doktor83 (OP)
|
|
April 09, 2018, 02:18:13 PM |
|
Hi all, srbminer doesn't run. It says 'config.txt parse error'. I have doublechecked the config file, but cannot find where I am wrong. Thank you. start.bat is unmodified. P.S claymore cryptonight runs fine. { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "normalv7",
/* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 47,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
/* Gpu target temperature, leave it on 0 if you don't want to use this option */ "target_temperature" : 60,
/* If you use a SSL/TLS encrypted pool set this to true*/ "pool_use_tls" : false,
/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part */ "pool" : "xmr-asia1.nanopool.org:14444",
/* Address of you wallet */ "wallet" : "48uBGByHY6FdkwQE73depXLvoMYADDRESSHERE",
/* Password for your wallet, probably just x */ "password" : "x",
/* Location for devfee servers, to get better latency */ "location" : "asia",
/* If you want to log console output, put a filename here */ "log_file" : "",
/* Advanced settings for each GPU manually */ /* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */ /* Id starts from 0 , not from 1 !! */ /* To get a list of available devices with their id's, use --listdevices parameter */ /* This is just an example, edit it and remove comment lines !! */
*/"gpu_conf" : [ { "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1}, { "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2}, { "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2}, { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1}, ]*/ }
You've */ messed up in gpu_conf of your script. its not his fault im the guilty one here, as im so tired that i uploaded a messed up config.txt. I re uploaded the zip, corrected that. Sorry guys,time for me to rest a little
|
|
|
|
doktor83 (OP)
|
|
April 09, 2018, 02:20:07 PM |
|
Just an info, next stop is the failover pools, after that i go on ADL (temperature, clocks, voltage etc..) this one will be an interesting trip , then API that gives back basic data.
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
April 09, 2018, 02:21:05 PM |
|
[2018-04-09 16:18:49] GPU0: 1503.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU1: 1484.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU2: 1329.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] GPU3: 1509.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] Total: 5825.0 H/S
awesome speed on heavy with vega 56...the 1,3khs card has monitor plugged in
|
|
|
|
tenmoi
Newbie
Offline
Activity: 59
Merit: 0
|
|
April 09, 2018, 02:24:10 PM |
|
Hi all, srbminer doesn't run. It says 'config.txt parse error'. I have doublechecked the config file, but cannot find where I am wrong. Thank you. start.bat is unmodified. P.S claymore cryptonight runs fine. { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "normalv7",
/* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 47,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
/* Gpu target temperature, leave it on 0 if you don't want to use this option */ "target_temperature" : 60,
/* If you use a SSL/TLS encrypted pool set this to true*/ "pool_use_tls" : false,
/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part */ "pool" : "xmr-asia1.nanopool.org:14444",
/* Address of you wallet */ "wallet" : "48uBGByHY6FdkwQE73depXLvoMYADDRESSHERE",
/* Password for your wallet, probably just x */ "password" : "x",
/* Location for devfee servers, to get better latency */ "location" : "asia",
/* If you want to log console output, put a filename here */ "log_file" : "",
/* Advanced settings for each GPU manually */ /* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */ /* Id starts from 0 , not from 1 !! */ /* To get a list of available devices with their id's, use --listdevices parameter */ /* This is just an example, edit it and remove comment lines !! */
*/"gpu_conf" : [ { "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1}, { "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2}, { "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2}, { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1}, ]*/ }
You've */ messed up in gpu_conf of your script. its not his fault im the guilty one here, as im so tired that i uploaded a messed up config.txt. I re uploaded the zip, corrected that. Sorry guys,time for me to rest a little When are you going to reupload the corrected version? Thank you. PS I was a fool. I didn’t notice the past tense.
|
|
|
|
doktor83 (OP)
|
|
April 09, 2018, 02:25:55 PM |
|
|
|
|
|
heavyarms1912
|
|
April 09, 2018, 02:26:11 PM |
|
its not his fault im the guilty one here, as im so tired that i uploaded a messed up config.txt. I re uploaded the zip, corrected that. Sorry guys,time for me to rest a little When are you going to reupload the corrected version? Thank you. Read the post again. You'll find the answer Just an info, next stop is the failover pools, after that i go on ADL (temperature, clocks, voltage etc..) this one will be an interesting trip , then API that gives back basic data. May I request the reboot script. At times the miner hangs the app doesn't auto-close. Having an independent script reboot the system itself will be helpful.
|
|
|
|
doktor83 (OP)
|
|
April 09, 2018, 02:34:35 PM |
|
V1.3.1- 'gpu_conf' is now a little more advanced , added worksize and threads option, for more fine tuning - Intensity now goes from 0-300 , because on Lite and LiteV7 some cards can go more than 200 - Changed color scheme a little bit - Some optimisations for Hawaii cards (290, 290x, 390, 390x), set intensity to 0 and double_threads to true, or play with manual settings in the 'gpu_conf' part Note: You can still use the old config style for 'gpu_conf' i f you want (id, intensity, double_threads). If mixing double_threads and threads, threads will win and be accepted Nice, will check it out after work. Any optimization for 380 and 380x cards? nothing yet, maybe try : { "id" : 0, "intensity" : 32, "worksize" : 8, "threads" : 2}
|
|
|
|
doktor83 (OP)
|
|
April 09, 2018, 02:37:56 PM |
|
its not his fault im the guilty one here, as im so tired that i uploaded a messed up config.txt. I re uploaded the zip, corrected that. Sorry guys,time for me to rest a little When are you going to reupload the corrected version? Thank you. Read the post again. You'll find the answer Just an info, next stop is the failover pools, after that i go on ADL (temperature, clocks, voltage etc..) this one will be an interesting trip , then API that gives back basic data. May I request the reboot script. At times the miner hangs the app doesn't auto-close. Having an independent script reboot the system itself will be helpful. you mean when it hangs like with the Warning: threadx hashing speed is 0 (x) message? it goes to 4 checks, after that it should shut down and the script takes it over and restarts the miner. you can edit it to restart the whole system if you would like that
|
|
|
|
LeonManveli
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 09, 2018, 02:38:26 PM |
|
Hi! what version of drivers is best for this miner, with AMD R9 290, R9 390 video card? thanks..
|
|
|
|
Bojcha
|
|
April 09, 2018, 02:47:46 PM |
|
Hi! what version of drivers is best for this miner, with AMD R9 290, R9 390 video card? thanks..
try 16.11.4 for win7 and 16.11.5 for win10.
|
|
|
|
DStefanov
|
|
April 09, 2018, 02:53:25 PM |
|
Hi, I have 6xRX480 cards and I mining into https://supportxmr.com/. Can someone give the settings of config.txt file. Thanks.
|
|
|
|
peterboy1
Newbie
Offline
Activity: 168
Merit: 0
|
|
April 09, 2018, 02:56:26 PM |
|
its not his fault im the guilty one here, as im so tired that i uploaded a messed up config.txt. I re uploaded the zip, corrected that. Sorry guys,time for me to rest a little When are you going to reupload the corrected version? Thank you. Read the post again. You'll find the answer Just an info, next stop is the failover pools, after that i go on ADL (temperature, clocks, voltage etc..) this one will be an interesting trip , then API that gives back basic data. May I request the reboot script. At times the miner hangs the app doesn't auto-close. Having an independent script reboot the system itself will be helpful. you mean when it hangs like with the Warning: threadx hashing speed is 0 (x) message? it goes to 4 checks, after that it should shut down and the script takes it over and restarts the miner. you can edit it to restart the whole system if you would like that an optional reboot script really is helpful. i once noticed gpu crashed, so is miner. it doesnt respect the script from start.bat. i forgot to take screenshot.
|
|
|
|
Ale-x1
Newbie
Offline
Activity: 60
Merit: 0
|
|
April 09, 2018, 03:03:03 PM |
|
[2018-04-09 16:18:49] GPU0: 1503.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU1: 1484.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU2: 1329.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] GPU3: 1509.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] Total: 5825.0 H/S
awesome speed on heavy with vega 56...the 1,3khs card has monitor plugged in
You have to get more, about 1900 H/s Howbeit for Vega GPU cast_xmr is better atm.
|
|
|
|
Mind163
Newbie
Offline
Activity: 79
Merit: 0
|
|
April 09, 2018, 03:08:28 PM |
|
[2018-04-09 16:18:49] GPU0: 1503.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU1: 1484.0 H/S [T: 60c, RPM: 2684] [2018-04-09 16:18:49] GPU2: 1329.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] GPU3: 1509.0 H/S [T: 59c, RPM: 1149] [2018-04-09 16:18:49] Total: 5825.0 H/S
awesome speed on heavy with vega 56...the 1,3khs card has monitor plugged in
You have to get more, about 1900 H/s Howbeit for Vega GPU cast_xmr is better atm. Will not work. This algorithm is cryptonight heavy. And what are your intensity settings?
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 09, 2018, 03:21:59 PM |
|
Running fine for more than a day on mixed RX x70/x80 rigs. Dual threads gives 900+H/s on ethash settings.
|
|
|
|
cranefist
Newbie
Offline
Activity: 205
Merit: 0
|
|
April 09, 2018, 03:30:35 PM |
|
Miner seems to crash every time i hit H. It shows 2 of my 4 cards.. and crashes.
|
|
|
|
RaidoP2
Newbie
Offline
Activity: 61
Merit: 0
|
|
April 09, 2018, 04:46:44 PM |
|
V1.3.1- 'gpu_conf' is now a little more advanced , added worksize and threads option, for more fine tuning - Intensity now goes from 0-300 , because on Lite and LiteV7 some cards can go more than 200 - Changed color scheme a little bit - Some optimisations for Hawaii cards (290, 290x, 390, 390x), set intensity to 0 and double_threads to true, or play with manual settings in the 'gpu_conf' part Note: You can still use the old config style for 'gpu_conf' i f you want (id, intensity, double_threads). If mixing double_threads and threads, threads will win and be accepted Nice, will check it out after work. Any optimization for 380 and 380x cards? nothing yet, maybe try : { "id" : 0, "intensity" : 32, "worksize" : 8, "threads" : 2} Thanks for the suggestion! Tried it but still around 550h/s. Will try to play around with it some more. Can you elaborate a bit more on the worksize and intensity relationship? Does the intensity have to be devisable by worksize or how does worksize affect hashing exactly?
|
|
|
|
doktor83 (OP)
|
|
April 09, 2018, 05:16:32 PM |
|
Miner seems to crash every time i hit H. It shows 2 of my 4 cards.. and crashes.
disable adl in .bat, i know about this problem gonna solve it just need some time. make it look like this, i bolded what you have to add, the rest is already there just find it: FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING%EXE% -c config.txt --adldisableTIMEOUT /T 15 /NOBREAK
|
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
April 09, 2018, 05:35:22 PM |
|
Anyone tell me the name of the process this miner creates? Almost done with my miner monitoring program that will kill miners if something goes wrong IE: GPU reaches a certain temperature
Thanks, --J
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
April 09, 2018, 05:54:58 PM |
|
Please can somebody tell me , how to add payment ID to bat file ? i want to mine direct exchange , all want PAyment ID.. thanks
|
|
|
|
|