Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[qqqq]

Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  

[1714799846]

1714799846

[1714799846]

1714799846

[1714799846]

1714799846

[restless]

Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

I think the question was, if one can have different version installed, but simply copy opencl files from 15.12 into miner directory

[Claymore]

Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  

I did not check it yet. Why do you want to mine ETH solo?

[Claymore]

Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

I think the question was, if one can have different version installed, but simply copy opencl files from 15.12 into miner directory

Well, you can try, it may work. I have not tried that.

[restless]

So far I tried your miner on 2 different than  versions - 15.7 , 16.3.1 - it always works

[qqqq]

Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  

I did not check it yet. Why do you want to mine ETH solo?

Cause i don't like pools, because of stales, rejects bad ping and etc. I was mining in solo with ethminer about 2 months and it's very well. I like your solo versions of XPM miners. Just like solo)) Maybe that's an answer.  

Forgot to add ddos, steal, hack pools.

[kosaet]

so, how much must do on decred one 280x ?, i got 300-350 mh/s ?

PS. Never mine this shit decred, normal speed for one 280x is 1200 , one my friend told me (hero member, close to legendary, real my friend). Of course, this shit have fee, soo, i suggest you to stop all this
.

[xalen]

Hello. I have a question.

When I mine only ETH I got approx 20 MHs and decred near 1000 MHs (r9 380), with dual-miner I got 18+270, is that normal or I made something wrong?

[sakuleo]

test 3 riigs and 3 rigs compre this

drivers 15.2 7970 = 21.300 eth 310 dcr
drivers 16.4.1 hf = 21 780 eth 322 dcr

only eth 22.100

better hash no crashes so far (36 hs) whit new drivers.

[ariliz]

Hello. I have a question.

When I mine only ETH I got approx 20 MHs and decred near 1000 MHs (r9 380), with dual-miner I got 18+270, is that normal or I made something wrong?

and I have the same problem

[Maxikosw]

I have 2 powerfull cards on rig and 2 low end.
So if i mine ETH + DEC on one miner window with better cards i get 2% fee and low end cards own miner window 1% fee...
So 3% fee on 99mh ETH and 880mh DEC. So there is no point to mine on this miner...

[kosaet]

Guys, in crpyto world havent nothing free, i klnow more from you about this . Dont waste power for the others

[Claymore]

I have 2 powerfull cards on rig and 2 low end.
So if i mine ETH + DEC on one miner window with better cards i get 2% fee and low end cards own miner window 1% fee...
So 3% fee on 99mh ETH and 880mh DEC. So there is no point to mine on this miner...

3% fee - you have serious problems with arithmetics. Assume you have 6 cards and open 6 miner windows - will you calculate fee as 6%?
Anyway, don't use my miner if you think that you earn less with it.

[revelacaogr]

very good miner...
tnks for all your efford!

[qqqq]

After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:

Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.

[MacT]

After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:

Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.

 Hey qqqq- did you set your virtual memory to 16gb? Not doing it will cause that.

[qqqq]

After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:

Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.

 Hey qqqq- did you set your virtual memory to 16gb? Not doing it will cause that.

Yes. And i got PC where only 2GB is set for BSOD info on Win 10 and it works anyway.

And again, it mined on 14.9 recently. I just did clean uninstall with amdcleanuputility and install 15.12!  

[psk5000]

The update for 270/370 come when?

[Claymore]

v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.


Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.

[sakuleo]

how impact ethi on hash to mine eth only?