SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[hitmandn]

Im not surprised you got stale shares, holy cr**, 8 minutes to precompile 15 blocks?!
Please upload the logfile somewhere and send me the link in pm

Here is  my logs file (9rig) and My config, you can see link below:
http://www.mediafire.com/file/weeht8i2775e2ke/LogFile.rar/file

I can't open it says the archive is broken, and why is it 45mb ?  

Try again !!! i download and open normanly or try link without compress
https://www.mediafire.com/folder/qwbd1ubv6engd/

[hitmandn]

[/quote]


I can't open it says the archive is broken, and why is it 45mb ?  
[/quote]
i don't know why, i copy it from folder SRBMiner running. Could you need login my rig for check it, i can give you anydesk info

[doktor83]

Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine.

SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%

Try without the --enablecoinforking parameter, maybe that's causing the issue.

Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.

[doktor83]

i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)

i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s

my startup commando is

--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4

and use OverdriveNtools

core 1450/900
mem 935/900

are some settings off are am i missing a point/setting here?

The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB.

So what is your hashrate with tweak_profile 4 ?

Also are you cooling those Vegas enough ?

[doktor83]

Im not surprised you got stale shares, holy cr**, 8 minutes to precompile 15 blocks?!
Please upload the logfile somewhere and send me the link in pm

Here is  my logs file (9rig) and My config, you can see link below:
http://www.mediafire.com/file/weeht8i2775e2ke/LogFile.rar/file

I can't open it says the archive is broken, and why is it 45mb ?  

Try again !!! i download and open normanly or try link without compress
https://www.mediafire.com/folder/qwbd1ubv6engd/

Okay, got it now.
Checked one of the logs and i reallt think the BC driver is the guilty one here, or maybe not enough virtual memory is allocated.

Sometimes precompilation time is just right (few seconds) :

Code:

[2019-06-09 22:47:53] Precompiling program [BUS_ID: 7]
[2019-06-09 22:47:57] Finished program precompilation [BUS_ID: 7]
[2019-06-09 22:47:58] Precompiling program [BUS_ID: 3]
[2019-06-09 22:48:03] Finished program precompilation [BUS_ID: 3]

And sometimes is crazy high (few minutes) :

Code:

[2019-06-11 23:47:56] Precompiling program [BUS_ID: 3]
[2019-06-11 23:54:19] Finished program precompilation [BUS_ID: 3]

[doktor83]

Anyone know a coin that is using the old swap algo? Believe it was renamed "Super Fast".

I know about FuryCoin, it uses that algo

[issie81]

i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)

i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s

my startup commando is

--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4

and use OverdriveNtools

core 1450/900
mem 935/900

are some settings off are am i missing a point/setting here?

The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB.

So what is your hashrate with tweak_profile 4 ?

Also are you cooling those Vegas enough ?

Hello Dok,

They tend to 1950/1980 which seems decent if remain stable
I run facility with also alot of Asics running also (around 70x)

The miners dont go above 60c most play around 50 to 55
So i would say i cool the good also doing 900mV on mem

[doktor83]

i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)

i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s

my startup commando is

--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4

and use OverdriveNtools

core 1450/900
mem 935/900

are some settings off are am i missing a point/setting here?

The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB.

So what is your hashrate with tweak_profile 4 ?

Also are you cooling those Vegas enough ?

Hello Dok,

They tend to 1950/1980 which seems decent if remain stable
I run facility with also alot of Asics running also (around 70x)

The miners dont go above 60c most play around 50 to 55
So i would say i cool the good also doing 900mV on mem

I get ~2100hs on my Gigabyte V56 Hynix with tweak_profile 10, but i guess i am lucky.
Going to implement a parameter than 'weakens' the tweak profiles in next version so maybe you will be able to achieve more hash.

[issie81]

i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)

i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s

my startup commando is

--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4

and use OverdriveNtools

core 1450/900
mem 935/900

are some settings off are am i missing a point/setting here?

The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB.

So what is your hashrate with tweak_profile 4 ?

Also are you cooling those Vegas enough ?

Hello Dok,

They tend to 1950/1980 which seems decent if remain stable
I run facility with also alot of Asics running also (around 70x)

The miners dont go above 60c most play around 50 to 55
So i would say i cool the good also doing 900mV on mem

I get ~2100hs on my Gigabyte V56 Hynix with tweak_profile 10, but i guess i am lucky.
Going to implement a parameter than 'weakens' the tweak profiles in next version so maybe you will be able to achieve more hash.

I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix

[hitmandn]

Im not surprised you got stale shares, holy cr**, 8 minutes to precompile 15 blocks?!
Please upload the logfile somewhere and send me the link in pm

Here is  my logs file (9rig) and My config, you can see link below:
http://www.mediafire.com/file/weeht8i2775e2ke/LogFile.rar/file

I can't open it says the archive is broken, and why is it 45mb ?  

Try again !!! i download and open normanly or try link without compress
https://www.mediafire.com/folder/qwbd1ubv6engd/

Okay, got it now.
Checked one of the logs and i reallt think the BC driver is the guilty one here, or maybe not enough virtual memory is allocated.

Sometimes precompilation time is just right (few seconds) :

Code:

[2019-06-09 22:47:53] Precompiling program [BUS_ID: 7]
[2019-06-09 22:47:57] Finished program precompilation [BUS_ID: 7]
[2019-06-09 22:47:58] Precompiling program [BUS_ID: 3]
[2019-06-09 22:48:03] Finished program precompilation [BUS_ID: 3]

And sometimes is crazy high (few minutes) :

Code:

[2019-06-11 23:47:56] Precompiling program [BUS_ID: 3]
[2019-06-11 23:54:19] Finished program precompilation [BUS_ID: 3]

I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case

[doktor83]

I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case

try number of gpu's x 8gb. So if 6gpu rig then try 48gb.
Also i sent you a personal message

[MingMining]

Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go.

Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine.

SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%

Try without the --enablecoinforking parameter, maybe that's causing the issue.

Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.

[hitmandn]

I used driver fixdag, only this driver give me 9xx h.how virtual memory should i set it, I set 42gb for this case

try number of gpu's x 8gb. So if 6gpu rig then try 48gb.
Also i sent you a personal message

Also i reply you a personal message. Thanks

[Frianik]

Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go.

Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine.

SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%

Try without the --enablecoinforking parameter, maybe that's causing the issue.

Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.

Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/

[MingMining]

No windows update in my case. Weird. 

Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go.

Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine.

SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%

Try without the --enablecoinforking parameter, maybe that's causing the issue.

Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.

Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/

[doktor83]

No windows update in my case. Weird.  

I wish i could reproduce this but i don't know where to start. I think it is not SRB related if it worked and all of a sudden (nothing changed in batch files) it stops and won't work even after restart.. Really weird.

[Frianik]

Did u solved problem? Tried reinstall windows?

No windows update in my case. Weird. 

Thanks Doc. The first thing I did is ddu and reinstalled the driver. No go.

Thanks Doc. It has been working for weeks. Yesterday it stopped working and I rebooted the box. The miner started to be like that. My other miners are using the same software and same config. All are just fine.

SRBMiner-CN.exe --enablecoinforking --config Config\config-litev7.txt --pools pools.txt --logfile %LOGTIME%

Try without the --enablecoinforking parameter, maybe that's causing the issue.

Interesting, then i guess it isn't that parameter that causes the issue, but maybe windows pulled some driver update. To be sure that's not the case you could do a quick DDU and driver reinstall.

Got the same issue. Noone cn miner works. Seems like its windows update related, but even uninstall last updates wont help :/

[Frianik]

So... I reinstalled windows and rig works like a charm. I bet on windows update.

[stzzzz]

approx every 30 minutes i receive message about finished precompilation for each gpu. is looks like not ok. just started using tweaking with rx550

[Frianik]

is there any way to store logs in separate folder? better if without hardlinks.