PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[hashjunkie]

The only suggestion that comes to mind is to check temperatures, and to remove the core and memory overclock for a while to see if this makes a difference.

I checked my GPU temp logs from GPU-Z and it only maxed out at 56degC, but my Afterburner temp settings were set to 65degC, which matches my -tstop settings in the miner config parameters.

[1714728103]

1714728103

[1714728103]

1714728103

[1714728103]

1714728103

[1714728103]

1714728103

[Biterion]

after 6 more hours make update to win10.. (i can't sleep.. here 4:54AM now)  
used AMD Driver 12.4.2 >>> i can see my GPU all work in device manager  
patch by 'atikmdag-patcher-1.4.7'
switch to compute mode by 'AMD-Compute-Switcher'


but,...
using Phoenix miner 5.2e and 5.3b still same, hashrate still not change like before..

here is the result:

....

any suggestion to make RX480 back to 30Mhs..?
thanks

 Remove the -straps command - it is not supported on Polaris GPUs. Then try mining ETC to see the normal hashrate (you need PhoenixMiner 5.3b) when the DAG actually fits in the VRAM.

You won't be able to mine ETH with full speed on 4 GB cards under Windows any more but it will be more like 20-23 MH/s with the current DAG epoch and will go down a little with each new epoch - you will need to let auto-tine to finish in order to see the final hashrate.

wholaaaaa...
after more than 1 day and half make change to Phoenixminer..
now my miner can run and see my rig hashing..

here is my result:

https://i.postimg.cc/FsTwRvJg/tempsetting.jpg

3x RX480 8Gb average 26,9Mhs
2x R9 390 8Gb average 15Mhs

is it normal.. ?
maybe any other clue to make my setting can be more optimum ?
thanks

[hashjunkie]

The only suggestion that comes to mind is to check temperatures, and to remove the core and memory overclock for a while to see if this makes a difference.

I have removed core and memory overclock settings as you have suggested, and the same thing have just happened again...less than 2hrs into mining with the new settings.  Checked the logs again and for the 2nd time today it seems to be triggering when generating DAG for epoch #0... why??

[lgregori]

1063 normal flight 

[BengalStyle]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

[miner1987]

Does anyone know if Phoenix can auto-ignore unsuitable GPUs? 

[cscheat]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

4GB will be good ROI

[PepsiCoin88]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

Friend, I'm a newbie too, I've read a lot. Buying 4 GB is a stupid thing to do. With 8 GB, you will have more options for mining.
Take 8 GB!!!
 

[bit-sokol]

does anyone knows if there is a way to set fan a little more than 100%? like 150%?

[cscheat]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

Friend, I'm a newbie too, I've read a lot. Buying 4 GB is a stupid thing to do. With 8 GB, you will have more options for mining.
Take 8 GB!!!
 

ETH going POS soon... there won't be any good ETASH coin to mine that required 8GB

[lgregori]

does anyone knows if there is a way to set fan a little more than 100%? like 150%?

Yes,  buy yourself a floor fan and you will be + 50%

[JulesVerne94]

Question, I look everywhere, but there is no normal answer...
can I immediately specify the exchange's wallet?
Just all the examples indicate Metamask, MEW...

[lgregori]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

Friend, I'm a newbie too, I've read a lot. Buying 4 GB is a stupid thing to do. With 8 GB, you will have more options for mining.
Take 8 GB!!!
 

Buy 4GB if it's cheaper

[oklickmanworld]

Question, I look everywhere, but there is no normal answer...
can I immediately specify the exchange's wallet?
Just all the examples indicate Metamask, MEW...

Yes, you can specify the exchange's wallet. But the exchange is not a reliable source of storage.

[zeef]

Thanks for version 

Phoenix i need your help  Cool

Can i insert an .bat for when the miner restart from watchdog to call my overdriventool config .bat?

Sometime one gpu got reseted and how we know gets power hungry Smiley Don´t find this option in readme -rmode help.

or instead can i call my .bat when PM starts on respective .config file , do the same when PM restart from watchdog?

Thanks   

[Jonet]

Hello!
 I'm just getting into mining.
Everyone is talking about 4 GB of RX, and how lucky they are. Should I save money and buy AMD RX570 4 GB now? Or is it better to overpay for 8?
Please give me some advice

Friend, I'm a newbie too, I've read a lot. Buying 4 GB is a stupid thing to do. With 8 GB, you will have more options for mining.
Take 8 GB!!!
 

Buy 4GB if it's cheaper

You got to be kidding! With 4Gb you can mine ETC and some obscure coins that are normally not profitable. At the moment ETH is about 2,5 times more profitable than ETC. And most 4GB cars still mine ETH. What do think happens to ETC profitability when no one is able to run their 4GB cards on ETH?

[batsonxl]

https://ibb.co/02RMx9J

can someone tell me please why on devfee mode it goes to port 19999?
Is there anyway to configure devfees mine only to one address? everytime it changes ports i get into trouble,after 24 hours mining it comletely unable to connect any pool until i will restart the rig.

it mines on ethermine on nanopool comletely messing around with ports

[duplj30]

hi
after the fork, when connecting to the pool etc cruxpool, all the found shares are rejected, then i have to press the R click once or several times (reloading the pools) before the reconnection with the pool goes well and the found shares begin to be accepted, so this is the problem of the version miner 5.3b or pool?

[batsonxl]

https://ibb.co/02RMx9J

can someone tell me please why on devfee mode it goes to port 19999?
Is there anyway to configure devfees mine only to one address? everytime it changes ports i get into trouble,after 24 hours mining it comletely unable to connect any pool until i will restart the rig.

it mines on ethermine on nanopool comletely messing around with ports

@ Phoenix please look at this. i attached picture. as you can see miner fail to connect to nanopool on port 19999 after that im unable connect to original pool until i restart the rig. it mines good devfee on ethermine:5555 but after straight 24 mining it goes to nanopool and trouble starts after 20-24 hours later. thanks

[alizali]

I Mine ETC at  AMD RX 470 4 GB and RX 570 4GB  31.150 Mhs    DRIVER ver 20.4.2 !

-rxboost 100 -daglim 1 -straps 3

and what is your core clock/memory clock?