[OS] nvOC easy-to-use Linux Nvidia Mining

[papampi]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

[1714165678]

1714165678

[1714165678]

1714165678

[1714165678]

1714165678

[1714165678]

1714165678

[1714165678]

1714165678

[1714165678]

1714165678

[Temporel]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

agree, this should be the default zcash miner imo.

[papampi]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

agree, this should be the default zcash miner imo.

It is the default since 19-1.2

[crazydane]

One of my rigs running nvOC is using a MSI Z270-A PRO mobo with 7x 1080Ti's.  Rig is working great, but I got another 1080Ti I want to add to this rig and I'm all maxed out with 6 GPUs in the PCIe slot and the 7th in the M.2 slot via an adaptor.

So I'm going to swap out the mobo for an Asus PRIME Z270-A.  Already got the BIOS on the Asus configured (this will be my 2nd rig with a PRIME Z270-A).

So my question is, can I just stick the 32GB USB with nvOC on it from the MSI in the PRIME after I move the GPU's over, and expect it to just come up and start mining?

If not, no big deal, I'll just image a fresh USB, but since this mobo will be a permanent switch, but if I can safe some time just throwing on the USB used with the MSI, I'd rather do that, but if I'm going to run into issues, I'd rather not find out after tearing the rig down and rebuilding it with the new mobo.

[Razvan17]

I just did it. Thx for advice. Let's see if it will restart again and what would be there about temps, gpu's.....

Can you please explain what is the difference between the 3 types of telegrams? papampi, baliminer and kk003.

I just tried the telegrams "papampi" and "BaliMiner" and I noticed basically is the same thing with few minor differences.

In my case with "papampi" selection it don't show values for GPU utilization, temp, fan and power.

[papampi]

I just did it. Thx for advice. Let's see if it will restart again and what would be there about temps, gpu's.....

Can you please explain what is the difference between the 3 types of telegrams? papampi, baliminer and kk003.

I just tried the telegrams "papampi" and "BaliMiner" and I noticed basically is the same thing with few minor differences.

In my case with "papampi" selection it don't show values for GPU utilization, temp, fan and power.

Are you sure ?
It should show these :

Code:

Mining_Rigs:
Worker: nv102
Boot Time: 2017-10-02 20:01:34
System Up Time: up 1 day, 3 hours, 28 minutes
Miner Uptime:    09:38:32
Currently Mining: "ZEC"
Reboot Required: No
GPU Count: 7
GPU Utilization: 
100 100 99 100 100 100 100
Temp, Fan, Power:
GPU 0, Target temp:  75, Current:  66, Diff:  9, Fan:  60, Power:  120.78
GPU 1, Target temp:  75, Current:  63, Diff:  12, Fan:  60, Power:  116.88
GPU 2, Target temp:  75, Current:  66, Diff:  9, Fan:  60, Power:  116.87
GPU 3, Target temp:  75, Current:  67, Diff:  8, Fan:  60, Power:  118.52
GPU 4, Target temp:  75, Current:  52, Diff:  23, Fan:  60, Power:  121.18
GPU 5, Target temp:  75, Current:  64, Diff:  11, Fan:  60, Power:  123.18
GPU 6, Target temp:  75, Current:  63, Diff:  12, Fan:  60, Power:  119.35

[Razvan17]

Yes, Im sure. I did put that Telegram on my phone and I receive messages but when it cames to gpu, temp... I have no value there.

It would be great to have the screen you posted. Im running the latest ver. 1.2 of nvOC.

[papampi]

Yes, Im sure. I did put that Telegram on my phone and I receive messages but when it cames to gpu, temp... I have no value there.

It would be great to have the screen you posted. Im running the latest ver. 1.2 of nvOC.

The first message can have some empty values since miner just started and logs are empty, wait for 2nd one or push it manually with this command

Code:

bash telegram 

[Razvan17]

Ok, I will do so and I'll let you know.

Thx!

[minerlone]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit 

Any ideas?

Also, if I run full p106 headless mode it will not set my fans to manual speed, if I turn the option to off it will set the fans to the manual speed.

Anybody have these issues?

[papampi]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit  

Any ideas?

Also, if I run full p106 headless mode it will not set my fans to manual speed, if I turn the option to off it will set the fans to the manual speed.

Anybody have these issues?

Is the DOT, SLASH setting correct base on your pool ?

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH    # formerly ETHERMINEdotORG

[Temporel]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

agree, this should be the default zcash miner imo.

It is the default since 19-1.2

Thanks for the info.

Im stiill on v0019, should I upgrade or wait for "official" release (0020) ?

[papampi]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

agree, this should be the default zcash miner imo.

It is the default since 19-1.2

Thanks for the info.

Im stiill on v0019, should I upgrade or wait for "official" release (0020) ?

19-1.3 Coming soon, in a day or two.
There are no bugs/problems to be afraid of in 19-1.2 if you want to upgrade.
I think zm will be updated to 0.5 in 19-1.3 too.

[Temporel]

Loving the dstm's zcash miner
With EWBF I had random gpu utilization drops below 90 and wdog alerts
But with dstm and same oc settings its been 2 days since I seen a utilization drop and alert and utilization is constantly on 99-100 on all gpu's

Recommend to try it if you are mining equihash.
https://bitcointalk.org/index.php?topic=2021765.0
Latest version is 0.5 download and replace your existing in

Code:

/home/m1/zec/zm/

agree, this should be the default zcash miner imo.

It is the default since 19-1.2

Thanks for the info.

Im stiill on v0019, should I upgrade or wait for "official" release (0020) ?

19-1.3 Coming soon, in a day or two.
There are no bugs/problems to be afraid of in 19-1.2 if you want to upgrade.
I think zm will be updated to 0.5 in 19-1.3 too.

thanks again

[Temporel]

so I made more tests recently with different coins. (v0019)

All worked fine with great hashrate but VTC.

Tried my own pool, default 1bash pool and other vtc pools and its not mining.

Anyone is currently mining VTC with v0019 ? Any suggestion ?

TYIA

found my problem, there is no ccminer in the SPccminer directory. Any reason ?

TYIA

[damNmad]

Anyone tried this miner latest version?

https://github.com/KlausT/ccminer-cryptonight/releases

I'm having trouble compiling this miner! If someone compiled it successfully, mind sharing it?

Thanks in advance

[mikespax]

One of my rigs running nvOC is using a MSI Z270-A PRO mobo with 7x 1080Ti's.  Rig is working great, but I got another 1080Ti I want to add to this rig and I'm all maxed out with 6 GPUs in the PCIe slot and the 7th in the M.2 slot via an adaptor.

So I'm going to swap out the mobo for an Asus PRIME Z270-A.  Already got the BIOS on the Asus configured (this will be my 2nd rig with a PRIME Z270-A).

So my question is, can I just stick the 32GB USB with nvOC on it from the MSI in the PRIME after I move the GPU's over, and expect it to just come up and start mining?

If not, no big deal, I'll just image a fresh USB, but since this mobo will be a permanent switch, but if I can safe some time just throwing on the USB used with the MSI, I'd rather do that, but if I'm going to run into issues, I'd rather not find out after tearing the rig down and rebuilding it with the new mobo.

Might as well try. In my case, I always keep a separate USB with a fresh nvOC installed in case I kill the primary one, which tends to happen a lot when I'm switching things around and doing a lot of force shutdowns, usually have boot or stability issues which are quickly fixed with a new usb with a new image.

I wasn't able to use the same usb when I switched to the B250 expert from the z270a prime.

[Temporel]

Regarding the temperature, enable maximus_auto_temp control and set your preffered temperature and it will auto adjust the fans to keep up your desired temp.

weird thing happend tonight. I was testing different cards and after using asccminer I suddenly lost control of the temperature of my 1080Ti, the 1070 are all fine.

I had to shutdown the rig...

Any idea ?

TYIA

[minerlone]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit  

Any ideas?

Also, if I run full p106 headless mode it will not set my fans to manual speed, if I turn the option to off it will set the fans to the manual speed.

Anybody have these issues?

Is the DOT, SLASH setting correct base on your pool ?

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH    # formerly ETHERMINEdotORG

Yes I'm using the correct one, I even tried a different pool to test both DOT and SLASH. I have been heavily hoping on user error, combing through 1bash and trying to figure out what could of happened. I'm having no luck. Makes it even harder to accept that I wrote the IMG to a USB drive and I can't connect to ethereum pools while others can. 

[papampi]

I recently upgraded from version 0017 to 0019-1.2 beta, however claymore dual miner will timeout to any ethereum pool I connect. I tried other versions of claymore and no luck, genoil miner connected without any problems.

I would like to start dual mining again but I need some assistance in troubleshooting. I do not want to revert to 0017. Please help me, I was defeated by google and this forums search limit  

Any ideas?

Also, if I run full p106 headless mode it will not set my fans to manual speed, if I turn the option to off it will set the fans to the manual speed.

Anybody have these issues?

Is the DOT, SLASH setting correct base on your pool ?

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH    # formerly ETHERMINEdotORG

Yes I'm using the correct one, I even tried a different pool to test both DOT and SLASH. I have been heavily hoping on user error, combing through 1bash and trying to figure out what could of happened. I'm having no luck. Makes it even harder to accept that I wrote the IMG to a USB drive and I can't connect to ethereum pools while others can.  

Please post the Eth lines in your 1bash
Check if you dont add a space after your wallet or pool address
like this :

Code:

ETH_ADDRESS="0xCd5A01dF2AEb625672940850F5d08c49CdCE2E93 "