awarywocki
Newbie
Offline
Activity: 8
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 04:50:54 PM |
|
Phoenix miner works another way than Claymore's. It use optimized kernels wich is must be calculated with depends of DAG epoch. This is why if miner didn't contains optimized kernels for some DAG it would give error.
Claymore's miner didn't use kernels optimized for each epoch. So it must work on any DAG. You must provide your config, bat file and log to determine what's your problem.
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines) [config.txt] #-epool europe.ethash-hub.miningpoolhub.com:20555 (<-- ETC port, do not work) -epool europe.ethash-hub.miningpoolhub.com:20535 (<-- ETH port, works well) -ewal {private, deleted} -eworker {private, deleted} -epsw x -esm 2 -allcoins 1 -allpools 1 -tt 72 -ttdcr 75 -ttli 78 -tstop 82 -fanmin 30 -mport -3333 -ethi 16 -dcri 14 -rxboost 1 -strap 777000000000000022AA1C00315A5B36A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715 #OC #core -cclock 1100 -cvddc 825 #memory -mclock 2050 -mvddc 825 [/config.txt] [start.bat] timeout /t 60 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe [/start.bat] I can paste log too, bu there is strictly NOTHING because miner hangs (sometime with restart, sometime not). It hangs after "setting dag epoch 280" line and before "setting dag epoch 280 done". I tried older version of claymore. It stops hanging but it just creating dag epoch and never finish. Changing port on pool to mining ETH solves the problem... for now
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 05:56:16 PM |
|
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)
Try "-eres 0".
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 06:22:47 PM |
|
I can paste log too, bu there is strictly NOTHING because miner hangs (sometime with restart, sometime not). It hangs after "setting dag epoch 280" line and before "setting dag epoch 280 done". I tried older version of claymore. It stops hanging but it just creating dag epoch and never finish. Changing port on pool to mining ETH solves the problem... for now
Looks like it's not enough memory to set DAG #280... Do you have enough virtual memory (page file) size? And another one thing. You use -allcoins 1. This is what Claymore writes in readme: -allcoins Specify "-allcoins 1" to be able to mine Ethereum forks, in this mode miner will use some default pools for devfee Ethereum mining. Note that if devfee mining pools will stop, entire mining will be stopped too. Miner has to use two DAGs in this mode - one for Ethereum and one for Ethereum fork, it can cause crashes because DAGs have different sizes. Therefore for this mode it is recommended to specify current Ethereum epoch (or a bit larger value), for example, "-allcoins 47" means that miner will expect DAG size for epoch #47 and will allocate appropriate GPU buffer at starting, instead of reallocating bigger GPU buffer (may crash) when it starts devfee mining. Another option is to specify "-allcoins -1", in this mode miner will start devfee round immediately after start and therefore will get current epoch for Ethereum, after that it will be able to mine Ethereum fork. If you mine ETC on some pool that does not accept wallet address but requires Username.Worker instead, the best way is to specify "-allcoins etc", in this mode devfee mining will be on ETC pools and DAG won't be recreated at all.Try to set "-allcoins etc"
|
|
|
|
awarywocki
Newbie
Offline
Activity: 8
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 07:51:35 PM |
|
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)
Try "-eres 0". hoooooly ff**. You are right! I've checked my config line by line and found that there were "-eres 20" option between my #comment lines at the very bottom of the file. I was sure, that at the bottom are only #comments lines with my tests, thoughts etc (mean et cetera, not ethereum classic ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) ) so I did not paste them. After deleting "-eres 20" my miners can mine ETC again (AFAIR eres=2 by default). So it means miner tried to work with DAG epoch 280 + 20 = 300, and that is why it crashed THANK YOU! Looks like it's not enough memory to set DAG #280... Do you have enough virtual memory (page file) size?
And another one thing. You use -allcoins 1. This is what Claymore writes in readme:
-allcoins Specify "-allcoins 1" to be able to mine Ethereum forks, in this mode miner will use some default pools for devfee Ethereum mining. Note that if devfee mining pools will stop, entire mining will be stopped too. Miner has to use two DAGs in this mode - one for Ethereum and one for Ethereum fork, it can cause crashes because DAGs have different sizes. Therefore for this mode it is recommended to specify current Ethereum epoch (or a bit larger value), for example, "-allcoins 47" means that miner will expect DAG size for epoch #47 and will allocate appropriate GPU buffer at starting, instead of reallocating bigger GPU buffer (may crash) when it starts devfee mining. Another option is to specify "-allcoins -1", in this mode miner will start devfee round immediately after start and therefore will get current epoch for Ethereum, after that it will be able to mine Ethereum fork. If you mine ETC on some pool that does not accept wallet address but requires Username.Worker instead, the best way is to specify "-allcoins etc", in this mode devfee mining will be on ETC pools and DAG won't be recreated at all.
Try to set "-allcoins etc"
thanx for response. I tried increase virtual memory before (set it even to 45000MB) and this did not help. "-allcoins etc" could be solution but miner did not stay alive long enough to change dag epoch because of devfee, so probably this wouldn't help. Anyway Claymore hit the bull's eye ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 07:57:32 PM |
|
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)
Try "-eres 0". miner dont work/ test on 8 gb card EthDcrMiner64.exe -allcoins 1 -eres 0 -mode 1 -asm 2 -esm 3 -rxboost 1 epool POOL: stratum+tcp://daggerhashimoto.eu.nicehash.com:3353, WALLET: xxx.RIG01, PSW: x, ALLPOOLS: 1 then switch to etc mining DAG 281 have error pnoenixminer work fine test on lot of rigs with different card 4\8 gb same error 14.6 14.7 same error driver 18.6.1 19.7.2 same error plz fixminer add test directly on etc pool. same error
|
|
|
|
sharmanov
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 22, 2019, 10:09:28 PM |
|
does anyone know what error 1002 means? I'm getting GPU #0 strap "1" failed, error 1002 how do I fix that and what does that error mean? all straps get that error Using Radeon VII
The straps do not work on Radeon Vii thats why you're getting that error, its not supported. You should try running the intensity tricks on the miner vs straps. Intensity trick? could you please specify if it's not too much to ask 🙏
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 05:07:27 AM |
|
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)
Try "-eres 0". miner dont work/ test on 8 gb card EthDcrMiner64.exe -allcoins 1 -eres 0 -mode 1 -asm 2 -esm 3 -rxboost 1 epool POOL: stratum+tcp://daggerhashimoto.eu.nicehash.com:3353, WALLET: xxx.RIG01, PSW: x, ALLPOOLS: 1 then switch to etc mining DAG 281 have error pnoenixminer work fine test on lot of rigs with different card 4\8 gb same error 14.6 14.7 same error driver 18.6.1 19.7.2 same error plz fixminer add test directly on etc pool. same error What error you have? Post it here...
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 05:23:17 AM |
|
21:45:54:383 54900700 Setting DAG epoch #280 for GPU0 21:45:54:383 54900700 Create GPU buffer for GPU0 21:45:54:383 54900700 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 21:45:54:383 54900700 GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
same trouble now with nicehash OpenCL error -38 - cannot write buffer for DAG Switch mining to ETH (epoch 272 for now). I wrote about this few days ago. We need new version of claymore I guess possible drivers trouble? use 18.6.1 14.6 same trouble phoenixminer work without this trouble? add check again. trouble because ETC coin DAG epoch #281 error already write in this topic. make test again later and write log file. swap 60+ gb. 8 gpu rx570 4 gb
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 08:09:17 AM |
|
pool nano coin etc card 2 x rx570 4gb swap size 39gb ram size 4gb
bat file set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100
EthDcrMiner64.exe -allcoins etc -logfile noappend.log -retrydelay 5 -mport -3336 -ttli 75 -mode 1 -eres 0 -asm 2 -tt 65 -ttli 75 -esm 3 -r 1 -cclock 1100 -cvddc 800,800,870,870,870 -mclock 2020,2020,1950,1950,1950 -mvddc 850,850,900,900,900 -powlim 50 -rxboost 1 -di 01234
config file empty
epool file POOL: etc-eu1.nanopool.org:19999, WALLET: removed , PSW: x, ESM: 0, ALLPOOLS: 0
error log
11:00:58:848 13cc Check and remove old log files... 11:00:58:849 13cc args: -allcoins etc -logfile noappend.log -retrydelay 5 -mport -3336 -ttli 75 -mode 1 -eres 0 -asm 2 -tt 65 -ttli 75 -esm 3 -r 1 -cclock 1100 -cvddc 800,800,870,870,870 -mclock 2020,2020,1950,1950,1950 -mvddc 850,850,900,900,900 -powlim 50 -rxboost 1 -di 01234 11:00:58:849 13cc 11:00:58:849 13cc ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 11:00:58:849 13cc є Claymore's Dual GPU Miner - v14.6 є 11:00:58:849 13cc є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є 11:00:58:849 13cc є Supercharged Edition є 11:00:58:851 13cc ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 11:00:58:852 13cc 11:00:58:852 13cc b735 11:00:59:053 13cc ETH: 6 pools are specified 11:00:59:053 13cc Main Ethereum pool is etc-eu1.nanopool.org:19999 11:00:59:398 13cc OpenCL platform: Intel(R) OpenCL 11:00:59:398 13cc OpenCL platform: AMD Accelerated Parallel Processing 11:00:59:399 13cc OpenCL initializing...
11:00:59:399 13cc AMD Cards available: 2 11:00:59:399 13cc GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0) 11:00:59:399 13cc GPU #0 recognized as Radeon RX 470/570 11:00:59:399 13cc GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) 11:00:59:399 13cc GPU #1 recognized as Radeon RX 470/570 11:00:59:399 13cc POOL/SOLO version 11:00:59:400 13cc Platform: Windows 11:00:59:436 13cc start building OpenCL program for GPU 0... 11:00:59:733 13cc done 11:00:59:937 13cc start building OpenCL program for GPU 1... 11:01:00:229 13cc done 11:01:00:469 13cc GPU #0: algorithm ASM 2 11:01:00:512 13cc GPU #1: algorithm ASM 2 11:01:00:512 13cc cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices 11:01:00:513 13cc No NVIDIA CUDA GPUs detected. 11:01:00:513 13cc Total cards: 2 11:01:00:513 13cc Please consider using "-strap" option to increase mining speed, check Readme for details.
11:01:04:117 13cc You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
11:01:05:117 13cc No NVIDIA cards in the list, NVML library will not be used. 11:01:05:119 13cc Driver version: 0x801 11:01:05:134 13cc driver init ok 11:01:05:168 13cc GPU# 0 -rxboost option is applied successfully 11:01:05:201 13cc GPU# 1 -rxboost option is applied successfully 11:01:06:242 13cc SSL: Imported 37 certificates from local storage 11:01:06:251 1bc ETH: Stratum - connecting to 'etc-eu1.nanopool.org' <51.15.89.69> port 19999 (unsecure) 11:01:06:312 1bc sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["removed", "x"], "id": 2, "method": "eth_submitLogin"}
11:01:06:312 1bc ETH: Stratum - Connected (etc-eu1.nanopool.org:19999) (unsecure) 11:01:06:343 13cc ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
11:01:06:344 13cc ETH: eth-proxy stratum mode 11:01:06:345 13cc "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details. 11:01:06:346 13cc Watchdog enabled 11:01:06:347 13cc Remote management (READ-ONLY MODE) is enabled on port 3336 11:01:06:347 13cc
11:01:06:348 13cc You did not specify -dcri values directly, so they will be detected automatically 11:01:06:349 13cc Automatic detection of best -dcri values started, please wait...
11:01:06:389 1bc buf: {"jsonrpc":"2.0","id":2,"result":true} {"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
11:01:06:389 1bc ETH: Authorized 11:01:06:389 1bc sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:01:06:389 1bc remove first packet 243 11:01:06:457 1bc buf: {"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
11:01:06:461 1330 Setting DAG epoch #281... 11:01:08:061 6d8 GPU 0 temp = 50, old fan speed = 75, new fan speed = 79
11:01:08:071 6d8 GPU 1 temp = 48, old fan speed = 77, new fan speed = 78
11:01:09:704 1330 Setting DAG epoch #281 for GPU1 11:01:09:706 13b4 Setting DAG epoch #281 for GPU0 11:01:09:707 13b4 Create GPU buffer for GPU0 11:01:09:708 13b4 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 11:01:09:707 1330 Create GPU buffer for GPU1 11:01:09:708 13b4 GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
11:01:09:709 1330 GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 11:01:09:709 1330 GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
11:01:11:082 6d8 GPU 0 temp = 49, old fan speed = 72, new fan speed = 72
11:01:11:092 6d8 GPU 1 temp = 48, old fan speed = 79, new fan speed = 70
11:01:12:708 13b4 Set global fail flag, failed GPU0 11:01:12:708 13b4 GPU 0 failed 11:01:12:709 c88 Setting DAG epoch #281 for GPU0 11:01:12:710 c88 GPU0, OpenCL error -38 - cannot write buffer for DAG
11:01:12:710 1330 Set global fail flag, failed GPU1 11:01:12:711 1330 GPU 1 failed 11:01:12:712 bb4 Setting DAG epoch #281 for GPU1 11:01:12:712 bb4 GPU1, OpenCL error -38 - cannot write buffer for DAG
11:01:14:103 6d8 GPU 0 temp = 46, old fan speed = 66, new fan speed = 63
11:01:14:113 6d8 GPU 1 temp = 44, old fan speed = 72, new fan speed = 60
11:01:15:712 c88 Set global fail flag, failed GPU0 11:01:15:712 c88 GPU 0 failed 11:01:15:714 bb4 Set global fail flag, failed GPU1 11:01:15:714 bb4 GPU 1 failed 11:01:16:397 1bc ETH: checking pool connection... 11:01:16:397 1bc sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
11:01:16:459 1bc buf: {"jsonrpc":"2.0","id":0,"result":["0xc03304e768748f0e1522de45194a56e320af2fbf33d3fcbc79fb37a423ebe8b1","0x706a056e1dad1a5aeabdf3ce09ebccf47a88a8955c0f27181c5b0de3f7ab9ea9","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
11:01:17:124 6d8 GPU 0 temp = 46, old fan speed = 57, new fan speed = 54
11:01:17:135 6d8 GPU 1 temp = 44, old fan speed = 62, new fan speed = 50
11:01:18:174 d20 Quit... 11:01:18:230 c8 GPU 0 temp = 46, old fan speed = 52, new fan speed = 45
11:01:18:233 c8 GPU 1 temp = 44, old fan speed = 54, new fan speed = 40
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 08:16:38 AM |
|
sure. But two of three rigs just hangs at this same moment (Rx 470 & Rx 480), it happens when ETC touch epoch 280. Below is my config.txt content (they nearly just the same on both machines)
Try "-eres 0". plz check my answer
|
|
|
|
|
elzium
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 09:50:37 AM |
|
How about #benchmark 300+?
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 10:13:06 AM |
|
topic about nvidia card eth dag 278 3.13 GB work fine etc dag 281 3.2 GB dont work. its realy now. -eres 0 dont work
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 10:42:30 AM |
|
check used memory eth use 3.23 gb etc use 3.36 gb
phoenixminer work fine without trouble
|
|
|
|
bategojko74
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 220
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 04:34:11 PM |
|
check used memory eth use 3.23 gb etc use 3.36 gb
phoenixminer work fine without trouble
Does phoenix miner starts if you run it with the following parameters: phoenixminer.exe -bench 330
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 06:55:21 PM |
|
check used memory eth use 3.23 gb etc use 3.36 gb
phoenixminer work fine without trouble
Does phoenix miner starts if you run it with the following parameters: phoenixminer.exe -bench 330 same rate as now 29.5 GPU1: Allocating DAG (3.59) GB; good for epoch up to #332 and perfect work
|
|
|
|
ManuelM92
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2019, 08:32:20 PM |
|
Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example I see the line POL8S1 POL8S2 And crash
Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect
Testing 12* rx 580 xfx on asrock h110 btc pro+
I have exactly the same issue, "strap" option does not work, do you solved it? Claymore 14,7, 8x MSI RX570 4Gb AsRock H110 BTC Pro+
|
|
|
|
McFast
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2019, 02:22:40 PM Last edit: July 25, 2019, 03:20:39 PM by McFast |
|
epoch 280 - ok epoch 281 - not enough memory 8gb ram, 74gb pagefile 12*rx580 4gb adrenaline 18.5.2 eres 0 didnt help 17:12:03:307 2304 Check and remove old log files... 17:12:03:308 2304 args: -benchmark 281 17:12:03:311 2304 17:12:03:312 2304 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 17:12:03:313 2304 º Claymore's Dual GPU Miner - v14.7 º 17:12:03:314 2304 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º 17:12:03:315 2304 º Supercharged Edition º 17:12:03:317 2304 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 17:12:03:318 2304 17:12:03:318 2304 b745 17:12:05:388 2304 OpenCL platform: AMD Accelerated Parallel Processing 17:12:05:393 2304 OpenCL initializing...
17:12:05:394 2304 AMD Cards available: 12 17:12:05:395 2304 GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) 17:12:05:396 2304 GPU #0 recognized as Radeon RX 480/580 17:12:05:398 2304 GPU #1: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 2:0:0) 17:12:05:400 2304 GPU #1 recognized as Radeon RX 480/580 17:12:05:401 2304 GPU #2: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 3:0:0) 17:12:05:402 2304 GPU #2 recognized as Radeon RX 480/580 17:12:05:404 2304 GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) 17:12:05:405 2304 GPU #3 recognized as Radeon RX 480/580 17:12:05:406 2304 GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) 17:12:05:407 2304 GPU #4 recognized as Radeon RX 480/580 17:12:05:408 2304 GPU #5: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 6:0:0) 17:12:05:410 2304 GPU #5 recognized as Radeon RX 480/580 17:12:05:412 2304 GPU #6: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 9:0:0) 17:12:05:413 2304 GPU #6 recognized as Radeon RX 480/580 17:12:05:414 2304 GPU #7: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 10:0:0) 17:12:05:415 2304 GPU #7 recognized as Radeon RX 480/580 17:12:05:417 2304 GPU #8: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 11:0:0) 17:12:05:418 2304 GPU #8 recognized as Radeon RX 480/580 17:12:05:420 2304 GPU #9: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 12:0:0) 17:12:05:431 2304 GPU #9 recognized as Radeon RX 480/580 17:12:05:432 2304 GPU #10: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 13:0:0) 17:12:05:433 2304 GPU #10 recognized as Radeon RX 480/580 17:12:05:439 2304 GPU #11: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 15:0:0) 17:12:05:442 2304 GPU #11 recognized as Radeon RX 480/580 17:12:05:444 2304 POOL/SOLO version 17:12:05:445 2304 Platform: Windows 17:12:05:524 2304 start building OpenCL program for GPU 0... 17:12:05:861 2304 done 17:12:06:066 2304 start building OpenCL program for GPU 1... 17:12:06:354 2304 done 17:12:06:559 2304 start building OpenCL program for GPU 2... 17:12:06:852 2304 done 17:12:07:057 2304 start building OpenCL program for GPU 3... 17:12:07:343 2304 done 17:12:07:547 2304 start building OpenCL program for GPU 4... 17:12:07:830 2304 done 17:12:08:035 2304 start building OpenCL program for GPU 5... 17:12:08:321 2304 done 17:12:08:527 2304 start building OpenCL program for GPU 6... 17:12:08:814 2304 done 17:12:09:019 2304 start building OpenCL program for GPU 7... 17:12:09:302 2304 done 17:12:09:511 2304 start building OpenCL program for GPU 8... 17:12:09:792 2304 done 17:12:09:999 2304 start building OpenCL program for GPU 9... 17:12:10:288 2304 done 17:12:10:492 2304 start building OpenCL program for GPU 10... 17:12:10:775 2304 done 17:12:10:979 2304 start building OpenCL program for GPU 11... 17:12:11:263 2304 done 17:12:11:564 2304 GPU #0: algorithm ASM 1 17:12:11:620 2304 GPU #1: algorithm ASM 1 17:12:11:669 2304 GPU #2: algorithm ASM 1 17:12:11:715 2304 GPU #3: algorithm ASM 1 17:12:11:763 2304 GPU #4: algorithm ASM 1 17:12:11:818 2304 GPU #5: algorithm ASM 1 17:12:11:864 2304 GPU #6: algorithm ASM 1 17:12:11:910 2304 GPU #7: algorithm ASM 1 17:12:11:964 2304 GPU #8: algorithm ASM 1 17:12:12:018 2304 GPU #9: algorithm ASM 1 17:12:12:072 2304 GPU #10: algorithm ASM 1 17:12:12:120 2304 GPU #11: algorithm ASM 1 17:12:12:121 2304 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices 17:12:12:122 2304 No NVIDIA CUDA GPUs detected. 17:12:12:123 2304 Total cards: 12 17:12:12:124 2304 Please consider using "-strap" option to increase mining speed, check Readme for details.
17:12:12:125 2304 Please consider using "-rxboost" option to increase mining speed, check Readme for details.
17:12:12:126 2304 No NVIDIA cards in the list, NVML library will not be used. 17:12:12:545 1fd8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 17:12:12:560 1fd8 ETH: GPU0 off, GPU1 off, GPU2 off, GPU3 off, GPU4 off, GPU5 off, GPU6 off, GPU7 off, GPU8 off, GPU9 off, GPU10 off, GPU11 off 17:12:12:562 1fd8 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 17:12:12:579 1fd8 DCR: GPU0 off, GPU1 off, GPU2 off, GPU3 off, GPU4 off, GPU5 off, GPU6 off, GPU7 off, GPU8 off, GPU9 off, GPU10 off, GPU11 off 17:12:12:593 1fd8 Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30 17:12:13:190 2304 SSL: Imported 45 certificates from local storage 17:12:13:292 2304
17:12:13:293 2304 BENCHMARK MODE!
17:12:13:382 da0 Setting DAG epoch #281... 17:12:15:602 1fd8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 17:12:15:603 1fd8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s 17:12:15:604 1fd8 Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30 17:12:16:649 2454 Setting DAG epoch #281 for GPU0 17:12:16:651 2454 Create GPU buffer for GPU0 17:12:16:652 6f8 Setting DAG epoch #281 for GPU6 17:12:16:654 25f4 Setting DAG epoch #281 for GPU8 17:12:16:656 255c Setting DAG epoch #281 for GPU3 17:12:16:660 2454 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:653 6f8 Create GPU buffer for GPU6 17:12:16:655 2704 Setting DAG epoch #281 for GPU9 17:12:16:656 25c8 Setting DAG epoch #281 for GPU5 17:12:16:658 27ac Setting DAG epoch #281 for GPU2 17:12:16:659 1e20 Setting DAG epoch #281 for GPU11 17:12:16:690 2454 GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:671 111c Setting DAG epoch #281 for GPU7 17:12:16:679 2714 Setting DAG epoch #281 for GPU10 17:12:16:680 25f4 Create GPU buffer for GPU8 17:12:16:686 2704 Create GPU buffer for GPU9 17:12:16:697 25c8 Create GPU buffer for GPU5 17:12:16:669 da0 Setting DAG epoch #281 for GPU1 17:12:16:689 1e20 Create GPU buffer for GPU11 17:12:16:702 6f8 GPU6 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:693 111c Create GPU buffer for GPU7 17:12:16:709 25f4 GPU8 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:696 23c4 Setting DAG epoch #281 for GPU4 17:12:16:717 23c4 Create GPU buffer for GPU4 17:12:16:719 23c4 GPU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:726 25c8 GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:728 25c8 GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:740 da0 Create GPU buffer for GPU1 17:12:16:741 da0 GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:742 111c GPU7 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:747 111c GPU7 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:751 25f4 GPU8 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:688 255c Create GPU buffer for GPU3 17:12:16:753 255c GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:700 27ac Create GPU buffer for GPU2 17:12:16:754 27ac GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:755 1e20 GPU11 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:757 6f8 GPU6 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:759 da0 GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:704 2714 Create GPU buffer for GPU10 17:12:16:760 2714 GPU10 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:763 255c GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:764 23c4 GPU4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:778 27ac GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:780 1e20 GPU11 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:782 2704 GPU9 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 17:12:16:783 2714 GPU10 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:16:784 2704 GPU9 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
17:12:18:612 1fd8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 17:12:18:614 1fd8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s 17:12:18:615 1fd8 Current -dcri values: -dcri 30,30,30,30,30,30,30,30,30,30,30,30 17:12:19:706 2454 Set global fail flag, failed GPU0 17:12:19:706 2454 GPU 0 failed 17:12:19:753 1918 Quit, please wait... 17:12:19:753 2304 Quit, please wait... 17:12:19:753 111c Set global fail flag, failed GPU7 17:12:19:753 111c GPU 7 failed 17:12:19:753 25c8 Set global fail flag, failed GPU5 17:12:19:753 25c8 GPU 5 failed 17:12:19:768 25f4 Set global fail flag, failed GPU8 17:12:19:768 255c Set global fail flag, failed GPU3 17:12:19:768 255c GPU 3 failed 17:12:19:768 6f8 Set global fail flag, failed GPU6 17:12:19:768 6f8 GPU 6 failed 17:12:19:768 da0 Set global fail flag, failed GPU1 17:12:19:768 da0 GPU 1 failed 17:12:19:768 25f4 GPU 8 failed 17:12:19:784 1e20 Set global fail flag, failed GPU11 17:12:19:784 27ac Set global fail flag, failed GPU2 17:12:19:784 23c4 Set global fail flag, failed GPU4 17:12:19:784 1e20 GPU 11 failed 17:12:19:784 27ac GPU 2 failed 17:12:19:784 23c4 GPU 4 failed 17:12:19:799 2714 Set global fail flag, failed GPU10 17:12:19:799 2704 Set global fail flag, failed GPU9 17:12:19:799 2704 GPU 9 failed 17:12:19:799 2714 GPU 10 failed
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2019, 08:01:59 PM |
|
epoch 280 - ok epoch 281 - not enough memory 8gb ram, 74gb pagefile 12*rx580 4gb adrenaline 18.5.2
eres 0 didnt help
drivers 18.6.1 and 19.7.2 same trouble windows 10 1607 1703 1709
|
|
|
|
BFL88
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
July 25, 2019, 10:48:19 PM |
|
Hello, Mining with Claymore has been working fine for years, but recently getting this error with v14.7 GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions. Setting DAG epoch #272 for GPU0 Create GPU buffer for GPU0 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions. Setting DAG epoch #272 for GPU1 Create GPU buffer for GPU1....
.....GPU 0 failed Setting DAG epoch #272 for GPU0 GPU0, OpenCL error -38 - cannot write buffer for DAG GPU 1 failed Setting DAG epoch #272 for GPU1 GPU1, OpenCL error -38 - cannot write buffer for DAG GPU 2 failed... etc,
On Linux/Xubuntu 16 with AMD RX470s 4GB Anyone found a solution...? Have tried ' -eres 0 ' amongst a few other things.... no luck so far
|
|
|
|
|