[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

Site down?

Nope, its working ok

If someone want to use DAGFIX version
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
Still yes there are problems with too many GPUs. And there is nothing i can do about it.
We still need to wait for AMD to release normal linux driver with this fix so i could install it to normal version of image.
For now this is only solution for linux.

[1715219718]

1715219718

[1715219718]

1715219718

[1715219718]

1715219718

[1715219718]

1715219718

[1715219718]

1715219718

[marimach77]

Site down?

Nope, its working ok

If someone want to use DAGFIX version
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
Still yes there are problems with too many GPUs. And there is nothing i can do about it.
We still need to wait for AMD to release normal linux driver with this fix so i could install it to normal version of image.
For now this is only solution for linux.

@tytanic
- my rig (4x RX580) was working FINE with simpleminer-RX-v1118-kernel4.11-16.60-noaer.img BUT same rig with simpleminer-RX-v1118_dagfix_computekernel.img does not work.
SEE SCREEN SHOT.

[swolepoindexter]

Must just be from Australia, has been down for a few hours now.  Tried my home internet connection and mobile through another provider.

http://imgur.com/a/3V743

[Jay-NZ]

I am also having issues accessing the dash today for at least the last 5 hours, sometimes cannot be reached, sometimes loads... but then when it loads it shows 2 of my mining rigs as off and another showing as off intermittently... but all reporting fine at the mining pool and also plugged in a monitor to each one to confirm. Also cannot get to the Chat. I'm in New Zealand.

[swolepoindexter]

I can access the dash using a VPN in ireland through Private Internet Access, but of course I cannot manage my rig as it's not registered with the site.

Someone has buggered up our routing  

Edit:  Must be an issue with Cloudfare or the NZ Vocus handoff to the USA.

Tracing route to www.simplemining.net [104.23.241.254]
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  RT-AC5300-1570 [192.168.2.1]
  2    14 ms    12 ms    15 ms  dsldevice.gateway [192.168.1.100]
  3     *        *        *     Request timed out.
  4    15 ms    15 ms    14 ms  144.130.220.209
  5    15 ms    15 ms    14 ms  bundle-ether2.bth-edge901.hobart.telstra.net [203.50.11.170]
  6    19 ms    18 ms    17 ms  bundle-ether5.bth-core1.hobart.telstra.net [203.50.11.167]
  7    27 ms    26 ms    27 ms  bundle-ether7.exi-core10.melbourne.telstra.net [203.50.11.20]
  8    27 ms    26 ms    26 ms  bundle-ether1.lon-edge902.melbourne.telstra.net [203.50.11.112]
  9    27 ms    27 ms    26 ms  voc1255684.lnk.telstra.net [139.130.110.30]
 10    62 ms    62 ms    62 ms  bundle-150.cor02.mel11.vic.vocus.net.au [114.31.196.56]
 11    62 ms    63 ms    62 ms  bundle-104.cor03.syd03.nsw.vocus.net.au [114.31.192.60]
 12    63 ms    62 ms    63 ms  ten-0-2-0-2.cor01.alb01.akl.vocus.net.nz [114.31.202.84]
 13    63 ms    62 ms    62 ms  ten-2-2-0.bdr01.akl05.akl.VOCUS.net.nz [114.31.202.43]
 14    62 ms    62 ms    63 ms  as13335.cust.bdr01.akl05.akl.VOCUS.net.nz [175.45.93.218]
 15    62 ms    50 ms    50 ms  104.23.241.254

Trace complete.

[tytanick]

UPDATE v1120
- added claymore-zec-v12.6
- added xmr-stak-amd
- optimization for faster dashboard response


P.S - i received some reports that Australia has problems accessing dashboard.
I already sent support ticket to cloudflare to check it out.

[dartec]

Is anyone else having problems with the ccminer miners?

When I try using either ccminer-skunk-krnlx or ccminer-tpruvot, I get the following message:

/root/xminer/sh: line 49: 11860 llegal instruction      $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

It does try and restart but comes back with the same message and is in an endless loop.

Any suggestions?

This is the command I have in for ccminer-skunk-krnlx:
-a skunk -o stratum+tcp://yiimp.ccminer.org:8434 -u BAushxUbDYNPj7RbhuPMf3cCBKaEWPsgb5 -p donate

Thank you.

@tytanick : any ideas?

[tytanick]

@tytanick : any ideas?

Need to answer all emails then i will look into it.
I have too much work overdue right now.
Been feeling not so good last 1-2 weeks so my efficiency was fucked

[marimach77]

@tytanick : any ideas?

Need to answer all emails then i will look into it.
I have too much work overdue right now.
Been feeling not so good last 1-2 weeks so my efficiency was fucked

Kindly please do not forget about this:

simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580

I can only confirm above. simpleminer-RX-v1118_dagfix_computekernel.img.zip does not work with my rig (RX580 and AsRock H110 Pro BTC+). SEE SCREEN SHOT. It was working fine on simpleminer-RX-v1118-kernel4.11-16.60-noaer.img

[Lukke]

Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.

[fabiojnd]

@tytanick
Any information for smos xmr nanopool? Thank you.

[tytanick]

Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.

It supports only 580.
For vega support i will make soon new image with new drivers.

H110
Kindly please do not forget about this:

Cant do anything about this one.
The kernel is what it is and some motherboards have problem.
I heard that plugging 8GB RAM solve problem, can you check it ?
Anyway i need fixed driver from amd to make it work on all motherboards
Still no driver, only this strange kernel fix.

[Deathwing]

I am pretty sure it might have been asked before but I am just going to say it again, is it possible to somewhat implement Nicehash's miner (algo switching with various different algos) into Simple Mining? Also the boot time seemed kinda long. Longer than a clean install of Windows 10, same SSD. Don't know if I did anything wrong.

[marimach77]

Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.

It supports only 580.
For vega support i will make soon new image with new drivers.

H110
Kindly please do not forget about this:

Cant do anything about this one.
The kernel is what it is and some motherboards have problem.
I heard that plugging 8GB RAM solve problem, can you check it ?
Anyway i need fixed driver from amd to make it work on all motherboards
Still no driver, only this strange kernel fix.

@tytanick, currently I have 2x 4GB (8GB) DDR4 installed. Seems I have to back to simpleminer-RX-v1118-kernel4.11-16.60-noaer.img

[kamilmining]

Site down?

Nope, its working ok

If someone want to use DAGFIX version
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
Still yes there are problems with too many GPUs. And there is nothing i can do about it.
We still need to wait for AMD to release normal linux driver with this fix so i could install it to normal version of image.
For now this is only solution for linux.

@tytanic
- my rig (4x RX580) was working FINE with simpleminer-RX-v1118-kernel4.11-16.60-noae[Suspicious link removed]g BUT same rig with simpleminer-RX-v1118_dagfix_computekernel.img does not work.
SEE SCREEN SHOT.

I have the same problem

[Lukke]

It supports only 580.
For vega support i will make soon new image with new drivers.

And overclocking is possible?

[yatta]

I'm getting such error on H110 Pro BTC
acpi error ae_not_found _SB_.PCI0.XHC_.RHUB.HS11
But only on NV version. On AMD it is ok.
Also on NV version miner and overclock does not apply on start.

[stef_stef]

What is going on with the block chain drivers and SMOS? What is the current reported hash rate for AMD 470/80?

I am building a few rigs and want to give SMOS a try, but not if I am loosing hash power.

Thanks

[tpd09]

may I check - how can I flash an image onto an SSD drive? the etcher does not see my SSD drive

[jackbox]

may I check - how can I flash an image onto an SSD drive? the etcher does not see my SSD drive

In options you have to select "Unsafe" mode. You have to be extra careful as you can write to any drive including your boot drive.