CeeCee
|
|
August 31, 2017, 01:31:21 PM |
|
i have two rigs. is there any way to mine two different coins? i want one to mine ETH and the other XMR.
|
|
|
|
MetaSk
|
|
August 31, 2017, 01:33:25 PM |
|
i have two rigs. is there any way to mine two different coins? i want one to mine ETH and the other XMR.
You'll need two accounts for that I guess. There's no way to separate miners on the same rig. If you look at the expenses it will be the same
|
|
|
|
ledio
Newbie
Offline
Activity: 39
Merit: 0
|
|
August 31, 2017, 01:36:15 PM |
|
Can't this just be updated in SMOS? Or i need to change my 200 rigs manualy.
If you have 200 rigs don't need to change anything, just relax cruising in new Lambo
|
|
|
|
|
bulgar73
Member
Offline
Activity: 128
Merit: 10
|
|
August 31, 2017, 04:38:26 PM |
|
#edit grub
sudo nano /etc/default/grub
EDIT THESE 2 LINES
GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"
sudo update-grub sudo reboot
after applying this, LAN card on rig do not work. MB Biostar TB85 when starting there are 2-3 red lines, not green OK, but I can not read this, it is too speedy any help THNX
|
|
|
|
joaocha
|
|
August 31, 2017, 04:43:23 PM |
|
#edit grub
sudo nano /etc/default/grub
EDIT THESE 2 LINES
GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"
sudo update-grub sudo reboot
after applying this, LAN card on rig do not work. MB Biostar TB85 when starting there are 2-3 red lines, not green OK, but I can not read this, it is too speedy any help THNX You probably add these 2 lines at the end, and it is not right You have to edit the existing lines, and just add the values GRUB_DEFAULT= "Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"GRUB_CMDLINE_LINUX= "amdgpu.vm_fragment_size=9"
|
|
|
|
bulgar73
Member
Offline
Activity: 128
Merit: 10
|
|
August 31, 2017, 04:46:17 PM |
|
#edit grub
sudo nano /etc/default/grub
EDIT THESE 2 LINES
GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"
sudo update-grub sudo reboot
after applying this, LAN card on rig do not work. MB Biostar TB85 when starting there are 2-3 red lines, not green OK, but I can not read this, it is too speedy any help THNX You probably add these 2 lines at the end, and it is not right You have to edit the existing lines, and just add the values GRUB_DEFAULT= "Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"GRUB_CMDLINE_LINUX= "amdgpu.vm_fragment_size=9"I add just values in existing lines
|
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
August 31, 2017, 06:15:36 PM |
|
simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580
|
|
|
|
potatotda
Newbie
Offline
Activity: 27
Merit: 0
|
|
August 31, 2017, 07:33:07 PM |
|
@ Titanic - is it possible to mine with nicehash so that SMOS pick daily the most profitable coin ?
|
|
|
|
pbuva
|
|
August 31, 2017, 08:07:08 PM |
|
@ Titanic - is it possible to mine with nicehash so that SMOS pick daily the most profitable coin ?
Yes and no, just set miner, algorithm and set nicehash pool. Right coin is set by Nicehash, only algorithm is set stable.
|
|
|
|
Mister305
|
|
August 31, 2017, 08:18:30 PM |
|
Anyone successfully mining monero with RX cards ? What pool you using ? What sgminer settings you went with ? I am mining with the preset setting on sgminer and mining on minergate. Seems like on pool side I am not getting 1/4 of my actual hash rate
|
|
|
|
Bufus
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 31, 2017, 08:43:23 PM |
|
Hi I have one question about overclocking settings in SMOS...
I set my core speed to 915 MHz, but interface on simplemining.net show 1196 MHz always.
I tried to set different speed even with claymore paramatr but it show same values all the time in interface.
Is it necesary to change something in SMOS?
To be honest I am new at linux.
Thanks for any advice
PS: I am using GPU MSI RX560 AERO ITX
|
|
|
|
ysakay
|
|
September 01, 2017, 01:39:17 AM |
|
#edit grub
sudo nano /etc/default/grub
EDIT THESE 2 LINES
GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"
sudo update-grub sudo reboot
after applying this, LAN card on rig do not work. MB Biostar TB85 when starting there are 2-3 red lines, not green OK, but I can not read this, it is too speedy any help THNX You probably add these 2 lines at the end, and it is not right You have to edit the existing lines, and just add the values GRUB_DEFAULT= "Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"GRUB_CMDLINE_LINUX= "amdgpu.vm_fragment_size=9"This can fix the dag?
|
|
|
|
bittawm
Legendary
Offline
Activity: 1894
Merit: 1087
|
|
September 01, 2017, 07:24:34 AM |
|
some of my smos rigs have gone offline ,
when I use hdmi the machine is on but mining to a different pool and not the pool in my config, and it is marked as OFF on my dashboard
has this ever happened to anyone? it is clearly mining but not to my pool / address
|
@bittawm is my real telegram @bittawm is my real twitter beware of impersonators
|
|
|
MetaSk
|
|
September 01, 2017, 07:28:22 AM |
|
some of my smos rigs have gone offline ,
when I use hdmi the machine is on but mining to a different pool and not the pool in my config, and it is marked as OFF on my dashboard
has this ever happened to anyone? it is clearly mining but not to my pool / address
One of my rigs also went offline yesterday First it dropped in OC - OC was stock but it decreased the memory clock even further, it mined that way for an hour or so and then it went offline...
|
|
|
|
aks85
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 01, 2017, 08:56:25 AM |
|
Hello @tytanick,
Can you please tell me why SMOS dashboard take to much time when we click on reboot rig or update overclock it take to much time to process the change to rig. does any one having any issue like me?
also I have found that it does not fully erase overclock setting when I have removed all values in Core Clock and Memory clock. after reboot the rig it is taking my last overclocking setting. To fix this i have reboot my rig 3 to 4 time continuously after that it take default GPU Core Clock and Memory clock.
@tytanick Please Look in to this issue. I don't no any one have same issue like me.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
September 01, 2017, 09:11:09 AM |
|
Hello @tytanick,
Can you please tell me why SMOS dashboard take to much time when we click on reboot rig or update overclock it take to much time to process the change to rig. does any one having any issue like me?
also I have found that it does not fully erase overclock setting when I have removed all values in Core Clock and Memory clock. after reboot the rig it is taking my last overclocking setting. To fix this i have reboot my rig 3 to 4 time continuously after that it take default GPU Core Clock and Memory clock.
@tytanick Please Look in to this issue. I don't no any one have same issue like me.
Reloading isnt helping ? Anyway the slow rsponse it kown problem and i am working on it. Adding Rig grouping feature has also delayed due to some bugs found in code. Anyway i am aware of the slowness and will keep working on it.
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 01, 2017, 09:26:37 AM |
|
simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580
I can only confirm above. simpleminer-RX-v1118_dagfix_computekernel.img.zip does not work with my rig (RX580 and AsRock H110 Pro BTC+). SEE SCREEN SHOT. It was working fine on simpleminer-RX-v1118-kernel4.11-16.60-noaer.img
|
|
|
|
swolepoindexter
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 01, 2017, 09:54:28 AM |
|
Site down?
|
|
|
|
czr
Newbie
Offline
Activity: 27
Merit: 0
|
|
September 01, 2017, 10:06:44 AM |
|
#edit grub
sudo nano /etc/default/grub
EDIT THESE 2 LINES
GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"
sudo update-grub sudo reboot
after applying this, LAN card on rig do not work. MB Biostar TB85 when starting there are 2-3 red lines, not green OK, but I can not read this, it is too speedy any help THNX You probably add these 2 lines at the end, and it is not right You have to edit the existing lines, and just add the values GRUB_DEFAULT= "Advanced options for Ubuntu>Ubuntu, with Linux 4.11.0-kfd-compute-rocm-rel-1.6-148"GRUB_CMDLINE_LINUX= "amdgpu.vm_fragment_size=9"When i do the "sudo apt-key add -" it says "gpg: no valid openPGP data found" Any workaround? Im a linux newbie
|
|
|
|
|