Biggen1
Newbie
Offline
Activity: 64
Merit: 0
|
|
January 20, 2018, 02:01:36 PM |
|
We need a mod to clean the posts from these rat commie bastards that keep coming in here and shitting on the best Equihash miner available.
You guys that don't believe in capitalism and making a profit can go join the rest of the liberals and head to North Korea as far as I'm concerned.
|
|
|
|
poby
|
|
January 20, 2018, 02:11:05 PM |
|
We need a mod to clean the posts from these rat commie bastards that keep coming in here and shitting on the best Equihash miner available.
You guys that don't believe in capitalism and making a profit can go join the rest of the liberals and head to North Korea as far as I'm concerned.
Couldn't have said it better myself! The fee should be set to maximise profit for the DEVs. i.e. too high and you lose too many people, too low and you aren't making optimal profit. This is a business and no reason to think it's a philanthropic one. I can't believe the greed of those complaining about a 2% fee! It's like 10 cents in every $5 of revenue. I can only assume they have been indoctrinated by the Liberal MSM so they think socialism works economically.
|
|
|
|
BansheeHero
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 20, 2018, 02:29:28 PM |
|
We need a mod to clean the posts from these rat commie bastards that keep coming in here and shitting on the best Equihash miner available.
You guys that don't believe in capitalism and making a profit can go join the rest of the liberals and head to North Korea as far as I'm concerned.
We need a mod to clean the posts from these rat commie bastards that keep coming in here and shitting on the best Equihash miner available.
You guys that don't believe in capitalism and making a profit can go join the rest of the liberals and head to North Korea as far as I'm concerned.
Couldn't have said it better myself! The fee should be set to maximise profit for the DEVs. i.e. too high and you lose too many people, too low and you aren't making optimal profit. This is a business and no reason to think it's a philanthropic one. I can't believe the greed of those complaining about a 2% fee! It's like 10 cents in every $5 of revenue. I can only assume they have been indoctrinated by the Liberal MSM so they think socialism works economically. Guys you are making the problem worse, You are a cheap replacement for a Chinese web farmer.
|
|
|
|
fecker
Jr. Member
Offline
Activity: 30
Merit: 3
|
|
January 20, 2018, 03:10:09 PM |
|
Then you and the fecker guy should stop complaining about the fee. Take it or leave it, bitching about it won't change it as dtsm stated he won't change it.
And you mistr stop talking for him. Thanks Like I said... GDDR5X cards have crap support and dont yeld any exceptional Sols. Make better support for 1080/1080Ti, give us more sols, and I am sure more ppl will use DTSM and will even be "ok" with the fee..... Unless this happens, and unless he realizes that this should be no.1 priority for him, I will still say EKWB is better for any 1080/1080Ti rigs.
|
|
|
|
PickAxe131
Newbie
Offline
Activity: 30
Merit: 0
|
|
January 20, 2018, 03:13:45 PM |
|
Then you and the fecker guy should stop complaining about the fee. Take it or leave it, bitching about it won't change it as dtsm stated he won't change it.
And you mistr stop talking for him. Thanks Like I said... GDDR5X cards have crap support and dont yeld any exceptional Sols. Make better support for 1080/1080Ti, give us more sols, and I am sure more ppl will use DTSM and will even be "ok" with the fee..... Unless this happens, and unless he realizes that this should be no.1 priority for him, I will still say EKWB is better for any 1080/1080Ti rigs. There are very much "Give us this and give us that". Please take your 2% and go to EWBF and stop bitching like an immature child.
|
|
|
|
FloridaCoin
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 20, 2018, 04:56:36 PM |
|
There are very much "Give us this and give us that". Please take your 2% and go to EWBF and stop bitching like an immature child.
I wonder how long any of us would work for no pay? Developers want to get paid for thier work the same as we expect to be compensated when we work. Costs and Fees are just a normal part of commerce. DSTM keep developing and supporting the program and my little miners will happily send you your pay.
|
|
|
|
FloridaCoin
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 20, 2018, 05:17:56 PM |
|
Mine has been running solid. 5x1070ti/8gb/SMoS/H81 BTC-Pro R.2/G3250
|
|
|
|
cryptoyes
Member
Offline
Activity: 297
Merit: 10
|
|
January 20, 2018, 07:38:17 PM Last edit: January 20, 2018, 08:18:41 PM by cryptoyes |
|
what is the proper command line to connect to miningrigrentals? I keep getting 2018-01-20 19:36:15|# connected to: eu-01.miningrigrentals.com:3333 2018-01-20 19:36:15|unknown method client.reconnect 2018-01-20 19:36:15|recv: Connection reset by peer
no matter what I try Is there something I need to enable on miningrigrentals side? I already created a worker for equihash and added a pool for when it's not rented (it's currently marked as unavailable because I wanted to test that it works) I also tried to get my own port in miningrigrentals GUI (says I can do taht if my miner doesn't support method.reconnect), and when connecting to that I get: 2018-01-20 19:52:58|# connected to: eu-01.miningrigrentals.com:50607 2018-01-20 19:53:04|# connection closed by server r:0
EDIT: Seems it was just a matter of waiting 10 minutes after adding the pool or rig or my own port (I don't know which triggered it) ... it now works.
|
|
|
|
doroty
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 20, 2018, 08:52:27 PM |
|
Get acrefawn's automonitor and Limit TDP by locking voltage in AB rather than setting max TDP (ctrl+f > select point > L > Apply)
what the heck is this tool?? google dont find anything seems
|
|
|
|
Deathman20
Newbie
Offline
Activity: 33
Merit: 0
|
|
January 20, 2018, 09:09:10 PM |
|
Get acrefawn's automonitor and Limit TDP by locking voltage in AB rather than setting max TDP (ctrl+f > select point > L > Apply)
what the heck is this tool?? google dont find anything seems Hes talking about the frequency chart in MSI Afterburner that is on nVidia cards. Typically its used for trying to maximize the OC on a card. What he is talking about is using it to limit the voltage on the card so its not jumping up/down constantly to get a steady clock essentially. Actually not a bad idea and I might consider "tweaking" my setup to do that actually.
|
|
|
|
Gangzsta
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 21, 2018, 01:25:18 AM Last edit: January 21, 2018, 08:35:00 PM by Gangzsta |
|
Was using EWBF averaging 2600 Sol/s with 9 cards. Switched over to dstm miner today, now averaging 2800 Sol/s.
** Update ** average is now 2900 Sol/s @ 3.37 Sol/W
Initially I received vcruntime140.dll error, downloaded and installed visual studio 2015 resolving the issue.
I've got (9) 1060 evga 3gb/6gb mix. Switching to this miner theoretically added almost another 1060 to my rig.
little boring to look at but I can live with it given the increase in Sol/s.
thank you!
|
|
|
|
zerf2004
Newbie
Offline
Activity: 24
Merit: 0
|
|
January 21, 2018, 01:57:03 AM |
|
I am struggling with my new setup. I have 3 1080ti and a 1k PSU(rosewill) If I set the power limit to anything above 200w when either ewbf or dstm miner start up the system crashes. 1000w should be plenty for 3 of those cards but it seems that the sudden surge in ask for power from all 3 psu right at the same time is to much for that PSU.
@dstm is there anyway to add a staggered start parameter? Or do you have any other ideas?
|
|
|
|
NameTaken
|
|
January 21, 2018, 02:44:00 AM |
|
I am struggling with my new setup. I have 3 1080ti and a 1k PSU(rosewill) If I set the power limit to anything above 200w when either ewbf or dstm miner start up the system crashes. 1000w should be plenty for 3 of those cards but it seems that the sudden surge in ask for power from all 3 psu right at the same time is to much for that PSU.
@dstm is there anyway to add a staggered start parameter? Or do you have any other ideas?
Startup is already staggered. https://bitcointalk.org/index.php?topic=2021765.msg21967917#msg21967917
|
|
|
|
NoOneLt
Member
Offline
Activity: 140
Merit: 10
|
|
January 21, 2018, 06:48:29 AM Last edit: January 21, 2018, 07:17:08 AM by NoOneLt |
|
@dstm //changerquest
Hi, maybe you can think of adding command button in cmd to "reload" config? Some has is working, if i change server in my bat i dont want to close and reopen miner but just "reload" config while running.
Guys, what fo you prefer, big pools with stable luck but smaller share part or smaller pools where your impacto on hashrate is bigger?
|
|
|
|
Bitsaurus
|
|
January 21, 2018, 07:16:47 AM |
|
I am struggling with my new setup. I have 3 1080ti and a 1k PSU(rosewill) If I set the power limit to anything above 200w when either ewbf or dstm miner start up the system crashes. 1000w should be plenty for 3 of those cards but it seems that the sudden surge in ask for power from all 3 psu right at the same time is to much for that PSU.
@dstm is there anyway to add a staggered start parameter? Or do you have any other ideas?
If you're certain the PSU is up to the challenge, try redoing the cabling. Sometimes rerouting the power can fix the power droops. If you have extra cables you can use for risers try using a dedicated line instead of running 2 on a line. It's rare, but sometimes even the PCIe cables can't provide enough power esp when they have 2 8-pin.
|
|
|
|
NoOneLt
Member
Offline
Activity: 140
Merit: 10
|
|
January 21, 2018, 09:05:40 AM |
|
I am struggling with my new setup. I have 3 1080ti and a 1k PSU(rosewill) If I set the power limit to anything above 200w when either ewbf or dstm miner start up the system crashes. 1000w should be plenty for 3 of those cards but it seems that the sudden surge in ask for power from all 3 psu right at the same time is to much for that PSU.
No problems here with 3x1080ti on 850PSU. Check OC, lower TDP to ~70
|
|
|
|
donpablo
Newbie
Offline
Activity: 43
Merit: 0
|
|
January 21, 2018, 10:25:32 AM |
|
what would be cool is if DEV for EWBF picked back up see how many stay here .. sorry i have issues with ass holes who are greedy...If i Understand it right dstm was gonna raise the fee sigh .... .... i guess 13 k a day wasn't enough they need more ...So that said and to make others think they won which they didn't I'm not using DSTM any more and going back to EWBF ...... I don't feel like I'm being fucked using EWBF or Using CM for that matter ... GL DSTM i hope your Greed does you in ..... Finally someone with balls ... and speaking the truth Just make your own. Aint that hard just takes time. 2018 Will make some competition on this market. If fee is too much upx Can also unpack and is your gf’s Name Ida you are good to go.! Allready done that, no fee at all :-) Just try yourself: https://www.unknowncheats.me/forum/counterstrike-global-offensive/148360-reversing-ida-walkthrough-finding-clientmode-createmove.html
|
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
January 21, 2018, 05:13:58 PM |
|
dstm, any chance to include some colors in next release? Also, sols/W would be nice. Cheers.
|
|
|
|
unique83
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 21, 2018, 06:44:14 PM |
|
what would be cool is if DEV for EWBF picked back up see how many stay here .. sorry i have issues with ass holes who are greedy...If i Understand it right dstm was gonna raise the fee sigh .... .... i guess 13 k a day wasn't enough they need more ...So that said and to make others think they won which they didn't I'm not using DSTM any more and going back to EWBF ...... I don't feel like I'm being fucked using EWBF or Using CM for that matter ... GL DSTM i hope your Greed does you in ..... Finally someone with balls ... and speaking the truth Just make your own. Aint that hard just takes time. 2018 Will make some competition on this market. If fee is too much upx Can also unpack and is your gf’s Name Ida you are good to go.! Allready done that, no fee at all :-) Just try yourself: https://www.unknowncheats.me/forum/counterstrike-global-offensive/148360-reversing-ida-walkthrough-finding-clientmode-createmove.htmlCan you explain in more detail please?
|
|
|
|
|
|