PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[nongkrong]

Even with 2.5d now I'm unable to run the miner, though I'm starting to think it's something on my end. After further investigation once GPUs are identified in the console the error message: "FATAL ERROR: Debugger detected" is shown immediately before it crashes. So there's some update please ? Or maybe i will back to use my last miner software. Anyway thank you for trying make more chipper dev fee mining.

[lesjokolat]

Even with 2.5d now I'm unable to run the miner, though I'm starting to think it's something on my end. After further investigation once GPUs are identified in the console the error message: "FATAL ERROR: Debugger detected" is shown immediately before it crashes. So there's some update please ? Or maybe i will back to use my last miner software. Anyway thank you for trying make more chipper dev fee mining.

id recommend 2.8 or 2.9 if not useing vega 64. also will help to see your bat files configr as well. what driver versions also and may as well spec out gpus you are using.

[rboer]

Please add -coin support for ETHO.

thanks

[MaxMidnite]

Any news, its been a while?

[Digital_Seytan]

The most stable driver for Nvidia 1060 6g?

The most stable driver for Nvidia 1060 6g i tested most nvidia driver in my case best is 390.65
works verry good and stable.

--------
WiNEther Miner is a graphical interface to use with ethminer with advanced watchdog options and monitoring................. . .. Download : https://github.com/digitalpara/WiNETH

[Digital_Seytan]

Hi, You've told us that you will release 3.0 it this end of month and we're already one week away from the end, Any news Phoenix? We're so excited for the new version

Yes come on with the release 3.0 beta ,before I go on vacation I would like to test and of course curious about the new features that have been added.  

[pinamalina]

A hint for nvidia GTX 1070 overclocking.

Currently running with the following OC settings:

On most GPUs with: core: -200, mem:+900, fixed fan speed, fixed power target as per next cmd OC tool:

start nvidiaInspector.exe -setBaseClockOffset:0,0,-200 -setMemoryClockOffset:0,0,880 -setPowerTarget:0,60 -setTempTarget:0,1,65 -setFanSpeed:0,45
start nvidiaInspector.exe -setBaseClockOffset:1,0,-200 -setMemoryClockOffset:1,0,880 -setPowerTarget:1,60 -setTempTarget:1,1,65 -setFanSpeed:1,60
start nvidiaInspector.exe -setBaseClockOffset:2,0,-200 -setMemoryClockOffset:2,0,900 -setPowerTarget:2,60 -setTempTarget:2,1,65 -setFanSpeed:2,45
start nvidiaInspector.exe -setBaseClockOffset:3,0,-200 -setMemoryClockOffset:3,0,625 -setPowerTarget:3,55 -setTempTarget:3,1,65 -setFanSpeed:3,40
start nvidiaInspector.exe -setBaseClockOffset:4,0,-200 -setMemoryClockOffset:4,0,900 -setPowerTarget:4,60 -setTempTarget:4,1,65 -setFanSpeed:4,45
start nvidiaInspector.exe -setBaseClockOffset:5,0,-200 -setMemoryClockOffset:5,0,900 -setPowerTarget:5,60 -setTempTarget:5,1,65 -setFanSpeed:5,60
start nvidiaInspector.exe -setBaseClockOffset:6,0,-200 -setMemoryClockOffset:6,0,900 -setPowerTarget:6,60 -setTempTarget:6,1,65 -setFanSpeed:6,45


When atempting to start the miner, it will fail during the DAG when using the above settings.
So this is what I do:
Step 1: Setup the OC with core: -200, mem +800 as per above.
Step 2: Start the PhoenixMiner and wait for hashing to start (after loading the DAGs).
Step 3: After few minutes apply the OC settings with -200, mem +900.

These are current results:
Eth speed: 417.699 MH/s, shares: 335/0/0, time: 0:58
GPUs: 1: 33.641 MH/s (25) 2: 33.642 MH/s (21) 3: 33.804 MH/s (30) 4: 31.308 MH/s (28) 5: 30.930 MH/s (24) 6: 33.826 MH/s (27) 7: 33.844 MH/s (30) 8: 30.963 MH/s (22) 9: 30.462 MH/s (26) 10: 30.885 MH/s (20) 11: 30.837 MH/s (24) 12: 33.808 MH/s (28) 13: 29.749 MH/s (30)

The GPUs 5,8,9,10,11 and 13 are AMD RX580.

Still in process of increasing the mem clocks but leaving a system for 24h observation between each change to confirm stability.

Happy mining!

[BeretvaJanos]

At DAG update [so every 5 days and a few hours] I'm running into the issue as per the screenshot:

https://pasteboard.co/HlSWewG.png

I tried to find in readme file whether there's a fix for this; I already have 16 GB of virtual memory allocated so that shouldn't be the issue.

The cards in question are all nvidia, so the codes suggested won't work [as it says in title only for AMD].

Any help is appreciated!

Cheers,

Greg

  This is more overclocking and/or PSU releated. If your cards are overclocked, during the DAG generation they may fail as DAG generation is more computationally intensive than the normal ethash computation. Another possible reason is a PSU(s) that are at the limit. During the DAG generation the cards will draw more power and if the PSU is near it's limit, the voltages may drop too much and the cards will crash. We will add the -gser option to serialize the DAG generation to solve the second problem in the next release.
[/quote]

Hi PM,

First of all thanks for the advice; thought I'd give some feedback on the above.
Just to put into context, the cards I'm mining with are 1x1080Ti and 3x1050ti; power usage normally is 410W at the wall; the PSU is good up to 750W so this shouldn't be the issue.
I have however reset to 0 the Core and Mem clock settings  in Afterburner[from +150Core and +1000Mem, effectively going back to 80MH/s from 105.5MH/s] prior to the DAG update this evening and can confirm that the miner hasn't crashed.
During the next few weeks I'll endevour to see which overclock settings would not cause any problems during DAG update; will start with 140/900; at the moment performance is @ 103.5MH/s so will see in about 5 days how it goes.

Cheers,
Greg

[rodney2250]

Hi,

I am th developer of the free monitoring tool - rig-monitor. I have just released version 2.1 which supports phoenixminer .
Check it out here https://bitcointalk.org/index.php?topic=2128602.0

Thanks

[gameboy366]

Please devs, you are losing a lot of money by not capitalising on linux users. I mine on HiveOS and I have tested Pheonixminer on Win10 and there is no doubt that it is the best ethash miner. There's not much time left for ethash GPU mining, so come up with somethig fast.

[Jbodz83]

any plans on doing dual?.

[okiesmokie]

Any news on beta?Thx

[sidaliroy]

Any news on beta?Thx

Yeah it's already the end of the month and the 3.0 beta is not out yet :/ Any info PhoenixMiner?

[UnclWish]

I think author must make Windows 10 1803 April Update compatibility with new drivers.
AMD Adrenalin 18.5.1 driver normal works with Claymrore's miners...

[Iamtutut]

any plans on doing dual?.

Dual mining is dead. XVG just got attacked again. Sia and decred are owned by ASICs...For dual mining, there is claymore. I hope Phoenix won't do the mistake to implement dual mining.

[rboer]

Got a weird error today after windows update. See below out of mem error.
Mining Win10 with 6x 1060 6GB and 16GB PageFile. Resolve it finally by increasing the page file to 24GB.
Hope this helps others.

Code:

2018.05.27:10:37:56.494: main Phoenix Miner 2.9e Windows/msvc - Release
2018.05.27:10:37:56.494: main Cmd line: -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal XXX -proto 3
2018.05.27:10:37:59.271: main Available GPUs for mining:
2018.05.27:10:37:59.272: main GPU1: GeForce GTX 1060 6GB (pcie 1), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.272: main GPU2: GeForce GTX 1060 6GB (pcie 2), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.272: main GPU3: GeForce GTX 1060 6GB (pcie 4), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.272: main GPU4: GeForce GTX 1060 6GB (pcie 6), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.272: main GPU5: GeForce GTX 1060 6GB (pcie 8), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.272: main GPU6: GeForce GTX 1060 6GB (pcie 9), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2018.05.27:10:37:59.283: main NVML library initialized
2018.05.27:10:37:59.506: main Listening for CDM remote manager at port 3333 in read-only mode
2018.05.27:10:37:59.508: main Eth: the pool list contains 4 pools
2018.05.27:10:37:59.508: main Eth: primary pool: eu1.ethermine.org:4444
2018.05.27:10:37:59.508: main Starting GPU mining
2018.05.27:10:37:59.509: wdog Starting watchdog thread
2018.05.27:10:37:59.509: main Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: QtMiner)
2018.05.27:10:37:59.544: eths Eth: Connected to ethash pool eu1.ethermine.org:4444 (94.23.36.128)
2018.05.27:10:37:59.544: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["XXX"]}

2018.05.27:10:37:59.573: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.05.27:10:37:59.573: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.05.27:10:37:59.591: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":2018.05.27:10:37:59.591: eths Eth: New job #7d15954f from eu1.ethermine.org:4444; diff: 4000MH
2018.05.27:10:37:59.592: GPU1 GPU1: Starting up... (0)
2018.05.27:10:37:59.592: GPU1 Eth: Generating light cache for epoch #189
2018.05.27:10:37:59.594: GPU2 GPU2: Starting up... (0)
2018.05.27:10:37:59.595: GPU3 GPU3: Starting up... (0)
2018.05.27:10:37:59.598: GPU4 GPU4: Starting up... (0)
2018.05.27:10:37:59.601: GPU5 GPU5: Starting up... (0)
2018.05.27:10:37:59.602: GPU6 GPU6: Starting up... (0)
2018.05.27:10:37:59.711: main GPU1: 38C 0%, GPU2: 35C 0%, GPU3: 37C 0%, GPU4: 46C 0%, GPU5: 42C 0%, GPU6: 42C 0%
2018.05.27:10:38:00.985: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2018.05.27:10:38:00.985: eths Eth: New job #992bc07d from eu1.ethermine.org:4444; diff: 4000MH
2018.05.27:10:38:02.597: GPU6 GPU6: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.625: GPU5 GPU5: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.625: GPU1 GPU1: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.662: GPU2 GPU2: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.666: GPU4 GPU4: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.681: GPU6 GPU6: Allocating light cache buffer (39.9) MB; good for epoch up to #191
2018.05.27:10:38:02.715: GPU1 GPU1: Allocating light cache buffer (39.9) MB; good for epoch up to #191
2018.05.27:10:38:02.756: GPU5 GPU5: Allocating light cache buffer (39.9) MB; good for epoch up to #191
2018.05.27:10:38:02.780: GPU4 GPU4: Allocating light cache buffer (39.9) MB; good for epoch up to #191
2018.05.27:10:38:02.805: GPU2 GPU2: Allocating light cache buffer (39.9) MB; good for epoch up to #191
2018.05.27:10:38:02.895: GPU6 GPU6: Generating DAG for epoch #189
2018.05.27:10:38:02.906: GPU3 GPU3: Allocating DAG (2.49) GB; good for epoch up to #191
2018.05.27:10:38:02.941: GPU1 GPU1: Generating DAG for epoch #189
2018.05.27:10:38:02.969: GPU5 GPU5: Generating DAG for epoch #189
2018.05.27:10:38:02.992: GPU4 GPU4: Generating DAG for epoch #189
2018.05.27:10:38:03.020: GPU2 GPU2: Generating DAG for epoch #189
[color=red]2018.05.27:10:38:03.099: GPU3 CUDA error in CudaProgram.cu:377 : out of memory (2)
2018.05.27:10:38:03.103: GPU3 GPU3: CUDA memory: 6.00 GB total, 4.97 GB free
2018.05.27:10:38:03.103: GPU3 GPU3 initMiner error: out of memory
2018.05.27:10:38:03.597: wdog Thread(s) not responding. Restarting.[/color]
2018.05.27:10:38:04.557: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.05.27:10:38:04.557: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2018.05.27:10:38:04.592: GPU6 GPU6: DAG  13%
2018.05.27:10:38:04.650: GPU5 GPU5: DAG  13%
2018.05.27:10:38:04.686: GPU4 GPU4: DAG  13%
2018.05.27:10:38:04.703: GPU2 GPU2: DAG  13%
2018.05.27:10:38:04.744: GPU1 GPU1: DAG  13%

[human75]

Hi.
i am. using latest phoinex miner.
i have no stale and no incorrect shares but i have around 15  rejected shares in 36hours.
how do reduce rejected shares to minimum? Many thx in advance for your advices...

[Lunga Chung]

Hi.
i am. using latest phoinex miner.
i have no stale and no incorrect shares but i have around 15  rejected shares in 36hours.
how do reduce rejected shares to minimum? Many thx in advance for your advices...

lower OC

[lncm]

I think author must make Windows 10 1803 April Update compatibility with new drivers.
AMD Adrenalin 18.5.1 driver normal works with Claymrore's miners...

I have 1083 update in one rig, installed 18.5.1 drivers yesterday to try them out, and Phoenix miner worked just fine.

[gameboy366]

Hello, today i first time switched from HiveOS and ethminer to Win10 and Phoenoxminer.

I have one problem, the gpu temp. Is high compared to ethminer in hiveos. 10C high !