3main/wdog scripts ready to drop-in via WinSCP after the first reboot on a newly upgraded system. Then I reboot again and start mining...

[Hostels]

Hello guys. I got bug from one of my rig on asrock h110 pro btc+ on 13xP106
In bash i have +1400 for memory on all cards.
After claymore start gpu0,2,4,6,8,10,12 work on 1400 memory
gpu 1,3,5,7,9,11 work on 0 memory.
http://pixs.ru/showimage/Bagpng_6209340_28250688.png

After that i connect to rig via putty and write.
nvidia-settings -c :0 -a "[gpu:1]/GPUMemoryTransferRateOffset[2]=1400"
nvidia-settings -c :0 -a "[gpu:3]/GPUMemoryTransferRateOffset[2]=1400"
nvidia-settings -c :0 -a "[gpu:5]/GPUMemoryTransferRateOffset[2]=1400"
nvidia-settings -c :0 -a "[gpu:7]/GPUMemoryTransferRateOffset[2]=1400"
nvidia-settings -c :0 -a "[gpu:9]/GPUMemoryTransferRateOffset[2]=1400"
nvidia-settings -c :0 -a "[gpu:11]/GPUMemoryTransferRateOffset[2]=1400"

After that all cards work on +1400 memory.

I try Individual OC. Dosent work too(

What to do for normal work at miner start? Help plz

[Zucca]

I added the nicehash stuff to the wtm autoswitch coins if someone is interested.

1. ADD
NICE_SKUNKHASH;NICE_EQUIHASH;NICE_ETHASH;NICE_NEOSCRYPT;NICE_X11GOST;NICE_CRYPTONIGHT;NICE_LYRA2REV2
to the WTM coins in 1bash.

2. in WTM_AUTO_SWITCH Change
# filter WTM coins by user selection only
for i in reversed(data):
    if i["tag"] not in includedCoins:
        data.remove(i)

to

# filter WTM coins by user selection only
for i in reversed(data):
    if i["tag"] == "NICEHASH":
       i["tag"] = "NICE_" + i["algorithm"].upper()

for i in reversed(data):
    if i["tag"] not in includedCoins:
       data.remove(i)

3. in PAPAMPI_WTM change the TOP_COIN= line to TOP_COIN=$(cat WTM_top_coin | grep : | sed 's/:[0-9]*//')

4. ADD

NICEHASH_BTC_ADDRESS="Your nicehash BTC address here"

and

#NICE_LYRA2REV2
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS=$NICEHASH_BTC_ADDRESS
NICE_LYRA2REV2_POOL="stratum+tcp://lyra2rev2.eu.nicehash.com:3347"
NICE_LYRA2REV2_INTENSITY="21"

#NICE_NEOSCRYPT
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_NEOSCRYPT_POOL="stratum+tcp://neoscrypt.eu.nicehash.com:3341"
NICE_NEOSCRYPT_INTENSITY="21"

#NICE_CRYPTONIGHT
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_CRYPTONIGHT_POOL="stratum+tcp://cryptonight.eu.nicehash.com:3355"
NICE_CRYPTONIGHT_INTENSITY="21"

#NICE_X11GOST
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_X11GOST_POOL="stratum+tcp://x11gost.eu.nicehash.com:3359"
NICE_X11GOST_INTENSITY="21"

#NICE_SKUNKHASH
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_SKUNKHASH_POOL="stratum+tcp://skunk.eu.nicehash.com:3362"
NICE_SKUNKHASH_INTENSITY="21"

to your coins in 1bash

5. ADD

########################################################## Nicehash ###############################################
########################################################## Nicehash ###############################################
########################################################## Nicehash ###############################################

if [ $COIN == "DUAL_NICEHASH" ]
then

HCD=/home/m1/eth/$CLAYMORE_VERSION/ethdcrminer64

ETHASH_ADDR="$DUAL_BTC_ADDRESS.$DUAL_WORKER"
DCR_ADDR="$DUAL_BTC_ADDRESS.$DUAL_WORKER"

screen -dmSL miner $HCD -epool $DUAL_ETHASH_POOL -ewal $ETHASH_ADDR -epsw x -allcoins 1 -allpools 1 -dpool $DUAL_DCR_POOL -dwal $DCR_ADDR -dpsw x $DUAL_EXTENSION_ARGUMENTS

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $COIN == "NICE_NEOSCRYPT" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a neoscrypt -o $NICE_NEOSCRYPT_POOL -u $ADDR -p x -i $PXC_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $COIN == "NICE_LYRA2REV2" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a lyra2v2 -o $NICE_LYRA2REV2_POOL -u $ADDR -p x -i $NICE_LYRA2REV2_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $COIN == "NICE_X11GOST" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a sib -o $NICE_X11GOST_POOL -u $ADDR -p x -i $NICE_X11GOST_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $COIN == "NICE_SKUNKHASH" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a skunk -o $NICE_SKUNKHASH_POOL -u $ADDR -p x -i $NICE_SKUNKHASH_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $COIN == "NICE_CRYPTONIGHT" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a cryptonight -o $NICE_CRYPTONIGHT_POOL -u $ADDR -p x -i $NICE_CRYPTONIGHT_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

########################################################## Nicehash ###############################################
########################################################## Nicehash ###############################################
########################################################## Nicehash ###############################################

to 3main

Hope this helps

regards

Matze

I want to mine NICEHASH_Cryptonight

I only have to add this code to oneBash?

[Rumo]

You need the NICE_CRYPTONIGHT part from 1bash and 3main

in 1bash add:

Code:

NICEHASH_BTC_ADDRESS="Your nicehash BTC address here"

#NICE_CRYPTONIGHT
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_CRYPTONIGHT_POOL="stratum+tcp://cryptonight.eu.nicehash.com:3355"
NICE_CRYPTONIGHT_INTENSITY="21"

and in 3main add

Code:

if [ $COIN == "NICE_CRYPTONIGHT" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a cryptonight -o $NICE_CRYPTONIGHT_POOL -u $ADDR -p x -i $NICE_CRYPTONIGHT_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

[Zucca]

You need the NICE_CRYPTONIGHT part from 1bash and 3main

in 1bash add:

Code:

NICEHASH_BTC_ADDRESS="Your nicehash BTC address here"

#NICE_CRYPTONIGHT
NICE_WORKER="$WORKERNAME"
NICE_ADDRESS="$NICEHASH_BTC_ADDRESS"
NICE_CRYPTONIGHT_POOL="stratum+tcp://cryptonight.eu.nicehash.com:3355"
NICE_CRYPTONIGHT_INTENSITY="21"

and in 3main add

Code:

if [ $COIN == "NICE_CRYPTONIGHT" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$NICE_ADDRESS.$NICE_WORKER"

screen -dmSLL miner $HCD -a cryptonight -o $NICE_CRYPTONIGHT_POOL -u $ADDR -p x -i $NICE_CRYPTONIGHT_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

THank you!! What versions of nvOc are compatible with this modification?

[Rumo]

As far as i know all the 19.X. I started mining with 19 so I don't know the older ones.

BTW. TPccminer has problems with more than 8 cards. So if you running a bigger rig it can be problematic to get cryptonight running.