Swedish ASIC miner company kncminer.com

[Searing]

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

[Phoenix1969]

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

12volt exhaust fan straight above venting roof. Powered by a psu. hehe
It is inside a closet, in a garage in maui where its 90F outside and baking cooking hot in that garage. At least 100 degrees(F) ambient room temp at the hottest part of the day. I couldn't stand to be near them too long. 10 cubes in that little closet is really too much on top of having two xantrax 6000 controller chargers running in the same little closet. But I'm the "Hot hashing Pioneer"...remember hahaha..  hope it all doesnt burst into flames, its probably drying out the wood shelving really well. perfect kindeling. It looks like all the corsairs came with 16awg wire, and all the pci connections are fine. Some of the ax1200 psu's, although identical, would not survive startup, leaving dead cubes or dies while others were fine. (2 cubes each) I ended up using the old cx600's on 2 cubes(1 each) Those work great. I used a cx850 for a cube and controller combo as well, also great. All Asic temps look to be fine, around 60-65C All the Vrm's are 90-95C

[crashoveride54902]

2 neppies averaging just over 7Th/s combined, so about 3.5Th/s a piece at Eligius pool.
Totally unopened cubes, stock wires, stock settings, FW 1.0

er NO A/C either right?

Searing

12volt exhaust fan straight above venting roof. Powered by a psu. hehe
It is inside a closet, in a garage in maui where its 90F outside and baking cooking hot in that garage. At least 100 degrees(F) ambient room temp at the hottest part of the day. I couldn't stand to be near them too long. 10 cubes in that little closet is really too much on top of having two xantrax 6000 controller chargers running in the same little closet. But I'm the "Hot hashing Pioneer"...remember hahaha..  hope it all doesnt burst into flames, its probably drying out the wood shelving really well. perfect kindeling. It looks like all the corsairs came with 16awg wire, and all the pci connections are fine. Some of the ax1200 psu's, although identical, would not survive startup, while others were fine. (2 cubes each) I ended up using the old cx600's on 2 cubes(1 each) Those work great. I used a cx850 for a cube and controller combo as well, also great.

holy hot hell furnace ya got there...you should put a web cam on just in case it does go so you can watch it go up

[Phoenix1969]

one interesting tidbit...  My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone!  lol. He can flash firmware, reboot, all of it right from his iphone.

[crashoveride54902]

one interesting tidbit...  My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone!  lol. He can flash firmware, reboot, all of it right from his iphone.

ya not that hard with teamviewer...i use the same thing course i don't have a fancy neppy and really don't need it for the jups since they are highly stable...almost shockingly stable coming from knc :O

[DumDumz]

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing  is not reverent. Wow, thing of it maybe I should move to Sweden..

[Phoenix1969]

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing  is not reverent. Wow, thing of it maybe I should move to Sweden..

What are you referring to? News about what? Taking action on what?
 Batch one is hashing away as far as I know... our batch ones came on wednesday
Batch zero 2 weeks ago

[Searing]

if we do not have any Substantial Concrete news by this month end .. to proof they are taking action practically and not just talk and talk..and talk ..this project of theirs may not materialize at all and maybe the op could just closed this thread and not waste our time and hope on them. How on earth they are going to succeed if they only work 8 hours a day and 5 days a week? while the competitor overseas is working 24 hours a day by shifts and 7 days a week. To them maybe speed and timing  is not reverent. Wow, thing of it maybe I should move to Sweden..

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

leisurely works

Searing

[Beans]

one interesting tidbit...  My brother was able to sign into his Imac at home in maui from about 4000 miles away to access the Neppies web GUI through remote desktop.... using his iphone!  lol. He can flash firmware, reboot, all of it right from his iphone.

ya not that hard with teamviewer...i use the same thing course i don't have a fancy neppy and really don't need it for the jups since they are highly stable...almost shockingly stable coming from knc :O

My jups are overclocked and it's 106 degrees in the room. They don't miss a beat.

[user27]

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

[Phoenix1969]

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

[IMG]

i think a die is coming on and off. you look to be getting 3.35 which is pretty good. you could try the advanced tab on the gui to identify which one it is, and adjust the voltage till it runs okay. I dont know which way to tell you to go, probably up.
If you have another PSU handy, try that. some deliver better than others

[Old_Dominion]

people any help?
is show me this errors everytime
never stop
this is normal?

Same shit, different Neptune:

I snipped out the images to avoid it being a giant post.  I saw this at the console about 15 minutes after I flashed the 1.0 firmware. It suddenly started spamming the communications failure messages. I reset the miner to defaults and power cycled it (switched power supplies on and off), set my clocks back up to 500Mhz, and I have not gotten a repeat.

My experience so far with 1.0 has not been a performance improvement so much as lower variance in hash rate (so RMS hash rate is slightly higher at the pool - 3.55Th/s). I continue to run at 500Mhz on all cores without having to make voltage changes.  Hottest VRM hits about 96C, the room is around 22C.

I see The Avenger still has sand in his mangina.  What kind of a loser has this much time to troll forums?

[s1gs3gv]

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

6 hour work days coming for the Swedes
http://www.entrepreneur.com/article/235283

[Phoenix1969]

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

6 hour work days coming for the Swedes
http://www.entrepreneur.com/article/235283

Not "our" swedes, that is only in Gothenburg.
Id be more worried about "Swedish Industrial vacation", which takes all of July

[Ski72]

they can be leisurely ...they have the datahall all of our $$ no refund..why drive difficulty up by going 24/7 and pay OT etc when it would not benefit their datahall in any way

6 hour work days coming for the Swedes
http://www.entrepreneur.com/article/235283

Not "our" swedes, that is only in Gothenburg.
Id be more worried about "Swedish Industrial vacation", which takes all of July

yup, exactly why my (Swede) wife is heading there w/ the kids on Wednesday ... to visit all her friends and family - who are not at work!   

[user27]

Serial cable problem solved; made some double length ones.

I swapped out two of the ridiculously short KfC cables and the whole cable layout is much more comfortable now. I have the parts to make another dozen if anybody needs them in the UK.

Comparison:


Action shot:

[Ski72]

Serial cable problem solved; made some double length ones.

I swapped out two of the ridiculously short KfC cables and the whole cable layout is much more comfortable now. I have the parts to make another dozen if anybody needs them in the UK.

*snip*

very nice ... I've got the same thing going for my Jupiters (waiting for the Neptunes) likewise have the materials for more, here in the US ... 

but your's have better "cool" factor due to their color ... mine are the stock grey/blue stripe 

[The Avenger]

Very unhappy kfc customer taking small steps to action. Good for him.

I hope kfc realise the human suffering they are causing while they fill their own pockets
http://www.ripoffreport.com/r/KnCMiner/internet/KnCMiner-Birger-Jarlsgatan-33-5tr111-45-Stockholm-SwedenOrg-number-55691-9725-Sweden-b-1161752

[faetos]

Very unhappy kfc customer taking small steps to action. Good for him.

I hope kfc realise the human suffering they are causing while they fill their own pockets
http://www.ripoffreport.com/r/KnCMiner/internet/KnCMiner-Birger-Jarlsgatan-33-5tr111-45-Stockholm-SwedenOrg-number-55691-9725-Sweden-b-1161752

How'd your donkey like the New Dominion carrot? I bet it got tired of all those KfC carrots.

[RickJamesBTC]

Very unhappy kfc customer taking small steps to action. Good for him.

I hope kfc realise the human suffering they are causing while they fill their own pockets
http://www.ripoffreport.com/r/KnCMiner/internet/KnCMiner-Birger-Jarlsgatan-33-5tr111-45-Stockholm-SwedenOrg-number-55691-9725-Sweden-b-1161752

Dude, get over it. You HAVE to have something better to do. If you don't, GO FIND SOMETHING BETTER TO DO.

Your life is going to keep being shit if you don't stop bitching every day about something like this. You aren't even funny anymore, which was the only reason anyone bothered to not ignore you in the past. Now it is just pathetic.