Official Thread: AMT

[FrictionlessCoin]

some lawyer should set up a business in the btc recovery area nicw little.niche there

Maybe we can hire that 'Merry Miner' dude to serve as a Debt Collector.

[1715188516]

1715188516

[1715188516]

1715188516

[1715188516]

1715188516

[1715188516]

1715188516

[YourPalToots]

If i were to receive another rig from AMT, FIRST thing i would do is remove it from it's case, BEFORE i turn it on.  The cases and configurations they are using are nothing but a waste of space and add extra cost.  just do the antminer thing, and ship without a case.  who cares what it looks like if it works.

See now that's a good idea. It would speed up assembly/shipping and it's basically what we did with the first units shipped out so far.

But that miner would basically be like our testing station #3.  

Cage with fans mounted on the back, modules, mainboard and backplane, raspi and cables.  If anyone is up for that we're down to draft a quick agreement/form that states you as a client prefer to receive your miner in a disassembled and don't wish for the case assembly service.

Who's up for that?

I'm up for that.

[sirminesalot]

some lawyer should set up a business in the btc recovery area nicw little.niche there

Maybe we can hire that 'Merry Miner' dude to serve as a Debt Collector.

Maybe we can hire ROCKY BALBOA to be the debt collector. When the debt continues to go unpaid, ROCKY beats the shit out of him.

Remember, Rocky started out as a debt collector before he started fighting  

[timmyd]

some lawyer should set up a business in the btc recovery area nicw little.niche there

Maybe we can hire that 'Merry Miner' dude to serve as a Debt Collector.

Maybe we can hire ROCKY BALBOA to be the debt collector. When the debt continues to go unpaid, ROCKY beats the shit out of him.

Remember, Rocky started out as a debt collector before he started fighting  

Good film but i think stalone is knocking on abit now.

[timmyd]

You will need this email then i guess. good luck. please respond if you have success

sales@advancedminers.com

[opieum2]

If i were to receive another rig from AMT, FIRST thing i would do is remove it from it's case, BEFORE i turn it on.  The cases and configurations they are using are nothing but a waste of space and add extra cost.  just do the antminer thing, and ship without a case.  who cares what it looks like if it works.

See now that's a good idea. It would speed up assembly/shipping and it's basically what we did with the first units shipped out so far.

But that miner would basically be like our testing station #3.  

Cage with fans mounted on the back, modules, mainboard and backplane, raspi and cables.  If anyone is up for that we're down to draft a quick agreement/form that states you as a client prefer to receive your miner in a disassembled and don't wish for the case assembly service.

Who's up for that?

I would be perfectly fine with that setup. I would have done away with the case anyway.

@AMT if you are offering this as a way to get us to get the hardware quicker than sure I am up for it. Message me the details. I would be more than happy to check it out. My primary gripe with the setup was airflow anyway so this logically makes sense. What about the LED display? is that part of the disassembled unit too?

[FrictionlessCoin]

I am very concerned what is being offered here is not a 1.2 Th/s miner, but just a very expensive overclocked 1Th/s miner. I am asking for a refund.

A lot of folks have tried to do that already.   Time to consult a lawyer.  Ask clennel for one.

[FrictionlessCoin]

6 cases.

Very reassuring.

Any other photos?

Today we'll make some special pics for you.

Still waiting for those pics.

[YourPalToots]

I am very concerned what is being offered here is not a 1.2 Th/s miner, but just a very expensive overclocked 1Th/s miner. I am asking for a refund.

A lot of folks have tried to do that already.   Time to consult a lawyer.  Ask clennel for one.

I've emailed his lawyer. Same response as AMT.

None.

[regtable69]

If i were to receive another rig from AMT, FIRST thing i would do is remove it from it's case, BEFORE i turn it on.  The cases and configurations they are using are nothing but a waste of space and add extra cost.  just do the antminer thing, and ship without a case.  who cares what it looks like if it works.

See now that's a good idea. It would speed up assembly/shipping and it's basically what we did with the first units shipped out so far.

But that miner would basically be like our testing station #3.  

Cage with fans mounted on the back, modules, mainboard and backplane, raspi and cables.  If anyone is up for that we're down to draft a quick agreement/form that states you as a client prefer to receive your miner in a disassembled and don't wish for the case assembly service.

Who's up for that?

im up for that and i dont ming setting things up in a gpu style rig to keep things cool but there has to be more of an incentive than you will have it shipped tomorrow i shall p.m you with my proposal and if were in agreeance then happy all round but i will need great instructions on how to actually run this so if you could p.m or set me up a log in for the back end support from your page that would be awesome.

[NotFuzzyWarm]

If i were to receive another rig from AMT, FIRST thing i would do is remove it from it's case, BEFORE i turn it on.  The cases and configurations they are using are nothing but a waste of space and add extra cost.  just do the antminer thing, and ship without a case.  who cares what it looks like if it works.

See now that's a good idea. It would speed up assembly/shipping and it's basically what we did with the first units shipped out so far.

But that miner would basically be like our testing station #3.  

Cage with fans mounted on the back, modules, mainboard and backplane, raspi and cables.  If anyone is up for that we're down to draft a quick agreement/form that states you as a client prefer to receive your miner in a disassembled and don't wish for the case assembly service.

Who's up for that?

I am for my 520 unit which is rather far down the line @ order 1565... I think my Ants look fine caseless.

[AMT_miners]

Just a heads up, we're running a bit late in assembly. We're leaving the facility now and headed towards the office to meet Phin, its about an hour depending on traffic. We PM'd Phin earlier saying that we'll be there between 6:30-7, apologies, just running late.

[mdiggy]

Just a heads up, we're running a bit late in assembly. We're leaving the facility now and headed towards the office to meet Phin, its about an hour depending on traffic. We PM'd Phin earlier saying that we'll be there between 6:30-7, apologies, just running late.

I, too, got stuck in traffic, thinking I would get here a half hour early. Finally, got off 476, then opted to turned the wrong way, for I thought I saw a goat. 

Now, at Saxby's, and have already replied to AMT, of which I see they are online now.

Look forward to meeting them.

~Bruno Kucinskas

Good luck Bruno. Update us ASAP. Looking forward to hearing from you.

[RickJamesBTC]

Bye bye bruno  

I'll miss your posts.


I can't believe people are considering another delay tactic and reduction in what you receive from them. I said months ago to file complaints with the appropriate agencies, to file an actual case in small claims court, but who bothered to do it? Now it is APRIL and you have nothing, just more delays.

Skip the "case assembly service" ?? You mean building the damn things? What a joke.

[Phinnaeus Gage]

Bitcointalk was acting sluggish, but seems to be up to snuff now. I did receive another courtesy PM from them expressing an apology for running late due to working late at their assembly facility. They should be here momentarily, thus nothing yet, but good news nonetheless, for they're communicating and seem to be busting their balls to satisfy outstanding orders.

~Bruno Kucinskas

[RickJamesBTC]

I'm annoyed you aren't at the assembly facility. That is the only place that matters. Going to an office to get abducted doesn't achieve anything. If you are going down, at least go down swingin!

[NotFuzzyWarm]

Hmm. even folks on the BitMine.ch thread are talking about some getting units. Faboo!
https://bitcointalk.org/index.php?topic=291141.msg5938275#msg5938275
Now as long as that light at the end of this tunnel isn't another train...

[opieum2]

Regardless I for one am glad he did this. Its a big deal at least to get things moving again. Doesnt totally change what has happened thus far, but if we start to get our miners then thats all that counts. I personally can live without a case. But seeing as I paid for it, wouldn't hurt to get the parts and assemble it myself if I have to. All I want is to know the miner works before I walk out of there with the hardware.

[rik_khaos]

Some one earlier asked what my order number was. It's 1432.

If I were to take the option of not having my miner assembled, as long as the boards were tested, I would want some sort of compensation as my order did indeed include assembly. I really like the idea of receiving the two backplanes and six boards. I'd want two cages to mount the boards in, I've already priced milk crates for their added open air. My wife doesn't like the idea of a milk crate sitting there so I told her she can paint the outside to match the rest of the room.

I'd love to have the extra space with the 3 boards per backplane. I'd would love to have a liquid cooling system with copper pipe coiled along the heat sink like my old refrigerator. ;-)

Could a system with the two backplanes be run with the one pi and a USB hub?

If five boards run at 1th nominal then 6 boards would be the 1.2 nominal then I should get a little more out of it in turbo mode.

[Casiriahmine]

Did Phin meet with them?

~casey