[ mining os ] nvoc

[minerlone]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit 

[cc33]

Hi,

I didn't manage to connect on any pool that require password for rig, like suprnova.
Tried sigt (before pos), dmd, dgb, mona : no success.
The screen attach to the miner hang, so i can't see any error log. I've seen similar issues in this thread, but no solution.
Rig is : asrock h110 + 2x970 gtx, nvOs on USB key.

Tried the update v0019-1.2 : same problem.

Everything is fine on pools with no password (hush, zen @ minepro, ...)

Any advice on this point ?

[fearherbs1]

Hey guys i'm wondering if someone can figure out what is up with my rig. It boots up and starts mining fine but I have a black screen on my monitor. The weird thing is is I can still ssh in just fine. Any help would be greatly appreciated.

Gigabyte G1 Sniper 5
4770k
2x 3gb gtx1060
1x 6gb gtx 1060
1x 4gb gtx 970

[Reinars]

Another thing.
How can I add email so that nanopool can send me emails when my rig goes offline?
Mining Zcash in nvOC with EWBF
Maybe there are other tools that can give me notifications on phone
thanks

[papabiz]

Guys

I'm running atm only 4 rigs - each 12 gpu 1070 Gtx

Running zcash with EFWB

3/4 running v1,2
1 running v0,19

all of them have these dips. in hashrate look image

what can I do?.

I tried ZM miner , however sometimes I got this network error. I follow the miner's topic on bttalk and latest version could contain a fix for this. waiting for fullzero to release 1,3.

What can I do other than this? any suggestions?

I have the same dips, also use 1070's. Which mobo do u use? I mine ZEC

[NvidiaMining]

Hey guys,

After installing the current version and having no experience with Linux at all, I'm having 2 issues, can you help?

1. I cannot view the miner, typing in "screen -r miner" in the terminal and pressing enter does nothing. Is that the correct place?

2. I switched over to nvOC because i have a rig of 1060s 3GB (MSI Gaming X) and windows does not allow me to go below 100W per card. Even though the cards are close to 300 Sol/s they are very inefficient and my power is expensive. Setting the wattage to a number below 100W on nvOC leads to an error message along the lines of "this wattage will be ignored, values for this GPU needs to be between 100W and 200W". Is there some way for me to bypass this? I saw one card running once on windows with 60W and 240 Sol/s for around 3 minutes, i'd be very glad with a limit of 80 or 75W.

Thank you very much for your help, the OS was really easy to set up and runs fine, very impressed!

[Moordact]

Guys

I'm running atm only 4 rigs - each 12 gpu 1070 Gtx

Running zcash with EFWB

3/4 running v1,2
1 running v0,19

all of them have these dips. in hashrate look image

what can I do?.

I tried ZM miner , however sometimes I got this network error. I follow the miner's topic on bttalk and latest version could contain a fix for this. waiting for fullzero to release 1,3.

What can I do other than this? any suggestions?

I have the same dips, also use 1070's. Which mobo do u use? I mine ZEC

I have biostar bt250 btc pro

[Reinars]

Hey guys,

After installing the current version and having no experience with Linux at all, I'm having 2 issues, can you help?

1. I cannot view the miner, typing in "screen -r miner" in the terminal and pressing enter does nothing. Is that the correct place?

2. I switched over to nvOC because i have a rig of 1060s 3GB (MSI Gaming X) and windows does not allow me to go below 100W per card. Even though the cards are close to 300 Sol/s they are very inefficient and my power is expensive. Setting the wattage to a number below 100W on nvOC leads to an error message along the lines of "this wattage will be ignored, values for this GPU needs to be between 100W and 200W". Is there some way for me to bypass this? I saw one card running once on windows with 60W and 240 Sol/s for around 3 minutes, i'd be very glad with a limit of 80 or 75W.

Thank you very much for your help, the OS was really easy to set up and runs fine, very impressed!

Dont know about the second one.
First one - you have to screen miner in guake terminal. Just hit f12 key and type screen -r miner

[NvidiaMining]

Dont know about the second one.
First one - you have to screen miner in guake terminal. Just hit f12 key and type screen -r miner

Ohhh thanks, that was easy I tried that before, but didn't realize im in the telegram tab and that there is another one. Got it now, thanks again!

[leenoox]

Hey guys,

After installing the current version and having no experience with Linux at all, I'm having 2 issues, can you help?

1. I cannot view the miner, typing in "screen -r miner" in the terminal and pressing enter does nothing. Is that the correct place?

2. I switched over to nvOC because i have a rig of 1060s 3GB (MSI Gaming X) and windows does not allow me to go below 100W per card. Even though the cards are close to 300 Sol/s they are very inefficient and my power is expensive. Setting the wattage to a number below 100W on nvOC leads to an error message along the lines of "this wattage will be ignored, values for this GPU needs to be between 100W and 200W". Is there some way for me to bypass this? I saw one card running once on windows with 60W and 240 Sol/s for around 3 minutes, i'd be very glad with a limit of 80 or 75W.

Thank you very much for your help, the OS was really easy to set up and runs fine, very impressed!

Hrm, it's strange for 1060 to have 100 watt as minimum but it's possible. If that's the case, nvOC and linux in general won't be able to set lower PL if the GPU won't allow it. The only solution would be to flash vbios from another model of 1060 which involves the risk of bricking your GPU... if you want to take the risk google "vbios for GTX 1060". There are tons of other forums that deal with flashing GPU's and I've seen lots of people reporting succesfully flashing vbioses from asus to evga, from msi to zotac, etc. Do your research.

[leenoox]

Hey guys i'm wondering if someone can figure out what is up with my rig. It boots up and starts mining fine but I have a black screen on my monitor. The weird thing is is I can still ssh in just fine. Any help would be greatly appreciated.

Gigabyte G1 Sniper 5
4770k
2x 3gb gtx1060
1x 6gb gtx 1060
1x 4gb gtx 970

Edit 1bash, LOCALorREMOTE, set it to LOCAL

[papabiz]

Guys

I'm running atm only 4 rigs - each 12 gpu 1070 Gtx

Running zcash with EFWB

3/4 running v1,2
1 running v0,19

all of them have these dips. in hashrate look image

what can I do?.

I tried ZM miner , however sometimes I got this network error. I follow the miner's topic on bttalk and latest version could contain a fix for this. waiting for fullzero to release 1,3.

What can I do other than this? any suggestions?

I have the same dips, also use 1070's. Which mobo do u use? I mine ZEC

I have biostar bt250 btc pro

Then its not motherboard related. How's the bt250 when it comes to stability when running 12x 1070's tho?

[Zucca]

Still cannot solve the issue.
I tried with nvOc 0018 and 0019.
To sum up:
I have MSI Z270 gaming plus (quite similar to MSI Z270-a PRO).
Previously 4 ZOTAC Mini 1060 6gb
Now added two EVGA 1060 6Gb
Celeron G3930

• Was mining well with 4 Zotac on nvOc0018 and OC
• I added two EVGA 1060 6Gb to the build, only 4 gpus detected always
• I enabled above 4G memory, 6 gpus detected, starts mining and the OS hangs after 5 min always
• I updated MB Bios and now it throws this error: https://imgur.com/a/QblT1 (No overclock)
• I tried with nvOc 0019 and it restarts after 10 minutes

Okay, I've found the problem:
Two days ago I tried running the whole rig with a wired connection to the router (it was previously connected via tl-wn722n wireless adapter).
It worked, it runned for a day without issues.
So I moved the rig to a friends house, to test his wifi connection, and it also worked.

So, to sum up:
I enabled above 4g memory in my motherboard and connected two more gpus, that caused problems with my wifi connection, and finished in a constant OS hang.

Any ideas for whats going on here?

[ATCkit]

Trying to mine BTX with the TPccminer change as mentioned above gets me to: https://i.imgur.com/3RNw9f9.png

And then it crashes right after. Doesn't matter how low I set the intensity of reduce the overclocks. Any ideas?


EDIT! - I kept restarting it again and again. It mined for a little bit and then crashed, I'm going to keep playing with my settings.

EDIT - I just went back to Zcash, whatever is going on with BTX is just too unstable for me for some reason.

I haven't had much time to check to try to make it work on nvOS with the instructions given on page 203.

However, I did a test on SMOS (ie: simplemining.net):


Use cminer-skunk-krnlx on SMOS with this config example:


-a bitcore -o stratum+tcp://bitcore.mine.zpool.ca:3556 -u 18NDdc1JiZLWR672ph7iNAaRX4eH4BsXgi -p x

I'm getting about 10.4 MHs per 1060 GPU.

I've read that there's an sp-mod which gives higher hash rate than ccmiiner.

[Razvan17]

Guys, pls help, what is -epsw/-dpsw from Claymore arguments?

 - Must I let the file 3main file untached with  -epsw x and -dpsw x ? Or
 - Must I put in 3main file the password declared in the pool account (suprnova) for the miner (-epsw poolaccountminerpsw and -dpsw poolaccountminerpsw) ?

Thx!

[NvidiaMining]

Hrm, it's strange for 1060 to have 100 watt as minimum but it's possible. If that's the case, nvOC and linux in general won't be able to set lower PL if the GPU won't allow it. The only solution would be to flash vbios from another model of 1060 which involves the risk of bricking your GPU... if you want to take the risk google "vbios for GTX 1060". There are tons of other forums that deal with flashing GPU's and I've seen lots of people reporting succesfully flashing vbioses from asus to evga, from msi to zotac, etc. Do your research.

Thanks a lot for your reply, that makes sense. I will have a look but am kinda scared  So no more 1060s for me i suppose

[leenoox]

Still cannot solve the issue.
I tried with nvOc 0018 and 0019.
To sum up:
I have MSI Z270 gaming plus (quite similar to MSI Z270-a PRO).
Previously 4 ZOTAC Mini 1060 6gb
Now added two EVGA 1060 6Gb
Celeron G3930

• Was mining well with 4 Zotac on nvOc0018 and OC
• I added two EVGA 1060 6Gb to the build, only 4 gpus detected always
• I enabled above 4G memory, 6 gpus detected, starts mining and the OS hangs after 5 min always
• I updated MB Bios and now it throws this error: https://imgur.com/a/QblT1 (No overclock)
• I tried with nvOc 0019 and it restarts after 10 minutes

Okay, I've found the problem:
Two days ago I tried running the whole rig with a wired connection to the router (it was previously connected via tl-wn722n wireless adapter).
It worked, it runned for a day without issues.
So I moved the rig to a friends house, to test his wifi connection, and it also worked.

So, to sum up:
I enabled above 4g memory in my motherboard and connected two more gpus, that caused problems with my wifi connection, and finished in a constant OS hang.

Any ideas for whats going on here?

Very unusual problem. If your 6 GPU rig was working at friend's house wifi with the same wireless adapter but not at your house, I would update your router's firmware. I remember there was similar problem with some routers' negotiation/handskake that would cause computer to freeze. Besides updating your router also check if there is new firmware for the wireless adapter as well.

[Temporel]

so I made more tests recently with different coins. (v0019)

All worked fine with great hashrate but VTC.

Tried my own pool, default 1bash pool and other vtc pools and its not mining.

Anyone is currently mining VTC with v0019 ? Any suggestion ?

TYIA

[jlbaseball11]

Another thing.
How can I add email so that nanopool can send me emails when my rig goes offline?
Mining Zcash in nvOC with EWBF
Maybe there are other tools that can give me notifications on phone
thanks

You put your email address after your worker name with a forward slash:
Workername/email@email.com

[minerlone]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit 

Any ideas?

Also, if I run full p106 headless mode it will not set my fans to manual speed, if I turn the option to off it will set the fans to the manual speed.