adly3000
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 02:30:39 PM |
|
I've added Nicehash Stratum to https://etc.suprnova.cc which also supports Claymore by using: ./ethdcrminer64 -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -allpools 1 -allcoins 1Let me know if you have any problems or if its working fine. Works fine with 5.1, NOT 4.5 are they calculating in ETH not ETC right? "TOTAL ETH EARNING REPORTS Last Hour 0.00006847" thats 10 minutes of work
|
|
|
|
aagert
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 330
Merit: 250
📱 Electroneum 📱 cryptocurrency
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 02:30:56 PM |
|
I feel I am being screwed by nanopool. It calculates 0.45 ETC coin per hour, yet I only got 1 ETC in 6 hours.
Is pool offline? http://etc.nanopool.org/stats https://twitter.com/nanopool_org stats are frozen, shares won't be lost. This is not pool thread, by the way.
|
|
|
|
adly3000
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 02:32:00 PM |
|
I feel I am being screwed by nanopool. It calculates 0.45 ETC coin per hour, yet I only got 1 ETC in 6 hours.
Is pool offline? http://etc.nanopool.org/statsyes they said "frozen stats but shares working"
|
|
|
|
zero1
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 02:38:16 PM |
|
doesnt open after checking the browzer (chrome/mozila) One of my cards from time to time get as hot as 80C As i want to keep all cards under 80, i use -tstop 80 But ones the card reaches 80, its stopped from miner and never returned to mining. is there a way to auto-restart it? or I should just use higher value for tstop? Or simply restart the miner from time to time (say -r 60 )
i have 4 gpu 280x and the 2 of them goes to 80 as well with dual mining eth/sc (sometimes more) with fans 100 % ofc (-tt -100).i solve the prob with extra fan hit directy on cooler (3 to 6 degree less temp). imo the r -? will not help Miner stopped suddenly (4gpu ubuntu 14.04) . My last lines on log file : 11:58:10:239 377fe700 parse packet: 242 11:58:10:239 377fe700 eth: job is the same 11:58:10:239 377fe700 new buf size: 0 11:58:11:781 5bbe0780 GPU0 t=75C fan=100%, GPU1 t=76C fan=100%, GPU2 t=70C fan=80%, GPU3 t=70C fan=80% 11:58:11:782 5bbe0780 em hbt: 0, dm hbt: 3733, fm hbt: 82, 11:58:11:782 5bbe0780 watchdog - thread 0, hb time 120 11:58:11:782 5bbe0780 watchdog - thread 1, hb time 268 11:58:11:782 5bbe0780 watchdog - thread 2, hb time 49 11:58:11:782 5bbe0780 watchdog - thread 3, hb time 198 11:58:11:782 5bbe0780 watchdog - thread 4, hb time 240 11:58:11:782 5bbe0780 watchdog - thread 5, hb time 87 11:58:11:782 5bbe0780 watchdog - thread 6, hb time 219 11:58:11:782 5bbe0780 watchdog - thread 7, hb time 74 \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\........ 1) What is the issue here ? How can i fix it ? 2) How can i restart automatically miner after a failure ? Because the default -r 0 doesn't seem to work. Help anyone ? Thanks in advance ! no1 else has that prob?? im using 5.1 ps: miner do that error after 12 to 24 hours of mining random if that helps. does any1 has a script to autostart miner after restart pc? i might try to rr pc every 10 hours.....
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 02:58:19 PM |
|
|
|
|
|
markus124
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:27:46 PM |
|
anyone can tell me if siacoin is more profitble than decred in dual mining mode? thanks
|
|
|
|
ps_jb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:30:02 PM |
|
anyone can tell me if siacoin is more profitble than decred in dual mining mode? thanks
Yes SC is more profitable than DCR
|
|
|
|
Bakery
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:30:10 PM |
|
anyone can tell me if siacoin is more profitble than decred in dual mining mode? thanks
www.whattomine.combut the answer is yes.
|
|
|
|
spyshagg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:48:19 PM |
|
me too! working great so far!
|
|
|
|
Bakery
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:56:38 PM |
|
doesnt open after checking the browzer (chrome/mozila) One of my cards from time to time get as hot as 80C As i want to keep all cards under 80, i use -tstop 80 But ones the card reaches 80, its stopped from miner and never returned to mining. is there a way to auto-restart it? or I should just use higher value for tstop? Or simply restart the miner from time to time (say -r 60 )
i have 4 gpu 280x and the 2 of them goes to 80 as well with dual mining eth/sc (sometimes more) with fans 100 % ofc (-tt -100).i solve the prob with extra fan hit directy on cooler (3 to 6 degree less temp). imo the r -? will not help Miner stopped suddenly (4gpu ubuntu 14.04) . My last lines on log file : 11:58:10:239 377fe700 parse packet: 242 11:58:10:239 377fe700 eth: job is the same 11:58:10:239 377fe700 new buf size: 0 11:58:11:781 5bbe0780 GPU0 t=75C fan=100%, GPU1 t=76C fan=100%, GPU2 t=70C fan=80%, GPU3 t=70C fan=80% 11:58:11:782 5bbe0780 em hbt: 0, dm hbt: 3733, fm hbt: 82, 11:58:11:782 5bbe0780 watchdog - thread 0, hb time 120 11:58:11:782 5bbe0780 watchdog - thread 1, hb time 268 11:58:11:782 5bbe0780 watchdog - thread 2, hb time 49 11:58:11:782 5bbe0780 watchdog - thread 3, hb time 198 11:58:11:782 5bbe0780 watchdog - thread 4, hb time 240 11:58:11:782 5bbe0780 watchdog - thread 5, hb time 87 11:58:11:782 5bbe0780 watchdog - thread 6, hb time 219 11:58:11:782 5bbe0780 watchdog - thread 7, hb time 74 \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\........ 1) What is the issue here ? How can i fix it ? 2) How can i restart automatically miner after a failure ? Because the default -r 0 doesn't seem to work. Help anyone ? Thanks in advance ! no1 else has that prob?? im using 5.1 ps: miner do that error after 12 to 24 hours of mining random if that helps. does any1 has a script to autostart miner after restart pc? i might try to rr pc every 10 hours..... Try to put your GPU clocks a bit lower, maybe that helps from haning. Google how to add program to startup and put your batch file to startup. Somehow the -r 0 (which is default) also didnt help, miner was idle for 1 hour before it restarted itself. You can put -r 1440 for miner to restart itself every 24h.(or another value)
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 03:57:19 PM |
|
me too! working great so far! What has to be changes from the EMP example to start dual mining again? Has to be one of these... -ethi 16 -mode 1 -esm 0
|
|
|
|
spyshagg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:06:20 PM |
|
me too! working great so far! What has to be changes from the EMP example to start dual mining again? Has to be one of these... -ethi 16 -mode 1 -esm 0 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool stratum.coin-miners.info:8008 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -epsw x -dpool " http://siamining.com:9980/miner/header?address=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx=worker1" -dcoin sia -dcri 42 -tt 1 -tstop -93 -ethi 8 -gser 2 -ttdcr 89 You only set "mode" option if you dont want to dual mine.
|
|
|
|
hiranyakasipu
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:16:56 PM |
|
I've been able to stop the freezing with the -mode 1-0 command. It appears that this 290x2 is flying at half-mast and that that is the real problem. It's reporting gpu0 at 8.8 Mh and gpu1 at 17 Mh, which is about half of its capabilities. The others are OK. Greetings,
I am trying to resolve a system-hanging-requiring-reboot issue, the ETH/SIA mining runs fine for a minute or so, then does the GPU hangs in OpenCL call thing. These are stock video cards with no overclocking, Claymore 5.1, Beta 2. Ubuntu 15.10. It runs fine with ethminer, and has 8Gb. I saw a previous answer to this type of problem to be add memory, but that doesn't seem to me to be the problem. The shown hash rate isn't the problem, I have adjusted the SIA intensity up and down. Thanks much in advance for any insight.
GPU #0 recognized as Radeon 280X/380X GPU #1 recognized as Radeon 280X/380X GPU #2 recognized as Radeon 390 GPU #3 recognized as Radeon 290X GPU #4 recognized as Radeon 290X
<runs good for a little while>
ETH - Total Speed: 41.449 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01 ETH: GPU0 5.401 Mh/s, GPU1 0.000 Mh/s, GPU2 13.438 Mh/s, GPU3 11.316 Mh/s, GPU4 11.294 Mh/s SC - Total Speed: 2486.920 Mh/s, Total Shares: 4, Rejected: 0 SC: GPU0 324.062 Mh/s, GPU1 0.000 Mh/s, GPU2 806.296 Mh/s, GPU3 678.943 Mh/s, GPU4 677.619 Mh/s WATCHDOG: GPU 1 hangs in OpenCL call, exit WATCHDOG: GPU 1 hangs in OpenCL call, exit
����������������������������������������������������������������ͻ � Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.1 Beta � ����������������������������������������������������������������ͼ
ETH: 1 pool is specified Main Ethereum pool is us-east1.nanopool.org:9999 SC: 1 pool is specified Main Siacoin pool is sia-us-east1.nanopool.org:9980
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:17:57 PM |
|
Did the trick!!
|
|
|
|
spyshagg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:22:33 PM |
|
I've been able to stop the freezing with the -mode 1-0 command. It appears that this 290x2 is flying at half-mast and that that is the real problem. It's reporting gpu0 at 8.8 Mh and gpu1 at 17 Mh, which is about half of its capabilities. The others are OK. Greetings,
I am trying to resolve a system-hanging-requiring-reboot issue, the ETH/SIA mining runs fine for a minute or so, then does the GPU hangs in OpenCL call thing. These are stock video cards with no overclocking, Claymore 5.1, Beta 2. Ubuntu 15.10. It runs fine with ethminer, and has 8Gb. I saw a previous answer to this type of problem to be add memory, but that doesn't seem to me to be the problem. The shown hash rate isn't the problem, I have adjusted the SIA intensity up and down. Thanks much in advance for any insight.
GPU #0 recognized as Radeon 280X/380X GPU #1 recognized as Radeon 280X/380X GPU #2 recognized as Radeon 390 GPU #3 recognized as Radeon 290X GPU #4 recognized as Radeon 290X
<runs good for a little while>
ETH - Total Speed: 41.449 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01 ETH: GPU0 5.401 Mh/s, GPU1 0.000 Mh/s, GPU2 13.438 Mh/s, GPU3 11.316 Mh/s, GPU4 11.294 Mh/s SC - Total Speed: 2486.920 Mh/s, Total Shares: 4, Rejected: 0 SC: GPU0 324.062 Mh/s, GPU1 0.000 Mh/s, GPU2 806.296 Mh/s, GPU3 678.943 Mh/s, GPU4 677.619 Mh/s WATCHDOG: GPU 1 hangs in OpenCL call, exit WATCHDOG: GPU 1 hangs in OpenCL call, exit
����������������������������������������������������������������ͻ � Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.1 Beta � ����������������������������������������������������������������ͼ
ETH: 1 pool is specified Main Ethereum pool is us-east1.nanopool.org:9999 SC: 1 pool is specified Main Siacoin pool is sia-us-east1.nanopool.org:9980
Mining Eth only that card should be doing 50mh/s stock
|
|
|
|
Spufa
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:28:32 PM |
|
My miner is running fine for some time but it just stops mining for some reason. I just close and run bat again and its fine.... anyone know what problem might be ?
|
|
|
|
Indytim
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:34:16 PM |
|
Claymore's Dual Ethereum+Decred AMD GPU Miner. ========================= Latest version v5.1: UPDATE: Beta2 - fixed issue with sending blocks in ETH solo mining. SAMPLE USAGE <snip> ethpool, ethermine (and Siacoin solo): EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://localhost:9980/miner/header -dcoin sia <snip> Can someone shed light on the siacoin solo mining arguments? Is the port always going to be 9980? What software do I need to have installed and configured, in additional to Claymore? I assume I need sia-ui? Are there any requirements for where it's installed, my environment setup, etc?
|
|
|
|
ps_jb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 04:38:03 PM |
|
Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?
|
|
|
|
zero1
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2016, 05:32:07 PM |
|
doesnt open after checking the browzer (chrome/mozila) One of my cards from time to time get as hot as 80C As i want to keep all cards under 80, i use -tstop 80 But ones the card reaches 80, its stopped from miner and never returned to mining. is there a way to auto-restart it? or I should just use higher value for tstop? Or simply restart the miner from time to time (say -r 60 )
i have 4 gpu 280x and the 2 of them goes to 80 as well with dual mining eth/sc (sometimes more) with fans 100 % ofc (-tt -100).i solve the prob with extra fan hit directy on cooler (3 to 6 degree less temp). imo the r -? will not help Miner stopped suddenly (4gpu ubuntu 14.04) . My last lines on log file : 11:58:10:239 377fe700 parse packet: 242 11:58:10:239 377fe700 eth: job is the same 11:58:10:239 377fe700 new buf size: 0 11:58:11:781 5bbe0780 GPU0 t=75C fan=100%, GPU1 t=76C fan=100%, GPU2 t=70C fan=80%, GPU3 t=70C fan=80% 11:58:11:782 5bbe0780 em hbt: 0, dm hbt: 3733, fm hbt: 82, 11:58:11:782 5bbe0780 watchdog - thread 0, hb time 120 11:58:11:782 5bbe0780 watchdog - thread 1, hb time 268 11:58:11:782 5bbe0780 watchdog - thread 2, hb time 49 11:58:11:782 5bbe0780 watchdog - thread 3, hb time 198 11:58:11:782 5bbe0780 watchdog - thread 4, hb time 240 11:58:11:782 5bbe0780 watchdog - thread 5, hb time 87 11:58:11:782 5bbe0780 watchdog - thread 6, hb time 219 11:58:11:782 5bbe0780 watchdog - thread 7, hb time 74 \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\........ 1) What is the issue here ? How can i fix it ? 2) How can i restart automatically miner after a failure ? Because the default -r 0 doesn't seem to work. Help anyone ? Thanks in advance ! no1 else has that prob?? im using 5.1 ps: miner do that error after 12 to 24 hours of mining random if that helps. does any1 has a script to autostart miner after restart pc? i might try to rr pc every 10 hours..... Try to put your GPU clocks a bit lower, maybe that helps from haning. Google how to add program to startup and put your batch file to startup. Somehow the -r 0 (which is default) also didnt help, miner was idle for 1 hour before it restarted itself. You can put -r 1440 for miner to restart itself every 24h.(or another value) the gpus are on default values ...no overclock no overvolt i try with xterm -e /path/start.bash on startup application but dont do nothing after restart i try ofc the -r flag for to many values(60.480.600), still miner crashes ty 4 answer
|
|
|
|
chup
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
![](https://bitcointalk.org/Themes/custom1/images/post/lamp.gif) |
July 26, 2016, 05:46:45 PM |
|
Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?
EthDcrMiner64.exe -mode 0 -ethi 8 -dcri 50 -esm 3 -etha 0 -dbg -1 -mport 0 -r 1 -epool etc-eu.suprnova.cc:3333 -ewal User.worker -epsw password -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=your_address&worker=your_worker" -dcoin sc -allpools 1 -allcoins -1 Profit.
|
|
|
|
|