Lixach
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 08:23:22 AM |
|
Hi guys, I have 2 main problems with my rig which are contain 12x gtx1060. It based on Asus prime z270-p. Bios is the latest version, 4g is enabled. so, the 1st problem is working of 12 cards. I've try to explain. When I enter 12cards and turn on system, in nvidia driver settings I see only 11 screens http://imgur.com/a/zGNba. Moreover, when I check each of ones, I see that only 11 cards can manage their seed of fun http://imgur.com/a/jYU3x, but the 12th one can't do that http://imgur.com/a/3c7f3. However, when start the miner, the miner is determine 12 card and start to mine, but one card is overheats, because the script can't manage fun speed of this card. http://imgur.com/a/VIdDn To add to this, I check all problems with hardware: raisers, pci slots, cards - everything is good. When enter whatever card in what ever slot (if it 12th one) - I get the same mistake. When stay only 11card everything is working without any mistakes. The second problem is linked with "screen" utility. Sometimes is occured such mistake http://imgur.com/a/Q23xfmoreover mining procces is not stopped (watchdog said that everything is ok), cards is really work, however hashrate on pool is 0. http://imgur.com/a/qxMInhttp://imgur.com/a/Vx9siCan someone help to solve problems? At the top of the mining process there is an lspci and nvidia-smi output; please post what those show. reinstall whole system. Situation is the same. http://imgur.com/a/o1Tmi
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 08:27:29 AM |
|
Looking for something similar, maybe we can narrow down it to based on algo which is going to be used!?
It should be based on algo or easier to be based on miner, If algo then we should have an algo section, but since coins has already miner sections Its much easier to point each miner to an oc setup
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 08:30:24 AM Last edit: August 28, 2017, 08:43:38 AM by papampi |
|
Hi guys, I have 2 main problems with my rig which are contain 12x gtx1060. It based on Asus prime z270-p. Bios is the latest version, 4g is enabled. so, the 1st problem is working of 12 cards. I've try to explain. When I enter 12cards and turn on system, in nvidia driver settings I see only 11 screens ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2FzGNba&t=665&c=zORsmMyk93BXJQ) . Moreover, when I check each of ones, I see that only 11 cards can manage their seed of fun ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2FjYU3x&t=665&c=v2LF14OQJqrlKA) , but the 12th one can't do that ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2F3c7f3&t=665&c=pzDmf14c16KmIA) . However, when start the miner, the miner is determine 12 card and start to mine, but one card is overheats, because the script can't manage fun speed of this card. To add to this, I check all problems with hardware: raisers, pci slots, cards - everything is good. When enter whatever card in what ever slot (if it 12th one) - I get the same mistake. When stay only 11card everything is working without any mistakes. The second problem is linked with "screen" utility. Sometimes is occured such mistake ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2FQ23xf&t=665&c=mXi_UABE70Rz0A) moreover mining procces is not stopped (watchdog said that everything is ok), cards is really work, however hashrate on pool is 0. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2FqxMIn&t=665&c=6d_0K24aCaXxag) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2Fa%2FVx9si&t=665&c=kBchL4JdXGiXDw) Can someone help to solve problems? At the top of the mining process there is an lspci and nvidia-smi output; please post what those show. reinstall whole system. Situation is the same. What happens when you set manual fan speed ? Does the 12th one applies the speed ? Set fan speed to manual 75 and temp limit to 70 See how it goes. Also try with GPUPowerMizerMode_Adjust="NO" Or try with Maxximus007_AUTO_TEMPERATURE_CONTROL="NO"
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 08:44:39 AM |
|
v0019 is up on Google Drive see the OP for the Link: I will upload to MEGA after sleeping. Lots of changes I will update the OP after sleeping. the SHA256 hash is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 If you are using windows:open a cmd prompt: click the start button and type: then press enter: type the following: CertUtil -hashfile PATH_TO_IMAGE_ZIP_HERE SHA256 and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can find the file path by right clicking the zip and selecting properties If you are using linux:open a terminal and enter the following: sha256sum 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can also type sha256sum then drag the zip to the terminal window to add the absolute path without typing it. If you are using OSX:open a terminal and enter the following: shasum -a 256 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:03:04 AM |
|
v0019 is up on Google Drive see the OP for the Link: I will upload to MEGA after sleeping. Lots of changes I will update the OP after sleeping. the SHA256 hash is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 If you are using windows:open a cmd prompt: click the start button and type: then press enter: type the following: CertUtil -hashfile PATH_TO_IMAGE_ZIP_HERE SHA256 and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can find the file path by right clicking the zip and selecting properties If you are using linux:open a terminal and enter the following: sha256sum 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can also type sha256sum then drag the zip to the terminal window to add the absolute path without typing it. If you are using OSX:open a terminal and enter the following: shasum -a 256 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Awesome, Thanks a lot How to upgrade from v0018? Do we need a full install for upgrade too? Or just uploading 1 bash, 2unix and ... will do the job?
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:11:18 AM |
|
v0019 is up on Google Drive see the OP for the Link: I will upload to MEGA after sleeping. Lots of changes I will update the OP after sleeping. the SHA256 hash is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 If you are using windows:open a cmd prompt: click the start button and type: then press enter: type the following: CertUtil -hashfile PATH_TO_IMAGE_ZIP_HERE SHA256 and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can find the file path by right clicking the zip and selecting properties If you are using linux:open a terminal and enter the following: sha256sum 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can also type sha256sum then drag the zip to the terminal window to add the absolute path without typing it. If you are using OSX:open a terminal and enter the following: shasum -a 256 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Awesome, Thanks a lot How to upgrade from v0018? Do we need a full install for upgrade too? Or just uploading 1 bash, 2unix and ... will do the job? Its definitely full install I guess, but fullzero said he will update OP with full instructions, lets wait for them.
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:49:00 AM |
|
Its definitely full install I guess, but fullzero said he will update OP with full instructions, lets wait for them.
If v0019 is Ubuntu 16.04 too , it shouldn't need full install. Unless it has big changes in distro and softwares. Hopefully it doesnt need full.
|
|
|
|
Bibi187
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:57:56 AM |
|
Its definitely full install I guess, but fullzero said he will update OP with full instructions, lets wait for them.
If v0019 is Ubuntu 16.04 too , it shouldn't need full install. Unless it has big changes in distro and softwares. Hopefully it doesnt need full. My advice, when u switch version. Just do a fresh install, remember to save your alias or anything u have tweaked for your usage. Easy way to do it, have a spare USB card, do your rig one by one So u just have to stop mining for maybe 1 minute.
|
|
|
|
Bibi187
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:59:42 AM |
|
v0019 is up on Google Drive see the OP for the Link: I will upload to MEGA after sleeping. Lots of changes I will update the OP after sleeping. the SHA256 hash is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 If you are using windows:open a cmd prompt: click the start button and type: then press enter: type the following: CertUtil -hashfile PATH_TO_IMAGE_ZIP_HERE SHA256 and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can find the file path by right clicking the zip and selecting properties If you are using linux:open a terminal and enter the following: sha256sum 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Note: you can also type sha256sum then drag the zip to the terminal window to add the absolute path without typing it. If you are using OSX:open a terminal and enter the following: shasum -a 256 'PATH_TO_IMAGE_ZIP_HERE' and press enter if the result is: 9f461a33051568425f616a265d7811b6c3372f61bbcfdbae7d50fb627c57fb38 then the ZIP_containing_the_image is good Thanks as always I appreciate a lot your work ! I will try be more active to help habitual user flow with new version release, once again thanks for your hardwork !
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:11:13 AM |
|
Its definitely full install I guess, but fullzero said he will update OP with full instructions, lets wait for them.
If v0019 is Ubuntu 16.04 too , it shouldn't need full install. Unless it has big changes in distro and softwares. Hopefully it doesnt need full. My advice, when u switch version. Just do a fresh install, remember to save your alias or anything u have tweaked for your usage. Easy way to do it, have a spare USB card, do your rig one by one So u just have to stop mining for maybe 1 minute. I agree, that's the best way going forward so that we don't get any new issues with it!
|
|
|
|
keno1234
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:19:37 AM |
|
v0019 is up on Google Drive see the OP for the Link:
Thank you very much for your hard work.
|
|
|
|
BigSmurf
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:32:15 AM |
|
Hi, after 60h of stable running the hash drops by 50%, but program dose not restart. Is there or can you add an option in 1bash filr " if hash under x Restart" ?
Tnx
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:35:51 AM |
|
Its definitely full install I guess, but fullzero said he will update OP with full instructions, lets wait for them.
If v0019 is Ubuntu 16.04 too , it shouldn't need full install. Unless it has big changes in distro and softwares. Hopefully it doesnt need full. My advice, when u switch version. Just do a fresh install, remember to save your alias or anything u have tweaked for your usage. Easy way to do it, have a spare USB card, do your rig one by one So u just have to stop mining for maybe 1 minute. lol ... its linux, not windows to fresh install with every issue or upgrade If its just a rig is ok, but installing and configuring more is gonna be a headache. I'm gonna stick to v0018 on my current rigs if it needs full. V0019 for new ones Or willing to write an upgrade guide if fullzero provide a complete changelog.
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:40:23 AM |
|
Hi, after 60h of stable running the hash drops by 50%, but program dose not restart. Is there or can you add an option in 1bash filr " if hash under x Restart" ?
Tnx
Hash drops usually for 2 reasons 1- GPU not fully utilize, which Iamnotajeep watchdog will be aware and restart the miner 2- GPU get hot and Maxximus cant get it to temp limit with 100% fan and it will lower the power usuage.
|
|
|
|
BigSmurf
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:51:03 AM |
|
Hi, after 60h of stable running the hash drops by 50%, but program dose not restart. Is there or can you add an option in 1bash filr " if hash under x Restart" ?
Tnx
Hash drops usually for 2 reasons 1- GPU not fully utilize, which Iamnotajeep watchdog will be aware and restart the miner 2- GPU get hot and Maxximus cant get it to temp limit with 100% fan and it will lower the power usuage. Yes but i am using pure P106-100 rig so both of those are disabled. I would like to know if what i asked can be coded so i dont have to manually restart everytime
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 10:59:37 AM |
|
Hi, after 60h of stable running the hash drops by 50%, but program dose not restart. Is there or can you add an option in 1bash filr " if hash under x Restart" ?
Tnx
Hash drops usually for 2 reasons 1- GPU not fully utilize, which Iamnotajeep watchdog will be aware and restart the miner 2- GPU get hot and Maxximus cant get it to temp limit with 100% fan and it will lower the power usuage. Yes but i am using pure P106-100 rig so both of those are disabled. I would like to know if what i asked can be coded so i dont have to manually restart everytime So do you know the reason why your hash drops? Possibility is yes for sure, you need a script to check miner output log and restart miner if needed. But better first find the problem, and solve it, instead of restarting the problem.
|
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 12:56:29 PM |
|
I'm getting this issue (straight from nvOC 19) when I select 'SALFTER_MPH_PROFIT_SWITCHING' as COIN, anyone had this issue?? I've tested URL on RIG's browser, it is working as expected. Traceback (most recent call last): File "/home/m1/mph_switch", line 37, in <module> data=json.loads(fetch("http://miningpoolhub.com/?page=api&action=getminingandprofitsstatistics"))["return"] File "/home/m1/mph_switch", line 32, in fetch return urllib2.build_opener().open(r).read() File "/usr/lib/python2.7/urllib2.py", line 435, in open response = meth(req, response) File "/usr/lib/python2.7/urllib2.py", line 548, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.7/urllib2.py", line 473, in error return self._call_chain(*args) File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain result = func(*args) File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) urllib2.HTTPError: HTTP Error 500: Internal Server Error [WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
[WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
BTW, thank you so much for all the updates with this release, awesome work fullzero as ever, the best mining OS and the best community ever ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 01:07:44 PM |
|
I'm getting this issue (straight from nvOC 19) when I select 'SALFTER_MPH_PROFIT_SWITCHING' as COIN, anyone had this issue?? I've tested URL on RIG's browser, it is working as expected. Traceback (most recent call last): File "/home/m1/mph_switch", line 37, in <module> data=json.loads(fetch("http://miningpoolhub.com/?page=api&action=getminingandprofitsstatistics"))["return"] File "/home/m1/mph_switch", line 32, in fetch return urllib2.build_opener().open(r).read() File "/usr/lib/python2.7/urllib2.py", line 435, in open response = meth(req, response) File "/usr/lib/python2.7/urllib2.py", line 548, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.7/urllib2.py", line 473, in error return self._call_chain(*args) File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain result = func(*args) File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) urllib2.HTTPError: HTTP Error 500: Internal Server Error [WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
[WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
BTW, thank you so much for all the updates with this release, awesome work fullzero as ever, the best mining OS and the best community ever ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Have you tried to install libutempter0 ? sudo apt install libutempter0
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 01:17:28 PM Last edit: August 28, 2017, 05:01:58 PM by damNmad |
|
I'm getting this issue (straight from nvOC 19) when I select 'SALFTER_MPH_PROFIT_SWITCHING' as COIN, anyone had this issue?? I've tested URL on RIG's browser, it is working as expected. Traceback (most recent call last): File "/home/m1/mph_switch", line 37, in <module> data=json.loads(fetch("http://miningpoolhub.com/?page=api&action=getminingandprofitsstatistics"))["return"] File "/home/m1/mph_switch", line 32, in fetch return urllib2.build_opener().open(r).read() File "/usr/lib/python2.7/urllib2.py", line 435, in open response = meth(req, response) File "/usr/lib/python2.7/urllib2.py", line 548, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.7/urllib2.py", line 473, in error return self._call_chain(*args) File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain result = func(*args) File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) urllib2.HTTPError: HTTP Error 500: Internal Server Error [WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
[WARN] Unable to load the library libutempter ! [WARN] The <wall> command will not work in guake ! [WARN] libutempter.so.0: cannot open shared object file: No such file or directory
BTW, thank you so much for all the updates with this release, awesome work fullzero as ever, the best mining OS and the best community ever ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Have you tried to install libutempter0 ? sudo apt install libutempter0 Thanks for the reply, it seems the error has gone using the above install; but mining is not started in guake as expected! m1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner. m1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner. m1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner. m1@m1-desktop:~$
No others errors found! All done.
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 150.
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 150.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value -300.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value -300.
Attribute 'GPUFanControlState' (m1-desktop:0[gpu:7]) assigned value 0.
monero (Cryptonight): 0.00108000 BTC/day (4.64 USD/day) zclassic (Equihash): 0.00100364 BTC/day (4.31 USD/day) zcash (Equihash): 0.00098478 BTC/day (4.23 USD/day) ethereum (Ethash): 0.00098032 BTC/day (4.21 USD/day) ethereum-classic (Ethash): 0.00094537 BTC/day (4.06 USD/day) groestlcoin (Groestl): 0.00092318 BTC/day (3.96 USD/day) maxcoin (Keccak): 0.00079139 BTC/day (3.40 USD/day) expanse (Ethash): 0.00073189 BTC/day (3.14 USD/day) musicoin (Ethash): 0.00068310 BTC/day (2.93 USD/day) vertcoin (Lyra2RE2): 0.00060242 BTC/day (2.59 USD/day) myriadcoin-groestl (Myriad-Groestl): 0.00060066 BTC/day (2.58 USD/day) digibyte-groestl (Myriad-Groestl): 0.00037603 BTC/day (1.61 USD/day) feathercoin (NeoScrypt): 0.00026042 BTC/day (1.12 USD/day) myriadcoin-skein (Skein): 0.00007466 BTC/day (0.32 USD/day) siacoin (Sia): -0.00000641 BTC/day (-0.03 USD/day) digibyte-skein (Skein): -0.00014849 BTC/day (-0.64 USD/day) digibyte-qubit (Qubit): -0.00023583 BTC/day (-1.01 USD/day) geocoin (Qubit): -0.00028547 BTC/day (-1.23 USD/day) dash (X11): -0.00032753 BTC/day (-1.41 USD/day) startcoin (X11): -0.00034090 BTC/day (-1.46 USD/day) verge-scrypt (Scrypt): -0.00040643 BTC/day (-1.74 USD/day) adzcoin (X11): -0.00040828 BTC/day (-1.75 USD/day) litecoin (Scrypt): -0.00041916 BTC/day (-1.80 USD/day) gamecredits (Scrypt): -0.00042298 BTC/day (-1.82 USD/day) sexcoin (Scrypt): -0.00045059 BTC/day (-1.93 USD/day) Will investigate more into it and update; Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|