Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 24, 2014, 09:01:41 AM |
|
Claymore, please fix the pool switching in this thing. Pool ops are starting to call it the "Claymore effect." Pool goes down for a tenth of a second, and all the Claymore miners disappear. Since almost every bit of code used in an XMR pool is buggy as shit, it needs to be restarted every few hours.
Ok, update will be available in 1-3 hours. 3 reconnect attempt, every 10 seconds, before switching to different pool. Claymore, as per my PMs please add a background thread that polls the main pool every 30sec and switches back when it becomes alive again. And allow normal usernames (eg: sang-2482) for ANY pool address, not just hardcoded support for minergate. These two options will mean that Betarigs picks up Cryptonite algo and we can all rent our mining rigs out if we desire. Your users will love you. I will not do it in this update, sorry, it requires more time than I have for this update, but I will do it in next update.
|
|
|
|
sang
|
|
June 24, 2014, 09:04:47 AM |
|
Claymore, as per my PMs please add a background thread that polls the main pool every 30sec and switches back when it becomes alive again. And allow normal usernames (eg: sang-2482) for ANY pool address, not just hardcoded support for minergate.
These two options will mean that Betarigs picks up Cryptonite algo and we can all rent our mining rigs out if we desire. Your users will love you.
I will not do it in this update, sorry, it requires more time than I have for this update, but I will do it in next update. Excellent!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 24, 2014, 09:44:20 AM |
|
v3.4 is available:
- Now every pool has 3 connection attempts before miner switches to different pool. It prevents miner from disconnection from your main pool if this pool has to be restarted.
|
|
|
|
Frangomel
Legendary
Offline
Activity: 1022
Merit: 1000
FreshTheGame
|
|
June 24, 2014, 09:56:57 AM |
|
Claymore leave pools, its easy to change, make faster gpus
|
|
|
|
fr0wn3r
Member
Offline
Activity: 75
Merit: 10
|
|
June 24, 2014, 10:39:26 AM |
|
I don't see any example of .bat file if you wanna mm BCN/FCN pair on only mm pool, which is unfortunately minergate.com, but can anyone copy one for me please or explain it better than in Read me? Is this formate OK:
GPU_MAX_ALLOC_PERCENT 100 NsGpuCNMiner.exe -o stratum+tcp://fcn-bcn.pool.minergate.com:5558 -u my_mail_I_use_for_minergate_pool -password_I_use_for_minergate
Yup, that is correct. I had to find that one on my own also, but that is exactly how to make MM work on there. Hey Claymore, Why are you hesitant to make the miner work with AMD 14.6 driver? Seems like most miners out there gain a performance of some sort from it. Hehe! Yeah, I only found your post with no adequate answer to it! Cheers mate!
|
|
|
|
Jodlar
Newbie
Offline
Activity: 31
Merit: 0
|
|
June 24, 2014, 10:49:25 AM |
|
450 h/s in v3.2, 460 h/s in v3.3. Stock clocks and bios, 280x powercolor, hynix memory, no riser. It seems I have to check this problem only remotely with logs, so it will take more time to find the reason.
What if the problem is in memory type? Because I have the elpida memory and I get only 360 h/s.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 24, 2014, 11:05:53 AM |
|
450 h/s in v3.2, 460 h/s in v3.3. Stock clocks and bios, 280x powercolor, hynix memory, no riser. It seems I have to check this problem only remotely with logs, so it will take more time to find the reason.
What if the problem is in memory type? Because I have the elpida memory and I get only 360 h/s. we already figured out the speed/stability issue was memory related..... does nobody read previous posts about that issue, given how many times it has been covered....
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
June 24, 2014, 11:06:51 AM |
|
What about solo miner if it possible with that strange wallet ? I don't like this situation with the pools we have, something crash like escrow, something disconnect and so on.
|
|
|
|
33reg
Full Member
Offline
Activity: 231
Merit: 101
xmining.org
|
|
June 24, 2014, 11:30:23 AM |
|
There was a problem with 3.4 Driver crash - HD 7970 This problems are absent with 3.3
|
|
|
|
erik_kimmo
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 24, 2014, 12:04:16 PM |
|
Does miner support minergate??? I have 5-6 Kh/s working on minergate for 12 hours, get 0.2 XRM
Confirm. Didn't work correctly with minergate this night. Hashrate displayed correctly in the minergate account window, but the shares takes the wrong. I also have 3 Kh / s working on merged minig minergate for 11 hours. Get 0.1 XMR fnd 12 FCN instead of 2.3 XMR And 19 FCN. Minergate reports about 49,000 taken shares on each coin.
Guys, I confirm the problem and it was at our end. We had a hardware failure yesterday on the main data center. Automatically switched to reserving DC, but unfortunately it's running too old monero daemons, so all blocks were submitted ok and all shares were calculated correctly, but we received much less XMR than expected. Fixed tonight. I'm very sorry for that issue. We do our best to improve MinerGate and provide better service for you.
|
|
|
|
digicoin
Legendary
Offline
Activity: 1106
Merit: 1000
|
|
June 24, 2014, 12:58:08 PM |
|
v3.4 is available:
- Now every pool has 3 connection attempts before miner switches to different pool. It prevents miner from disconnection from your main pool if this pool has to be restarted.
Unable to use it. It asked me for unknown options
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 24, 2014, 01:17:46 PM |
|
v3.4 is available:
- Now every pool has 3 connection attempts before miner switches to different pool. It prevents miner from disconnection from your main pool if this pool has to be restarted.
Unable to use it. It asked me for unknown options May be you can provide more details? I extract v3.4 to separate folder, start pool.bat and it's working.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 24, 2014, 01:44:33 PM |
|
v3.4 is available:
- Now every pool has 3 connection attempts before miner switches to different pool. It prevents miner from disconnection from your main pool if this pool has to be restarted.
Unable to use it. It asked me for unknown options May be you can provide more details? I extract v3.4 to separate folder, start pool.bat and it's working. Claymore are you able to look into the cpu miner not being able to allocate memory on windows 8/8.1?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 24, 2014, 02:02:13 PM |
|
v3.4 is available:
- Now every pool has 3 connection attempts before miner switches to different pool. It prevents miner from disconnection from your main pool if this pool has to be restarted.
Unable to use it. It asked me for unknown options May be you can provide more details? I extract v3.4 to separate folder, start pool.bat and it's working. Claymore are you able to look into the cpu miner not being able to allocate memory on windows 8/8.1? Yes, I think you should check its thread before asking here, I posted answer some time ago
|
|
|
|
trip96
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 24, 2014, 02:24:33 PM |
|
Hey I know you didn't say you updated 3.4 to deal with some of the 280x problems and it appears to have to do with those cards with Elpida memory. Do you (or does anyone for that matter) think this may be fixable with a BOIS firmware update on the card? I hurt myself the other day and I'm immobile right now, looking for ways to sort this out. Thanks guys!
|
|
|
|
frenkyshka
Newbie
Offline
Activity: 34
Merit: 0
|
|
June 24, 2014, 03:16:28 PM |
|
This days was lots of jumpings form pool to pool, it was easy to hurt youself.
|
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
|
June 24, 2014, 04:25:54 PM |
|
I have 10 rigs + other 3 rigs friend of mine, all of them are 4xGPU, 280x (Sapphire, Asus) 7970 (Sapphire), all sorts of cards combined, but I never had a problem with ver. 3.x, which is most people stating in here. For tweaking I'm using MSI afterburner, if you have low hashrates and clocks are jumping, just try to give more volts. I did not made any other adjustments. And as well I'm mining with 2-3 threads with CPU on those rigs. It's running full throttle and nothing is lagging, everything is running stable. So I can say there is no problem at all with Claymore miner.
|
This is my signature...
|
|
|
BitRock
|
|
June 24, 2014, 04:29:29 PM |
|
I have 10 rigs + other 3 rigs friend of mine, all of them are 4xGPU, 280x (Sapphire, Asus) 7970 (Sapphire), all sorts of cards combined, but I never had a problem with ver. 3.x, which is most people stating in here. For tweaking I'm using MSI afterburner, if you have low hashrates and clocks are jumping, just try to give more volts. I did not made any other adjustments. And as well I'm mining with 2-3 threads with CPU on those rigs. It's running full throttle and nothing is lagging, everything is running stable. So I can say there is no problem at all with Claymore miner.
what is the hash rate you get with 280x and 7970?
|
|
|
|
Jshank
Member
Offline
Activity: 75
Merit: 10
|
|
June 24, 2014, 04:35:16 PM |
|
Anybody try updating vbios on gigabyte cards? Some listed on site "F" version scared me off.
|
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
|
June 24, 2014, 04:38:58 PM |
|
what is the hash rate you get with 280x and 7970?
440-460 h/s there is no big difference between those two models
|
This is my signature...
|
|
|
|