rainbowminer
Jr. Member
 Offline
Activity: 95
Merit: 2
|
 |
June 22, 2019, 01:16:05 PM |
|
Hello doktor83,
what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?
Thank you for your reply in forward,
RBM
|
RainbowMiner developer https://rbminer.net
https://bitcointalk.org/index.php?topic=5050211.0
|
|
|
|
doktor83 (OP)
|
|
June 22, 2019, 06:36:32 PM |
|
Hello doktor83,
what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?
Thank you for your reply in forward,
RBM
Every thread is delayed 2 seconds. So if you have 6 gpu, every gpu is running 2 threads, that is 12 threads total so ~ 24 seconds until every gpu starts working. Except on CN/R, because of the precompilation process. Until precompilation is finished, the gpu is idling. |
|
|
|
rainbowminer
Jr. Member
Offline
Activity: 95
Merit: 2
|
|
June 22, 2019, 06:50:55 PM |
|
Hello doktor83,
what is the characteristic of the ramp-up curve, when using --enablegpurampup ? Is it linear, and, how long does it take unil it reaches the maximum?
Thank you for your reply in forward,
RBM
Every thread is delayed 2 seconds. So if you have 6 gpu, every gpu is running 2 threads, that is 12 threads total so ~ 24 seconds until every gpu starts working. Except on CN/R, because of the precompilation process. Until precompilation is finished, the gpu is idling. Super! Thank you very much for the reply. |
RainbowMiner developer https://rbminer.net
https://bitcointalk.org/index.php?topic=5050211.0
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 23, 2019, 11:11:40 AM
Last edit: June 23, 2019, 02:59:13 PM by KhorneFlake |
|
Yo, I'm back. A couple of days ago I finished mining another monero with my two 64s. I was on the 1.8.0 but had to update because I didn't mine anything afterwards. So, I'm at 1.9.0 now, and my main GPU never goes to its full potential. Always starts around 1000h/s and just drops and drops over time. Sure, that happened before If I was using anything besides the miner, but now its the case even after fresh restart, and nothing besides the miner is active. Can someone help, or if its a bug could you look at it? Edit: and now this happened https://i.imgur.com/Cldv0yT.png |
|
|
|
|
|
doktor83 (OP)
|
|
June 23, 2019, 04:15:19 PM |
|
Yo, I'm back. A couple of days ago I finished mining another monero with my two 64s. I was on the 1.8.0 but had to update because I didn't mine anything afterwards. So, I'm at 1.9.0 now, and my main GPU never goes to its full potential. Always starts around 1000h/s and just drops and drops over time. Sure, that happened before If I was using anything besides the miner, but now its the case even after fresh restart, and nothing besides the miner is active. Can someone help, or if its a bug could you look at it?
Try adding --nobinaries parameter to start.bat , maybe your cards have a problem with the built in binaries. |
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 24, 2019, 05:31:20 AM |
|
Doesn't seem to be helping, unless I did something wrong.
|
|
|
|
|
|
doktor83 (OP)
|
|
June 24, 2019, 10:22:39 AM |
|
Doesn't seem to be helping, unless I did something wrong.
Hard to tell what's causing it.. Something you could always try is to delete video drivers with DDU and then reinstall them. Also 18.6.1 are recommended. |
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 24, 2019, 01:05:38 PM |
|
I'm already using that driver, and I always DDU before installing a new one.
|
|
|
|
|
Topcd
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 25, 2019, 12:38:07 PM |
|
I'm already using that driver, and I always DDU before installing a new one.
Hey man Your temperature is badly high and is dangerous for this type of card Once i had a problem with cooling for couple of days so the temperature of my Vegas raised up to 65 degrees and more I got many errors in SRB such as BUS ID COMPUTE Error, Low Difficulty Share and etc. But with 50 and lower degrees there is not even 1 error. Try to increase FAN RPM to 3300 and more Also your overclock option is not good Send me a PM, i will give you my numbers to use with OverdriveNtool Bad overclocking causes high power usage, high temperature and will damage your cards Try to use 18.6.1 Adrenalin driver, i think its the best compatible version with SRBMINER Just try to keep them cool. Here are my results without TWEAKING https://imgur.com/a/mnYohLR |
|
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 25, 2019, 01:04:32 PM |
|
Hey, thx for the reply. I didn't OC, just undervolted, and even downclocked the core to lower the temps. Worked fine so far, till I installed the 1.9.0.
Also, it seems I cannot send you any messages. You can post here your OverdriveN settings, that's why this forum is for, anyways.
|
|
|
|
|
Topcd
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 26, 2019, 05:43:45 AM |
|
Hey, thx for the reply. I didn't OC, just undervolted, and even downclocked the core to lower the temps. Worked fine so far, till I installed the 1.9.0.
Also, it seems I cannot send you any messages. You can post here your OverdriveN settings, that's why this forum is for, anyways.
You can PM me now, It was disabled by default to receive messages from other members! What is your exact card's model? Rx Vega 64 Reference model? Because the numbers changes card by card. |
|
|
|
|
|
big_daddy
|
|
June 26, 2019, 12:49:32 PM |
|
I'm searching for a "summer algo"  a light one for my old amd rx cards what is the lighter algo to mine with SRBMiner, the one that will not overheat my cards too much? |
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
cas333
Newbie
Offline
Activity: 52
Merit: 0
|
|
June 26, 2019, 05:37:59 PM |
|
I'm searching for a "summer algo" a light one for my old amd rx cards what is the lighter algo to mine with SRBMiner, the one that will not overheat my cards too much? Best algo for summer is "switchoff rigium"  |
|
|
|
|
|
doktor83 (OP)
|
|
June 26, 2019, 07:30:46 PM |
|
I'm searching for a "summer algo" a light one for my old amd rx cards what is the lighter algo to mine with SRBMiner, the one that will not overheat my cards too much? Maybe litev7 algo in merged mining, like AEON + IRD |
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2019, 09:05:09 PM |
|
Hey, thx for the reply. I didn't OC, just undervolted, and even downclocked the core to lower the temps. Worked fine so far, till I installed the 1.9.0.
Also, it seems I cannot send you any messages. You can post here your OverdriveN settings, that's why this forum is for, anyways.
You can PM me now, It was disabled by default to receive messages from other members! What is your exact card's model? Rx Vega 64 Reference model? Because the numbers changes card by card. I'm using Asus Strixx 64s, on a Threadripper system. |
|
|
|
|
stzzzz
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 29, 2019, 06:48:12 AM |
|
dok, sometimes i get wa3ning hashing speed is 0. can parameter thread_delay increase stability. should i set it maximal or minimal?
don't want to decrease intensity as noticeable hashrate drop is seen.
|
|
|
|
|
patmontes
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 01, 2019, 02:10:54 PM |
|
I'm searching for a "summer algo" a light one for my old amd rx cards what is the lighter algo to mine with SRBMiner, the one that will not overheat my cards too much? Maybe litev7 algo in merged mining, like AEON + IRD Hi Dok, how about in these 3 choices which is lowest power consumption? How to dual mine Loki and Turtle coins with SRBMiner How to dual mine Haven and Bloc.money coins with SRBMiner How to dual mine CyprusCoin and Triton with SRBMiner |
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
July 01, 2019, 02:11:53 PM |
|
how about in these 3 choices which is lowest power consumption?
How to dual mine Loki and Turtle coins with SRBMiner
How to dual mine Haven and Bloc.money coins with SRBMiner
How to dual mine CyprusCoin and Triton with SRBMiner
use pool setting. work fine |
|
|
|
|
patmontes
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 01, 2019, 02:35:42 PM |
|
how about in these 3 choices which is lowest power consumption?
How to dual mine Loki and Turtle coins with SRBMiner
How to dual mine Haven and Bloc.money coins with SRBMiner
How to dual mine CyprusCoin and Triton with SRBMiner
use pool setting. work fine Pool setting and power consumption? |
|
|
|
|
btrot1985
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 01, 2019, 09:14:29 PM |
|
Hello all I've started using SRBMiner exclusively, mining Monero, I get flawless performance on my Vega 56 at tweak profile 9 approx. 2020 H/S for approx. 36-48 Hrs with no invalid/bad shares, somewhere between that time it starts spitting all invalid/bad shares, any recommendations or ideas as to what may be causing this. Is there a way to configure the miner to automatically restart when it does start submitting invalid shares?
|
|
|
|
|
|
