androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 06:49:45 PM |
|
The victimof: Since people do their power calculations in different ways, to compare apples and apples, it's preferable to just report power at the wall divided by total number of cards. That's all that matters anyway for determining efficiency. By that measure, I've never seen a rig that pulls less than ~120W/card at a decent hash rate. Za1n's 714W result is impressive, well done. I find that believable, but I suspect Za1n is at the outer limit of reducing power without a substantial reduction in hashrate.
And none of this actually addresses the substantive point I made, i.e. that at a given power draw (say 1440W for a typical 110V circuit), it's more profitable to mine monero than eth.
Have you plugged your numbers into http://whattomine.com/ to see if that statement holds true ? Yes.
|
|
|
|
EthanScully
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 06:52:15 PM |
|
Nicehash has been rejecting all keccak shares since 4/11/18 7pm eastern time
|
|
|
|
thevictimofuktyranny
Legendary
Offline
Activity: 1092
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 07:57:42 PM Last edit: April 13, 2018, 08:29:49 PM by thevictimofuktyranny |
|
The victimof: Since people do their power calculations in different ways, to compare apples and apples, it's preferable to just report power at the wall divided by total number of cards. That's all that matters anyway for determining efficiency. By that measure, I've never seen a rig that pulls less than ~120W/card at a decent hash rate. Za1n's 714W result is impressive, well done. I find that believable, but I suspect Za1n is at the outer limit of reducing power without a substantial reduction in hashrate.
And none of this actually addresses the substantive point I made, i.e. that at a given power draw (say 1440W for a typical 110V circuit), it's more profitable to mine monero than eth.
Have you plugged your numbers into http://whattomine.com/ to see if that statement holds true ? You can get the power down further if you get an Intel Low Power CPU, 35watt TDP and a mobo which has better efficiency. And do remember, you can undervolt your CPU as well or lower clocks as well. Even, using one stick of DDR4, instead of 2 is around a 2.58watts saving. Harder to do on the Intel CPU platform, very easy too on AMD CPU platforms. I reckon, with that tinkering on the CPU system with a Platinum PSU, his rig would be around 660watts to 670watts. And, Za1N could choose to lower the settings from 900mv and 1125mhz on the GPUs, for more power savings. So, he could get him down to 650watts to 660watts And, that system draw divided by the number of GPUs the motherboard can support - 6-18 GPU variation currently.
|
|
|
|
Geniusvzla
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 08:15:52 PM |
|
What driver version is the most compatible with this 11.6 claymore.. Any suggestion, and anyone has to try the latest amd driver is this compatible with 11.6? how about the hashing power? Thanks guy I hope i can get some help from you..
Guy I just want to make an followup regarding of my concern about the amd driver, has anyone of you tried this latest driver to this 11.6 version of Claymore.. Thank you in advance.. I have no problems using adrenalin 18.12 with claymore 11.6. Using 580s, 570s, and a 480. Hello, Greetings from Venezuela, Everything is perfect with the Adrenalin Driver 18.3.4 and Claymore's 11.6 in my 6 GPU Sapphire Nitro + Radeon RX580 8GB GDDR5 ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Sorry my bad english
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 08:24:24 PM |
|
Which is not comparable information, he's going by AFTERBURNER reported wattage, not "at the wall" figures. Afterburner, LIKE ALL SOFTWARE, only reports the power draw of the GPU itself (NOT the entire card) because that's what the AMD Polaris cards report for power draw. Nvidia is a lot more honest about that, their cards (and utilities like nvidia-smi) report the ENTIRE CARD power draw.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 09:19:49 PM |
|
Clay-Phoenix-Ethermine-Autostarter Phoenix,Claymore Devfee no Hash Stop ,Autostart the Miner and Go Common problem with Phoenixminer and Claymore Miner is when DEVFEE comes by and the third or fourth time does not catch Shares gives these miners warning and stops the miner, to remedy this is this startbat watchdog and this ensures that the miner starts again or if necessary restart the whole miner rig, you place the contents of the start debate of the miner in this watchdog bat, and works great, you can download it at: I built a watchdog program as well that shuts down miner at set GPU temp, monitors any process you specify(the miner in this case) and auto starts it if its not there and also emails notifications etc. Gonna add min GPU temp too signifying a GPU(s) have locked. If anyone wants it I can make it available. Thought I was the only one that wanted backup to the miner itself;) --J
|
|
|
|
androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 10:52:02 PM |
|
The victimof: Since people do their power calculations in different ways, to compare apples and apples, it's preferable to just report power at the wall divided by total number of cards. That's all that matters anyway for determining efficiency. By that measure, I've never seen a rig that pulls less than ~120W/card at a decent hash rate. Za1n's 714W result is impressive, well done. I find that believable, but I suspect Za1n is at the outer limit of reducing power without a substantial reduction in hashrate.
And none of this actually addresses the substantive point I made, i.e. that at a given power draw (say 1440W for a typical 110V circuit), it's more profitable to mine monero than eth.
Have you plugged your numbers into http://whattomine.com/ to see if that statement holds true ? You can get the power down further if you get an Intel Low Power CPU, 35watt TDP and a mobo which has better efficiency. And do remember, you can undervolt your CPU as well or lower clocks as well. Even, using one stick of DDR4, instead of 2 is around a 2.58watts saving. Harder to do on the Intel CPU platform, very easy too on AMD CPU platforms. I reckon, with that tinkering on the CPU system with a Platinum PSU, his rig would be around 660watts to 670watts. And, Za1N could choose to lower the settings from 900mv and 1125mhz on the GPUs, for more power savings. So, he could get him down to 650watts to 660watts And, that system draw divided by the number of GPUs the motherboard can support - 6-18 GPU variation currently. Thanks for the info, maybe I'll look into a low power cpu, maybe that can get a rig down to 700W. 660 for a 580 rig? Any actual evidence of that?
|
|
|
|
whoismoses
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 247
Merit: 59
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 11:03:39 PM |
|
Question guys... In order to use the api and reboot the pc using .../miner_reboot
Do I have to explicitly specify the port as -mport 3333 (with no -)? Yup, I'm aware if I do this to also add a password...
|
|
|
|
thevictimofuktyranny
Legendary
Offline
Activity: 1092
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2018, 11:18:00 PM |
|
The victimof: Since people do their power calculations in different ways, to compare apples and apples, it's preferable to just report power at the wall divided by total number of cards. That's all that matters anyway for determining efficiency. By that measure, I've never seen a rig that pulls less than ~120W/card at a decent hash rate. Za1n's 714W result is impressive, well done. I find that believable, but I suspect Za1n is at the outer limit of reducing power without a substantial reduction in hashrate.
And none of this actually addresses the substantive point I made, i.e. that at a given power draw (say 1440W for a typical 110V circuit), it's more profitable to mine monero than eth.
Have you plugged your numbers into http://whattomine.com/ to see if that statement holds true ? You can get the power down further if you get an Intel Low Power CPU, 35watt TDP and a mobo which has better efficiency. And do remember, you can undervolt your CPU as well or lower clocks as well. Even, using one stick of DDR4, instead of 2 is around a 2.58watts saving. Harder to do on the Intel CPU platform, very easy too on AMD CPU platforms. I reckon, with that tinkering on the CPU system with a Platinum PSU, his rig would be around 660watts to 670watts. And, Za1N could choose to lower the settings from 900mv and 1125mhz on the GPUs, for more power savings. So, he could get him down to 650watts to 660watts And, that system draw divided by the number of GPUs the motherboard can support - 6-18 GPU variation currently. Thanks for the info, maybe I'll look into a low power cpu, maybe that can get a rig down to 700W. 660 for a 580 rig? Any actual evidence of that? Give up - you're the one who wants to mix up the CPU/RAM/MOBO/SSD into GPU power draw! NOT SOMETHING THAT ANYONE ELSE ON THIS FORUM WOULD SAY THAT MAKES ANY SENSE. 6 RX 580 Ethereum (900mv at 1125 GPU speed)rigs (including the CPU/SSD/RAM/MOBO) are using 714watts with Gold certified PSU. Platinum PSU gets you 698watts. Low power CPU gets you to 673 watts. And, 850mv and 1100GPU speed will get the watts down to 660 watts. Stop trying to make out it's difficult to do.
|
|
|
|
Cdlsports
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 01:55:42 AM |
|
Can anyone tell me what the c=xvg means in dual mining bat file for verge mining?
|
|
|
|
yorchi5m
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 04:04:34 AM |
|
Hi, I have troubles whilst mining ETH&DCR, Claymore sofware is working fine, I get all my stats on ehterminer, but I don't get anything from supernova, I made a post not long ago, some one give me a configuration code for dual mining, I run Claymore and its starts to mine, it gives me information on hashrates shares etc etc, but no balance, shares or anything on supper nova, can you help me figure out what the problem is?
|
|
|
|
skablast
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 476
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 08:45:05 AM |
|
I think that the DCR pool is reserved for Asic now. Cost of the additional energy to run DM for DCR is above what you will get in mining. DM something else
|
|
|
|
tishog
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 12:03:20 PM |
|
Hi Gents, Anyone using Claymore v11.6 on ethOS 1.3.1? Since the latest update of the miner to v11.6 I am loosing connectivity for monitoring the miner on port 3333 after 15-21 hours of mining. While Claymore keeps mining with no troubles only the monitoring is an issue. If I restart the mining process the monitoring is restored. I had no issue with the previous updates. Tried to set the port manually but the problem still exist. Anyone else experiencing this issue or has a solution? Thanks in advance.
I just confirmed this issue and uploaded a fix: "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6 - LINUX - quickfix.tar.gz" To confirm that you use updated version, find "b573" in the beginning of the log file (original v11.6 writes "b571"). This issue is related to Linux version only. Thanks. I am not sure if I would like to disturb my ethOS with custom updates as it might disturb future updates. Is there a way to restart the monitoring without restarting the miner in ethOS/Linux?
|
|
|
|
JDLSantos
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 02:28:15 PM |
|
Hi Guys,
Mine RIG setup is
6 XFX AMD R580 black edition with driver version 18.3.2 asrock H110 corsair HX1200i running windows 10 running claymore 11.5 and also tried with 11.6
and this is start.bat file
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal <wallet code>.<worker name> -epsw x -etha 0
Since 5 or 6 days ago, my rig stopped and the windows auto restart, I checked the log file, and it look like the rig crash when need to open the DAG, here a portion of the logs:
15:15:57:508 1fb4 GPU #3: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 8:0:0) 15:15:57:509 1fb4 GPU #3 recognized as Radeon RX 480/580 15:15:57:515 1fb4 GPU #4: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 9:0:0) 15:15:57:517 1fb4 GPU #4 recognized as Radeon RX 480/580 15:15:57:520 1fb4 GPU #5: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 10:0:0) 15:15:57:520 1fb4 GPU #5 recognized as Radeon RX 480/580 15:15:57:520 1fb4 POOL/SOLO version 15:15:57:521 1fb4 Platform: Windows 15:15:57:611 1fb4 start building OpenCL program for GPU 0... 15:15:57:972 1fb4 done 15:15:58:176 1fb4 start building OpenCL program for GPU 1... 15:15:58:473 1fb4 done 15:15:58:677 1fb4 start building OpenCL program for GPU 2... 15:15:59:019 1fb4 done 15:15:59:223 1fb4 start building OpenCL program for GPU 3... 15:15:59:508 1fb4 done 15:15:59:712 1fb4 start building OpenCL program for GPU 4... 15:16:00:042 1fb4 done
HERE STOPPED!
after read a lot around the forum, I added some instruction in the line command
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal <wallet code>.<worker name> -epsw x -etha 0 -gser 5 -lidag 1 -eres 0
wish it help a little bit, but still getting stop, as is showing below:
19:01:06:633 12f4 ETH - Total Speed: 77.502 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:03 19:01:06:634 12f4 ETH: GPU0 28.916 Mh/s, GPU1 28.978 Mh/s, GPU2 19.607 Mh/s 19:01:06:848 1d4c GPU0 t=76C fan=45%, GPU1 t=76C fan=54%, GPU2 t=73C fan=31% 19:01:07:382 1980 em hbt: 0, fm hbt: 31, 19:01:07:382 1980 watchdog - thread 0 (gpu0), hb time 78 19:01:07:382 1980 watchdog - thread 1 (gpu0), hb time 406 19:01:07:382 1980 watchdog - thread 2 (gpu1), hb time 78 19:01:07:382 1980 watchdog - thread 3 (gpu1), hb time 422 19:01:07:382 1980 watchdog - thread 4 (gpu2), hb time 265 19:01:07:382 1980 watchdog - thread 5 (gpu2), hb time 750 19:01:14:158 12f4 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x49af62b", "0x000000000000000000000000000000000000000000000000000000002c760feb"]}
19:01:14:345 12f4 ETH: checking pool connection... 19:01:14:345 12f4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:01:14:490 12f4 buf: {"id":6,"jsonrpc":"2.0","result":true}
19:01:14:823 12f4 buf: {"id":3,"jsonrpc":"2.0","result":["0xa0cd05c02ed59c43f310151b330ad707a3fef3f041618b1223477cc69b38ae25","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x52f432"]}
19:01:24:361 12f4 ETH: checking pool connection... 19:01:24:361 12f4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:01:24:695 12f4 buf: {"id":3,"jsonrpc":"2.0","result":["0xa0cd05c02ed59c43f310151b330ad707a3fef3f041618b1223477cc69b38ae25","0x38d7e4b9c575aa9a9da222b486ac059e7cfa04c61fb1dd58c432b72ce19ff04c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x52f432"]}
Now, I disable 4 GPUs, and the rig is working ok, with only 2 GPU, so, I would say that the problem is on the power supply, but visually inspection, looks ok.
Any ideas, of what could happen with my rig?
Thanks in advance
|
|
|
|
leonix007
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1008
Merit: 297
Grow with community
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 02:46:49 PM |
|
Can anyone tell me what the c=xvg means in dual mining bat file for verge mining?
Its a pools configuration, some pools offers different type of currency payouts, basically c=[Corresponds to your wallet type] copied this from pools "YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an <ALGO> added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins. "
|
|
|
|
whoismoses
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 247
Merit: 59
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 02:49:46 PM |
|
19:01:06:633 12f4 ETH - Total Speed: 77.502 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:03 19:01:06:634 12f4 ETH: GPU0 28.916 Mh/s, GPU1 28.978 Mh/s, GPU2 19.607 Mh/s 19:01:06:848 1d4c GPU0 t=76C fan=45%, GPU1 t=76C fan=54%, GPU2 t=73C fan=31%
76C seems a little warm for start up. What OC do you have these set to? How about undervolting? Turn the rig off, leave it off for 2 minutes. Turn it on. See if that helps. If it doesn't set the cards in question (that are not working) back to default speeds and see if that works, then OC slowly from there.
|
|
|
|
shimpa
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 02:51:18 PM |
|
It might have been answered already, or it might have not been;
On rigs with 9+ cards, how do I turn off card nr 10 and above? Even from command line when I use -di 0123456789, how to turn on or off those cards that are numbered higher than 9?
abcdef cheers thanks
|
|
|
|
JDLSantos
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 03:16:54 PM |
|
Thanks for your quick reply!
I am not sure about my OC, due to i just flash the bios, with the bios of somebody else! and the rig works for more than 7 months
I don't think that temperature is the issue, due to, the rig if working now with 2 GPU at the same temperature around 74c.
there is any way to test the power supply?, it means, it look ok, but it look that when the rig demand load, the crash occurs
thanks [/quote] 76C seems a little warm for start up. What OC do you have these set to? How about undervolting?
Turn the rig off, leave it off for 2 minutes. Turn it on. See if that helps. If it doesn't set the cards in question (that are not working) back to default speeds and see if that works, then OC slowly from there. [/quote]
|
|
|
|
androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 03:58:32 PM |
|
The victimof: Since people do their power calculations in different ways, to compare apples and apples, it's preferable to just report power at the wall divided by total number of cards. That's all that matters anyway for determining efficiency. By that measure, I've never seen a rig that pulls less than ~120W/card at a decent hash rate. Za1n's 714W result is impressive, well done. I find that believable, but I suspect Za1n is at the outer limit of reducing power without a substantial reduction in hashrate.
And none of this actually addresses the substantive point I made, i.e. that at a given power draw (say 1440W for a typical 110V circuit), it's more profitable to mine monero than eth.
Have you plugged your numbers into http://whattomine.com/ to see if that statement holds true ? You can get the power down further if you get an Intel Low Power CPU, 35watt TDP and a mobo which has better efficiency. And do remember, you can undervolt your CPU as well or lower clocks as well. Even, using one stick of DDR4, instead of 2 is around a 2.58watts saving. Harder to do on the Intel CPU platform, very easy too on AMD CPU platforms. I reckon, with that tinkering on the CPU system with a Platinum PSU, his rig would be around 660watts to 670watts. And, Za1N could choose to lower the settings from 900mv and 1125mhz on the GPUs, for more power savings. So, he could get him down to 650watts to 660watts And, that system draw divided by the number of GPUs the motherboard can support - 6-18 GPU variation currently. Thanks for the info, maybe I'll look into a low power cpu, maybe that can get a rig down to 700W. 660 for a 580 rig? Any actual evidence of that? Give up - you're the one who wants to mix up the CPU/RAM/MOBO/SSD into GPU power draw! NOT SOMETHING THAT ANYONE ELSE ON THIS FORUM WOULD SAY THAT MAKES ANY SENSE. 6 RX 580 Ethereum (900mv at 1125 GPU speed)rigs (including the CPU/SSD/RAM/MOBO) are using 714watts with Gold certified PSU. Platinum PSU gets you 698watts. Low power CPU gets you to 673 watts. And, 850mv and 1100GPU speed will get the watts down to 660 watts. Stop trying to make out it's difficult to do. I've just never seen it. Throwing out hypothetical calculations or extrapolating is all well and good, and maybe it's possible in principle. Is there evidence of a stable 6 card 580 rig hashing above 170 on eth drawing 660 at the wall? One that exists physically, not just on paper.
|
|
|
|
greatauror28
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 181
Merit: 101
Ethereum Miner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 04:16:49 PM |
|
Claymore 11.5 is much more stable with lower stale shares on dual mining ETH+XVG 8gpu RX580, win10 64 rig.
what total hash are you getting for ETH and what's for XVG? Average stale shares per hour if you may. I get 249mhs for ETH and 12465mhs for XVG. On 11.5 i get 1-2 stale share, on 11.6 i had 4-7 stales. Wow 249 Mh for 8x cards? Are these Nitro Special Editions? After 24hrs mining with 11.5, I get constant 241.5 eth and 12100 xvg with 1-2% stale shares. This is way better than 11.2 that i've been running.
|
I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.
|
|
|
|