Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[BilliGG]

Anyone has a working verge pool for someone in the US east? I tried every pool and the best I found is NL pool and I'm only getting 60% of the payout I should be getting. Unless every calculator is wrong..

I have 70 mining rigs so this is quite a big problem for me

[1715189207]

1715189207

[1715189207]

1715189207

[1715189207]

1715189207

[1715189207]

1715189207

[1715189207]

1715189207

[calvinwch]

11.6 do increase Nividia card hash little bit, nice job.

[realslik]

anyone pls help, i just have installed window 10 again, but claymore app is stop working when starting

what's error?
check eventlogs -> application logs and copy\paste error here

18:29:17:455 1630 Check and remove old log files...
18:29:17:455 1630 args: -epool asia1.ethermine.org:4444 -ewal 0x3a5d9aafc39352f968e7e177ec34237badc96d3e -epsw x
18:29:17:471 1630
18:29:17:471 1630 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
18:29:17:486 1630 º                Claymore's Dual GPU Miner - v11.6               º
18:29:17:486 1630 º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
18:29:17:596 1630 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
18:29:17:627 1630
18:29:17:627 1630 b571
18:29:17:862 1630 ETH: 1 pool is specified
18:29:17:862 1630 Main Ethereum pool is asia1.ethermine.org:4444
18:29:17:877 1630 DCR: 0 pool is specified

Dude, He says "Eventlogs" not the Claymore miner Logs

check eventlogs -> application logs and copy\paste error here

To do this

Open Windowstart--> type Event Viewer --> Windows Logs --> Applications

my mistake

Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5abe0fb3
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x1b1c
Faulting application start time: 0x01d3ca95e69fb0a2
Faulting application path: C:\Users\toto\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
Faulting module path: C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 9497195f-38a5-4a1a-81fb-d014b42913ef
Faulting package full name:
Faulting package-relative application ID:

detail:

- System

  - Provider

   [ Name]  Application Error
 
  - EventID 1000

   [ Qualifiers]  0
 
   Level 2
 
   Task 100
 
   Keywords 0x80000000000000
 
  - TimeCreated

   [ SystemTime]  2018-04-02T15:18:52.529715300Z
 
   EventRecordID 4241
 
   Channel Application
 
   Computer DESKTOP-NSP2I4V
 
   Security
 

- EventData

   EthDcrMiner64.exe
   0.0.0.0
   5abe0fb3
   igdrclneo64.dll
   0.0.0.0
   5a96b19b
   c0000005
   0000000000030819
   1b1c
   01d3ca95e69fb0a2
   C:\Users\toto\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
   C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
   9497195f-38a5-4a1a-81fb-d014b42913ef
    
    

tks all, this problem is solved after removing Intel driver

which Intel drivers did you delete? I'm getting the same error

Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5abe0fb3
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x1adc
Faulting application start time: 0x01d3d5f908532e32
Faulting application path: C:\Users\slik\Downloads\eth\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 9e7b4464-c177-442e-9c2e-b816c3cceaec
Faulting package full name:
Faulting package-relative application ID:

[ThachSanhTp]

I never mined XVG yet.
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks

[ThachSanhTp]

I found this guide but it quite confused

-o stratum+tcp://<algo>.mine.zpool.ca:<PORT> -u <WALLET_ADDRESS> [-p c=<SYMBOL>,<OPTIONS>]

<WALLET_ADDRESS> must be a valid address. Incorrect addresses will result in forfit of earning.
You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an <ALGO> added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins.
c=<SYMBOL> doesn't always work. However, if you fail to correct this and/or continue mining with the wrong currency detected you will NOT be able to change to the proper currency once an actual balance has been posted to the address. The quickest and easiest way for you to fix this, is create a new address, update your miners and make sure again you've set c= properly. Do not log a support ticket asking to convert your balance from one currency to another, they'll be closed. If you insist on keeping and using the original address. Your accrued balance will be cleared and the proper currency updated for you. Any blocks still new/immature/exchange will automaticlly convert to the new currency
See the "Pool Status" area on the right for PORT numbers.

[sickopsycho]

I never mined XVG yet.
How many XVG can we mine with: Nivida 1060 6GB, dual miner ETH+XVG?
And what is the best pool for XVG mining??
Thanks

I mine XVG using this pool... xvg.blake2s.com
The XVG is merely the icing on the cake for me, ETH is where the real money comes in.  Mined XVG only adds maybe 10% on top of the ETH I mine, but something is better than nothing.  I am also using GTX1060 3GB cards. I mine ETH at ~113MH/s and blake2 at ~1900MH/s reported running 6 of these cards.

[ermis1975]

Hello. I use Claymore with nicehash pool to mine. I want to ask which pool is better for mining ETH or ALTcoins.

[parachutesj]

using the latest version. Having 6 RX480 and 1 1070 cards.

I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.

Any ideas what is wrong?

Thx
SJ

Which amd driver version?

using 16.11.5 now. with newer versions it did not recognize all cards.

Use the blockchain driver.

https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Awsome, dude! back to stable 28.7 on each RX480 with those drivers!
Thank you very much.

[nitrobg]

Don't use those ancient blockchain drivers. Run the latest driver and simply enable compute mode by pressing Y in the latest claymore miner.

[Rulezz]

ATM what is the best pool to miner Verge ?

[vachellie]

I cannot get it to run since version 2.0 ( same for 3.0 ) ... besides the updated miner everything else is the same even the .bat files i start with which work great with 1.2. When i run it through CMD it prompts the parameters and does nothing at all leaving me with the same blinking console interface as before the start. Win7 64 , Tri-x 290 , 15.12 Crimson

[Call_Me_Bambi]

ATM what is the best pool to miner Verge ?

Verge can be mined with a variety of algorithms but if you are using Claymore's Dual Etherium miner you are restricted to Blake2s.
One recommended pool for Blake2s is https://www.zpool.ca/site/mining , but I have prefered to use Scrypt on MiningPoolHub https://verge-scrypt.miningpoolhub.com/index.php?page=gettingstarted

Verge thread.
https://bitcointalk.org/index.php?topic=1365894.0

[vachellie]

I'm testing this version at the moment and I have this little problem.

On a rig with 4 x 290x, when I start the miner it hashes with 115 Mh/s and then in a matter of seconds it drops to 107 Mh/s.
Apparently it starts with around 29 Mh/s for every card, and drops all but the one that has the monitor cable plugged in, to 26 Mh/s.
I'm using ETH only mode.

Any tips how to fix this ? 

[aserpentbaunt]

Update my 2 rigs to 11.5.
Presently surprised. Stable and I am able to run higher memory clocks with 11.5.
Vega 44mhs 1108 core and 1120 memory, rx570 now 30.6mhs 1140 core and 2080 memory, rx550 now 14mhs  1150 core 1930 memory.
All up I gained 10mhs over 2 rigs. Could push clocks higher on 550 and 570s but not worth the extra power
Best update I have seen from clamore thanks dude keep up the great work.

570s and 550s bios modded
Latetest amd drivers.

what brand of memory and videocard?
jn sapphere 550 i have max 12mh (((

[ant17]

I've been trying to find the best dcri for my 13 x RX580 rig. I currently use claymore 11.5. So I made a couple of scripts with autohotkey that do the following: take a couple screenshots every hour of the ethermine site and of the command line like if you have pressed "s", every 12 hours autodetect the best dcri like if you pressed "z" and take a screenshot. Are all these information I am collecting completely useless, or not? How would you use them? How did you find the best dcri for your cards, and how can you be sure that you have actually found it? Thanks in advance.

1. How did you find the best dcri for your cards, and how can you be sure that you have actually found it?

Start each card and use the + and - at runtime to adjust the dcri- and check the Hash rate and memory errors- once the best dcri is exceeded it will have an effect on the hash rate - now go back to the best hash rate

2. ... of the command line like if you have pressed "s
This data could be used to trigger alerts if the GPU hash rate is not as expected or has incorrect shares

Can you please post the script for your hotkey of the command line like if you have pressed "s"

1)I am not sure how you check for memory errors.... Also I am not sure that the highest reported hash rate is always the best

2) The autohotkey script is:
 ; close teamviewer
SetTimer,CheckForMsgBox,100

CheckForMsgBox:      ;Closes popup windows
   IfWinExist, ahk_class #32770
   {
      go = true
if go = true
{
sleep 1000
IfWinActive, ahk_class #32770
SetControlDelay -1
ControlClick, Button1, ahk_class #32770
}
   }

SetTimer,CheckForMsgBox,100

#CheckForMsgBox:      ;Closes popup windows
   IfWinExist, ahk_exe cmd.exe
   {
      go = true
if go = true
{
sleep 1000
WinActivate, ahk_exe cmd.exe
SetControlDelay -1
WinMaximize
sleep 1000
Send s
sleep 3000
}
   }

I've been trying to find the best dcri for my 13 x RX580 rig. I currently use claymore 11.5. So I made a couple of scripts with autohotkey that do the following: take a couple screenshots every hour of the ethermine site and of the command line like if you have pressed "s", every 12 hours autodetect the best dcri like if you pressed "z" and take a screenshot. Are all these information I am collecting completely useless, or not? How would you use them? How did you find the best dcri for your cards, and how can you be sure that you have actually found it? Thanks in advance.

Why would you use that over the autodetect of Claymore? Or are you trying to check Claymore is doing it right?

Actually I am using autodetect of Claymore, but I have it set to autodetect every 12 hours and everytime I get different values for the dcri (or maybe autodetecting all the time is the way to go?). I am trying to find the best combo and let it there.

[Rulezz]

ATM what is the best pool to miner Verge ?

Verge can be mined with a variety of algorithms but if you are using Claymore's Dual Etherium miner you are restricted to Blake2s.
One recommended pool for Blake2s is https://www.zpool.ca/site/mining , but I have prefered to use Scrypt on MiningPoolHub https://verge-scrypt.miningpoolhub.com/index.php?page=gettingstarted

Verge thread.
https://bitcointalk.org/index.php?topic=1365894.0

yes, i talk about Blake2s algo.

About 2 months ago I stopped mining Verge because many of the pools are scam or steal the hashrate, i tried unimining, antminepool and nlpool.

I'll test again to see if it pays off, at this point I'm testing the unimining

[IncludeBeer]

using the latest version. Having 6 RX480 and 1 1070 cards.

I used to mine ETH with about 28 MH/s on each card then I switched to altcoins and getting until today a stable 200 MH/s with my 7 cards (28 per card).
Now switched back to ETH and getting only 17 MH/s on my RX480 and still 28 on my 1070 now.
All cards have 8 GB memory.

Any ideas what is wrong?

Thx
SJ

Which amd driver version?

using 16.11.5 now. with newer versions it did not recognize all cards.

Use the blockchain driver.

https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Awsome, dude! back to stable 28.7 on each RX480 with those drivers!
Thank you very much.

I'm using the latest drivers but with compute mode enabled. Only getting ~24.6mh/s on each card. Thats at stock 1306mhz gpu & 1750mhz mem.

How are you getting ~29mh/s?

[Palamar]

Hi,
How to disable the dual on one of the four cards?

[Vann]

Readme!!!.txt:

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).
   For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc.

[bardacuda]

I'm using the latest drivers but with compute mode enabled. Only getting ~24.6mh/s on each card. Thats at stock 1306mhz gpu & 1750mhz mem.

How are you getting ~29mh/s?

You need to mod the VBIOS with different memory timings and also overclock the memory. You can downclock and undervolt the core to save power as well.
Generally speaking the memory can go to 2000 - 2200 MHz depending on which ICs are used and their quality. Core can be downclocked to around 1150 MHz and undervolted to 800 - 950mV without losing hash rate. You will have to do stability testing to figure out optimal settings for your cards as each one is different.

You can use this version of PBE to do an easy timings mod:
https://github.com/jaschaknack/PolarisBiosEditor

Back up your original and flash the modded one with atiflash:
https://www.techpowerup.com/download/ati-atiflash/

You may need to disable the driver's VBIOS signature check after modding. Use this tool:
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher