|
hitmandn
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 12, 2019, 07:18:08 AM |
|
[/quote] I can't open it says the archive is broken, and why is it 45mb ? [/quote] i don't know why, i copy it from folder SRBMiner running. Could you need login my rig for check it, i can give you anydesk info
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 07:35:59 AM |
|
Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine. SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%
Try without the --enablecoinforking parameter, maybe that's causing the issue. Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 07:43:47 AM |
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4 Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900 mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ?
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 07:55:22 AM |
|
Okay, got it now. Checked one of the logs and i reallt think the BC driver is the guilty one here, or maybe not enough virtual memory is allocated. Sometimes precompilation time is just right (few seconds) : [2019-06-09 22:47:53] Precompiling program [BUS_ID: 7] [2019-06-09 22:47:57] Finished program precompilation [BUS_ID: 7] [2019-06-09 22:47:58] Precompiling program [BUS_ID: 3] [2019-06-09 22:48:03] Finished program precompilation [BUS_ID: 3]
And sometimes is crazy high (few minutes) : [2019-06-11 23:47:56] Precompiling program [BUS_ID: 3] [2019-06-11 23:54:19] Finished program precompilation [BUS_ID: 3]
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 08:05:18 AM |
|
Anyone know a coin that is using the old swap algo? Believe it was renamed "Super Fast".
I know about FuryCoin, it uses that algo
|
|
|
|
issie81
|
|
June 12, 2019, 08:44:49 AM Last edit: June 12, 2019, 09:33:37 AM by issie81 |
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4 Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900 mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ? Hello Dok, They tend to 1950/1980 which seems decent if remain stable I run facility with also alot of Asics running also (around 70x) The miners dont go above 60c most play around 50 to 55 So i would say i cool the good also doing 900mV on mem
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 12:50:37 PM |
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4 Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900 mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ? Hello Dok, They tend to 1950/1980 which seems decent if remain stable I run facility with also alot of Asics running also (around 70x) The miners dont go above 60c most play around 50 to 55 So i would say i cool the good also doing 900mV on mem I get ~2100hs on my Gigabyte V56 Hynix with tweak_profile 10, but i guess i am lucky. Going to implement a parameter than 'weakens' the tweak profiles in next version so maybe you will be able to achieve more hash.
|
|
|
|
issie81
|
|
June 12, 2019, 03:05:01 PM |
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4 Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900 mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ? Hello Dok, They tend to 1950/1980 which seems decent if remain stable I run facility with also alot of Asics running also (around 70x) The miners dont go above 60c most play around 50 to 55 So i would say i cool the good also doing 900mV on mem I get ~2100hs on my Gigabyte V56 Hynix with tweak_profile 10, but i guess i am lucky. Going to implement a parameter than 'weakens' the tweak profiles in next version so maybe you will be able to achieve more hash. I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix
|
|
|
|
hitmandn
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 12, 2019, 04:34:18 PM |
|
Okay, got it now. Checked one of the logs and i reallt think the BC driver is the guilty one here, or maybe not enough virtual memory is allocated. Sometimes precompilation time is just right (few seconds) : [2019-06-09 22:47:53] Precompiling program [BUS_ID: 7] [2019-06-09 22:47:57] Finished program precompilation [BUS_ID: 7] [2019-06-09 22:47:58] Precompiling program [BUS_ID: 3] [2019-06-09 22:48:03] Finished program precompilation [BUS_ID: 3]
And sometimes is crazy high (few minutes) : [2019-06-11 23:47:56] Precompiling program [BUS_ID: 3] [2019-06-11 23:54:19] Finished program precompilation [BUS_ID: 3]
I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case
|
|
|
|
doktor83 (OP)
|
|
June 12, 2019, 04:56:07 PM |
|
I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case
try number of gpu's x 8gb. So if 6gpu rig then try 48gb. Also i sent you a personal message
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
June 13, 2019, 12:46:27 AM |
|
Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go. Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine. SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%
Try without the --enablecoinforking parameter, maybe that's causing the issue. Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.
|
|
|
|
hitmandn
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 13, 2019, 11:00:12 AM |
|
I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case
try number of gpu's x 8gb. So if 6gpu rig then try 48gb. Also i sent you a personal message Also i reply you a personal message. Thanks
|
|
|
|
Frianik
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 13, 2019, 11:03:17 PM |
|
Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go. Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine. SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%
Try without the --enablecoinforking parameter, maybe that's causing the issue. Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall. Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
June 14, 2019, 01:00:57 AM |
|
No windows update in my case. Weird. Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go. Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine. SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%
Try without the --enablecoinforking parameter, maybe that's causing the issue. Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall. Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/
|
|
|
|
doktor83 (OP)
|
|
June 14, 2019, 04:36:45 AM |
|
No windows update in my case. Weird. I wish i could reproduce this but i don't know where to start. I think it is not SRB related if it worked and all of a sudden (nothing changed in batch files) it stops and won't work even after restart.. Really weird.
|
|
|
|
Frianik
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 14, 2019, 09:30:23 AM |
|
Did u solved problem? Tried reinstall windows? No windows update in my case. Weird. Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go. Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine. SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%
Try without the --enablecoinforking parameter, maybe that's causing the issue. Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall. Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/
|
|
|
|
Frianik
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 14, 2019, 10:12:25 PM |
|
So... I reinstalled windows and rig works like a charm. I bet on windows update.
|
|
|
|
stzzzz
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 17, 2019, 03:06:11 PM |
|
approx every 30 minutes i receive message about finished precompilation for each gpu. is looks like not ok. just started using tweaking with rx550
|
|
|
|
Frianik
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 17, 2019, 04:53:35 PM |
|
is there any way to store logs in separate folder? better if without hardlinks.
|
|
|
|
|