SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[inv1s1bl3]

Btw, can anyone recommend any settings, I mean config.txt and .bat file for RX580 Nitro+ Special Editions?

[1715001475]

1715001475

[1715001475]

1715001475

[doktor83]

V1.3.1
- 'gpu_conf' is now a little more advanced , added worksize and threads option, for more fine tuning
- Intensity now goes from 0-300 , because on Lite and LiteV7 some cards can go more than 200
- Changed color scheme a little bit
- Some optimisations for Hawaii cards (290, 290x, 390, 390x), set intensity to 0 and double_threads to true, or play with manual settings in the 'gpu_conf' part

Note:
You can still use the old config style for 'gpu_conf' i f you want (id, intensity, double_threads). If mixing double_threads and threads, threads will win and be accepted 

[doktor83]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

I have seen these errors when intensity was too high. Which cards are you using and which intensity?

Intensity 0 mean auto config, sometimes that setting is not good, so you have to manually try intensities, like in every other miner software...
Also just read this : https://bitcointalk.org/index.php?topic=3167363.msg32748623#msg32748623

Too many times same questions asked because people are just lazy to read.

intensity is 0 and the cards are sapphire rx 580 nitro+ 4gb .... so should i set it to like 40 or so ?

That's strange, which pool are you using? Maybe it could be a connection problem, probably the developer knows best.

[micax1]

Anyone else using this miner with R9 380 or R9 380X?

What kind of hashrate are you getting and which intensities are you using?

I haven't gotten much more than 550h/s from these cards with SRB.

mining w 280x - got 570 w intensity 26 & double threads.

[Littlegrand]

Feature Request:

Temperature stop: When any GPU reaches a certain temperature, shut down the miner.

Thanks,
--J

[micax1]

I do understand, as a temporary fix, i am starting sgminer first to put fixed fan speed on.
Any more convenient workaround would be great! even temporary. (radeon wattman/afterburner - is not a solution, as it`s not reliable and cannot be deployed/tested fast on hundred of rigs.)

I cannot use your miner directly as ~60C (def temperature fans starts spinup) is too much for lexa cards to mine 24/7.

Just found some workaround myself..

Whoever need ADL fan control after turning off adl w SRBMiner - could use:
https://github.com/BackupGGCode/overdrive5

this is quite old, on which cards and drivers is it working for you ?

im using it w rx 550, 280x, 290, 290x and rx 460.
drivers 16-17-18

it requieres some tuning definetly, as it shows all adl devices, but i think AMD kept legacy overdrive support in new cards & drivers.

[pel0v89]

does anyone get from time to time errors like this

[2018-04-09 10:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread2 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread3 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread4 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread5 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread6 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread7 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread8 hashing speed is 0 (1)
[2018-04-09 10:00:53] Warning: thread9 hashing speed is 0 (1)

or invalid job can the problem be from the pool ?
If so can u help me fix it

I have seen these errors when intensity was too high. Which cards are you using and which intensity?

I`m using http://minexmr.com what pool do you use ?

I`m using http://minexmr.com  what pool do you use ?

intensity is 0 and the cards are sapphire rx 580 nitro+ 4gb .... so should i set it to like 40 or so ?

That's strange, which pool are you using? Maybe it could be a connection problem, probably the developer knows best.

[Dark Oopa]

Just add comma

,

after "cryptonight_type" : NORMAL

and quotes too, like "normal"

Still receiving the same error  

the problem is somewhere in the last part of the config with examples. I did delete all that part.

my working config:

{
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 0,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : true,

/* Gpu target temperature, leave it on 0 if you don't want to use this option  */
"target_temperature" : 90,

/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : true,

/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part  */
"pool" : "xmr-eu1.nanopool.org:14433",

/* Address of you wallet  */
"wallet" : "mywallet",

/* Password for your wallet, probably just x  */
"password" : "x",

/* Location for devfee servers, to get better latency  */
"location" : "europe",

/* If you want to log console output, put a filename here  */
"log_file" : "log",

}

[pel0v89]

Sorry for the newb question but how exactly must i write this comand here "  FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING
%EXE% -c config.txt --adldisable
TIMEOUT /T 15 /NOBREAK  " what exactly does the %% and tasklist ....... can someone please give me an example  do i have to write a path and where to

[goran89]

Hi
Just want to say that this is the best cryptonight miner. I have rig with 3 XFX RX570 Black Edition 4GB cards (elpida memory) and 2 Sapphire RX580 Nitro+ 4GB cards(samsung memory) and i am getting around 945 per RX570 and 986 per RX580 cards.
For 570 cards I use 1200,875 for core and 2040,880 for memory.
For 580 cards I use 1200,870 for core and 2200,880 for memory amd my rig is pulling around 500W from the wall. I am getting some memory errors in HW Monitor but no incorrect shares (100% accepted).
I use overdriventool to clock my card but problem that I have is that sometimes if I restart miner, clock and voltages on my RX570 cards is reseted to default and then I need to restart my pc so overdriventool can apply clocks again. Because of this I need to keep watchdog turned of.
Now I don't know if this is a problem with miner or overdriventool?

[Bojcha]

R9 390 is alive!

[RaidoP2]

V1.3.1
- 'gpu_conf' is now a little more advanced , added worksize and threads option, for more fine tuning
- Intensity now goes from 0-300 , because on Lite and LiteV7 some cards can go more than 200
- Changed color scheme a little bit
- Some optimisations for Hawaii cards (290, 290x, 390, 390x), set intensity to 0 and double_threads to true, or play with manual settings in the 'gpu_conf' part

Note:
You can still use the old config style for 'gpu_conf' i f you want (id, intensity, double_threads). If mixing double_threads and threads, threads will win and be accepted 

Nice, will check it out after work.

Any optimization for 380 and 380x cards?

[Dzeronimo]

It would be nice if we can set GPU and MEM clock directly from config file. Can you please add that in future version?

[JuanHungLo]

I can confirm that Vega 56 works with Intensity 112 with monero7.  Gets same output as XMR-STAK.
The potential here is looking good.

[inv1s1bl3]

Mining ETN at nanopool with RX580 8GB , intensity 60 on each card 890h/s! Is there anyway I can further tweak it or that's the maximum? Do you guys have some BIOS mods for RX580 Sapphire Nitro+ Special Edition's with Micron memory for cryptonight algorithm? I am currently mining it with my ETH, which may be causing this not optimal speed.

[Krakoziabra]

Mining ETN at nanopool with RX580 8GB , intensity 60 on each card 890h/s! Is there anyway I can further tweak it or that's the maximum? Do you guys have some BIOS mods for RX580 Sapphire Nitro+ Special Edition's with Micron memory for cryptonight algorithm? I am currently mining it with my ETH, which may be causing this not optimal speed.

in the first message of this topic there is a link to a different BIOS

[cemungut]

please can you give me command line ubuntu16?i am noob 
thnks

I am also very noob gays 
just monitor it 

[betaplus]

Mining ETN at nanopool with RX580 8GB , intensity 60 on each card 890h/s! Is there anyway I can further tweak it or that's the maximum? Do you guys have some BIOS mods for RX580 Sapphire Nitro+ Special Edition's with Micron memory for cryptonight algorithm? I am currently mining it with my ETH, which may be causing this not optimal speed.

It is low, RX570 gives 890-900 H/s.

[tenmoi]

Hi all,
srbminer doesn't run. It says 'config.txt parse error'. I have doublechecked the config file, but cannot find where I am wrong.

Thank you.

start.bat is unmodified.

P.S
claymore cryptonight runs fine.

Code:

{
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 47,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : true,

/* Gpu target temperature, leave it on 0 if you don't want to use this option  */
"target_temperature" : 60,

/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : false,

/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part  */
"pool" : "xmr-asia1.nanopool.org:14444",

/* Address of you wallet  */
"wallet" : "48uBGByHY6FdkwQE73depXLvoMYADDRESSHERE",

/* Password for your wallet, probably just x  */
"password" : "x",

/* Location for devfee servers, to get better latency  */
"location" : "asia",

/* If you want to log console output, put a filename here  */
"log_file" : "",

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

*/"gpu_conf" : 
[ 
	{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
	{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
	{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
	{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]*/
}

[heavyarms1912]

Hi all,
srbminer doesn't run. It says 'config.txt parse error'. I have doublechecked the config file, but cannot find where I am wrong.

Thank you.

start.bat is unmodified.

P.S
claymore cryptonight runs fine.

Code:

{
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 47,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : true,

/* Gpu target temperature, leave it on 0 if you don't want to use this option  */
"target_temperature" : 60,

/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : false,

/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part  */
"pool" : "xmr-asia1.nanopool.org:14444",

/* Address of you wallet  */
"wallet" : "48uBGByHY6FdkwQE73depXLvoMYADDRESSHERE",

/* Password for your wallet, probably just x  */
"password" : "x",

/* Location for devfee servers, to get better latency  */
"location" : "asia",

/* If you want to log console output, put a filename here  */
"log_file" : "",

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

*/"gpu_conf" : 
[ 
	{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
	{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
	{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
	{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]*/
}

You've */ messed up in gpu_conf of your script.