caston
|
|
July 28, 2011, 03:33:30 PM |
|
Sorry if this has been posted already but if I want to "roll my own" version of Linux coin with a few changes are there some instructions?
|
bitcoin BTC: 1MikVUu1DauWB33T5diyforbQjTWJ9D4RF bitcoin cash: 1JdkCGuW4LSgqYiM6QS7zTzAttD9MNAsiK
-updated 3rd December 2017
|
|
|
drgr33n (OP)
|
|
July 28, 2011, 03:39:56 PM |
|
Sorry if this has been posted already but if I want to "roll my own" version of Linux coin with a few changes are there some instructions?
Not for linuxcoin but if you would like to make some modifications send them over to me and I'll take a look. If they are local changes then you can add them via persistence. Or you could extract the filesystem and make your changes then pack it all back up and remaster the ISO ? or even debanize your changes ?
|
|
|
|
caston
|
|
July 28, 2011, 03:49:19 PM |
|
Sorry if this has been posted already but if I want to "roll my own" version of Linux coin with a few changes are there some instructions?
Not for linuxcoin but if you would like to make some modifications send them over to me and I'll take a look. If they are local changes then you can add them via persistence. Or you could extract the filesystem and make your changes then pack it all back up and remaster the ISO ? or even debanize your changes ? Thank you. I remember there being guides for "roll your own" for Knoppix and Morphix so it would probably be similar. I was thinking of making a live cd for a new currency e.g. with multicoin. Another question I have does it make much difference to your hashrate if you run headless?
|
bitcoin BTC: 1MikVUu1DauWB33T5diyforbQjTWJ9D4RF bitcoin cash: 1JdkCGuW4LSgqYiM6QS7zTzAttD9MNAsiK
-updated 3rd December 2017
|
|
|
drgr33n (OP)
|
|
July 28, 2011, 04:14:55 PM |
|
Sorry if this has been posted already but if I want to "roll my own" version of Linux coin with a few changes are there some instructions?
Not for linuxcoin but if you would like to make some modifications send them over to me and I'll take a look. If they are local changes then you can add them via persistence. Or you could extract the filesystem and make your changes then pack it all back up and remaster the ISO ? or even debanize your changes ? Thank you. I remember there being guides for "roll your own" for Knoppix and Morphix so it would probably be similar. I was thinking of making a live cd for a new currency e.g. with multicoin. Another question I have does it make much difference to your hashrate if you run headless? Yea it's the same bud check out debian-live for more info on how to compile a live debian system. If you was going to branch off and make your own changes and you want to use linuxcoin I would suggest you make your own repo and debianize the packages unless you want to change lots of core files ? then I would create your own debian live cd and add the extra's.
|
|
|
|
norulezapply
|
|
July 28, 2011, 07:21:22 PM Last edit: July 28, 2011, 09:46:45 PM by norulezapply |
|
Just updated to the 0.2-prefinal and unfortunately I'm getting some weird errors. When I run atitweak it lists my card (5770) and I can overclock it just fine, but when I try to load phoenix (both with and without smartcoin) or if i try and do a "aticonfig --initial --adapter=all" I get "No supported adapters detected" and phoenix shows an error about OpenCL. But atitweak works fine... I've accepted the SDK license, that doesn't help either This worked fine in 0.2b! Any ideas? PS I've also noticed it takes a LONG time to start up now too.
|
|
|
|
drgr33n (OP)
|
|
July 28, 2011, 11:10:02 PM |
|
Just updated to the 0.2-prefinal and unfortunately I'm getting some weird errors. When I run atitweak it lists my card (5770) and I can overclock it just fine, but when I try to load phoenix (both with and without smartcoin) or if i try and do a "aticonfig --initial --adapter=all" I get "No supported adapters detected" and phoenix shows an error about OpenCL. But atitweak works fine... I've accepted the SDK license, that doesn't help either This worked fine in 0.2b! Any ideas? PS I've also noticed it takes a LONG time to start up now too. Yes working on this now. Hold back on the testing guys. I'm tired now so going to hit the sack but most of this is fixed now and I've debianized most of the miners and the latest bitcoin client that now includes a wallet encryption feature in house Also you can have a choice of the grsecurity / standard kernel. This added bonus with this way is all you guys with prefinal will need to do to is update the packages from my repository and be up to date. I'll get the repository finalized tomorrow. Thankyou everyone that's tested !!
|
|
|
|
deti
|
|
July 29, 2011, 12:30:24 AM |
|
@ drgr33n
Can you add an easy and quick way (graphical/non terminal) into the "System Tools" Menu to change the monitor resolution and the keyboard settings for non US keyboards? Thanks!
|
|
|
|
deti
|
|
July 29, 2011, 09:18:00 AM Last edit: July 29, 2011, 09:45:44 AM by deti |
|
Two things about linuxcoin-v0.2-prefinal.iso:
1. "Install LinuxCoin onto a HDD"-YouTube manual doesn't work any more. Grub can't be installed ... How can I do it now? I had to move back to linuxcoin-v0.2.1b.iso.
2. Why is /opt/miners/phoenix/phoenix.py not executable by default now? In the previous version it was!
1) Don't install this version to your HDD it's only out for a few more days then you can have the final version. What errors you getting with grub ? 2) Probably forgot to set the permissions on that file. I'll fix it up for the final version. When I do # apt-get install grub I get the 1st OK but not the 2nd and not the 3rd page with the device select option. In the 4th (my 2nd) I can select Yes or No. If I do No the 2nd page appears but it leads me directly to the 4th when I do OK ... Here the Terminal output of the entire HDD procedure root@linuxcoin:/home/user# fdisk /dev/sda
Command (m for help): d Partition number (1-4): 2
Command (m for help): d Selected partition 1
Command (m for help): l
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx 5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data 6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility 8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt 9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary 16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT 1e Hidden W95 FAT1 80 Old Minix
Command (m for help): p
Disk /dev/sda: 7398 MB, 7398300672 bytes 255 heads, 63 sectors/track, 899 cylinders, total 14449806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009083e
Device Boot Start End Blocks Id System
Command (m for help): q
root@linuxcoin:/home/user# apt-get update Get:1 http://www.mirrorservice.org sid InRelease [146 kB] Ign http://ppa.launchpad.net maverick InRelease Get:2 http://ppa.launchpad.net maverick Release.gpg [316 B] Hit http://ppa.launchpad.net maverick Release Ign http://ppa.launchpad.net maverick Release Ign http://ppa.launchpad.net maverick/main Sources/DiffIndex Ign http://ppa.launchpad.net maverick/main amd64 Packages/DiffIndex Ign http://ppa.launchpad.net maverick/main TranslationIndex Hit http://ppa.launchpad.net maverick/main Sources Hit http://ppa.launchpad.net maverick/main amd64 Packages Get:3 http://www.mirrorservice.org sid/main Sources/DiffIndex [2,038 B] Get:4 http://www.mirrorservice.org sid/non-free Sources/DiffIndex [2,023 B] Get:5 http://www.mirrorservice.org sid/contrib Sources/DiffIndex [2,023 B] Get:6 http://www.mirrorservice.org sid/main amd64 Packages/DiffIndex [2,038 B] Get:7 http://www.mirrorservice.org sid/non-free amd64 Packages/DiffIndex [2,023 B] Get:8 http://www.mirrorservice.org sid/contrib amd64 Packages/DiffIndex [2,023 B] Ign http://www.mirrorservice.org sid/contrib TranslationIndex Get:9 http://www.mirrorservice.org sid/main TranslationIndex [2,045 B] Ign http://www.mirrorservice.org sid/non-free TranslationIndex Get:10 http://www.mirrorservice.org sid/main Sources [5,412 kB] Ign http://ppa.launchpad.net maverick/main Translation-en_US Ign http://ppa.launchpad.net maverick/main Translation-en Get:11 http://www.mirrorservice.org sid/non-free 2011-07-25-1414.37.pdiff [820 B] Get:12 http://www.mirrorservice.org sid/contrib 2011-07-25-1414.37.pdiff [876 B] Get:13 http://www.mirrorservice.org sid/main amd64 Packages [7,544 kB] Get:14 http://www.mirrorservice.org sid/non-free 2011-07-25-1414.37.pdiff [820 B] Get:15 http://www.mirrorservice.org sid/contrib 2011-07-25-1414.37.pdiff [876 B] Get:16 http://www.mirrorservice.org sid/non-free amd64 2011-07-25-1414.37.pdiff [478 B] Get:17 http://www.mirrorservice.org sid/non-free amd64 2011-07-25-1414.37.pdiff [478 B] Get:18 http://www.mirrorservice.org sid/contrib amd64 2011-07-25-1414.37.pdiff [235 B] Get:19 http://www.mirrorservice.org sid/contrib amd64 2011-07-25-1414.37.pdiff [235 B] Get:20 http://www.mirrorservice.org sid/non-free 2011-07-26-0212.45.pdiff [864 B] Get:21 http://www.mirrorservice.org sid/non-free 2011-07-26-0212.45.pdiff [864 B] Get:22 http://www.mirrorservice.org sid/contrib 2011-07-26-1414.13.pdiff [850 B] Get:23 http://www.mirrorservice.org sid/contrib 2011-07-26-1414.13.pdiff [850 B] Get:24 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-0212.45.pdiff [419 B] Get:25 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-0212.45.pdiff [419 B] Get:26 http://www.mirrorservice.org sid/contrib amd64 2011-07-26-1414.13.pdiff [480 B] Get:27 http://www.mirrorservice.org sid/contrib amd64 2011-07-26-1414.13.pdiff [480 B] Get:28 http://www.mirrorservice.org sid/non-free 2011-07-26-1414.13.pdiff [31 B] Get:29 http://www.mirrorservice.org sid/non-free 2011-07-26-1414.13.pdiff [31 B] Get:30 http://www.mirrorservice.org sid/contrib 2011-07-27-0214.22.pdiff [29 B] Get:31 http://www.mirrorservice.org sid/contrib 2011-07-27-0214.22.pdiff [29 B] Get:32 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-2015.55.pdiff [546 B] Get:33 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-2015.55.pdiff [546 B] Get:34 http://www.mirrorservice.org sid/contrib amd64 2011-07-27-0214.22.pdiff [229 B] Get:35 http://www.mirrorservice.org sid/contrib amd64 2011-07-27-0214.22.pdiff [229 B] Get:36 http://www.mirrorservice.org sid/non-free 2011-07-26-2015.55.pdiff [1,151 B] Get:37 http://www.mirrorservice.org sid/contrib 2011-07-27-0818.04.pdiff [29 B] Get:38 http://www.mirrorservice.org sid/non-free 2011-07-26-2015.55.pdiff [1,151 B] Get:39 http://www.mirrorservice.org sid/contrib 2011-07-27-0818.04.pdiff [29 B] Ign http://www.mirrorservice.org sid/contrib Translation-en_US Ign http://www.mirrorservice.org sid/contrib Translation-en Get:40 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-0214.22.pdiff [267 B] Get:41 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-0214.22.pdiff [267 B] Ign http://www.mirrorservice.org sid/non-free Translation-en_US Ign http://www.mirrorservice.org sid/non-free Translation-en Get:42 http://www.mirrorservice.org sid/non-free 2011-07-27-1424.45.pdiff [453 B] Get:43 http://www.mirrorservice.org sid/non-free 2011-07-27-1424.45.pdiff [453 B] Get:44 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-1424.45.pdiff [2,968 B] Get:45 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-1424.45.pdiff [2,968 B] Get:46 http://www.mirrorservice.org sid/non-free 2011-07-27-2030.00.pdiff [304 B] Get:47 http://www.mirrorservice.org sid/non-free 2011-07-27-2030.00.pdiff [304 B] Get:48 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-2030.00.pdiff [395 B] Get:49 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-2030.00.pdiff [395 B] Get:50 http://www.mirrorservice.org sid/non-free 2011-07-28-0212.00.pdiff [1,821 B] Get:51 http://www.mirrorservice.org sid/non-free 2011-07-28-0212.00.pdiff [1,821 B] Get:52 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0212.00.pdiff [807 B] Get:53 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0212.00.pdiff [807 B] Get:54 http://www.mirrorservice.org sid/non-free 2011-07-28-0815.43.pdiff [959 B] Get:55 http://www.mirrorservice.org sid/non-free 2011-07-28-0815.43.pdiff [959 B] Get:56 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0815.43.pdiff [1,201 B] Get:57 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0815.43.pdiff [1,201 B] Get:58 http://www.mirrorservice.org sid/non-free 2011-07-28-1358.13.pdiff [294 B] Get:59 http://www.mirrorservice.org sid/non-free 2011-07-28-1358.13.pdiff [294 B] Get:60 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-1358.13.pdiff [242 B] Get:61 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-1358.13.pdiff [242 B] Fetched 13.1 MB in 31s (411 kB/s) Reading package lists... Done W: GPG error: http://ppa.launchpad.net maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1C434D5A7992E892 root@linuxcoin:/home/user# apt-get install gparted Reading package lists... Done Building dependency tree Reading state information... Done gparted is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 73 not upgraded. root@linuxcoin:/home/user# gparted ====================== libparted : 2.3 ====================== root@linuxcoin:/home/user# mkdir linuxcoin root@linuxcoin:/home/user# ls Desktop linuxcoin root@linuxcoin:/home/user# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 7398 MB, 7398300672 bytes 255 heads, 63 sectors/track, 899 cylinders, total 14449806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009083e
Device Boot Start End Blocks Id System /dev/sda1 2048 12351487 6174720 83 Linux /dev/sda2 12351488 14448639 1048576 82 Linux swap / Solaris
Command (m for help): qq
root@linuxcoin:/home/user# mount /dev/sda1 linuxcoin root@linuxcoin:/home/user# df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 5120 8 5112 1% /lib/init/rw tmpfs 205264 680 204584 1% /run tmpfs 5120 0 5120 0% /run/lock tmpfs 410528 24 410504 1% /tmp udev 1017608 0 1017608 0% /dev tmpfs 410528 4 410524 1% /run/shm rootfs 1026312 199980 826332 20% / /dev/sdb1 3903000 805652 3097348 21% /live/image tmpfs 1026312 199980 826332 20% /live/cow tmpfs 1026312 0 1026312 0% /live shmfs 1026312 12 1026300 1% /lib/init/rw/splashy /dev/sdc1 506592 346264 160328 69% /media/DETI /dev/sda1 6077696 143128 5625832 3% /home/user/linuxcoin root@linuxcoin:/home/user# cd / root@linuxcoin:/# df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 5120 8 5112 1% /lib/init/rw tmpfs 205264 664 204600 1% /run tmpfs 5120 0 5120 0% /run/lock tmpfs 410528 24 410504 1% /tmp udev 1017608 0 1017608 0% /dev tmpfs 410528 4 410524 1% /run/shm rootfs 1026312 199992 826320 20% / /dev/sdb1 3903000 805652 3097348 21% /live/image tmpfs 1026312 199992 826320 20% /live/cow tmpfs 1026312 0 1026312 0% /live shmfs 1026312 12 1026300 1% /lib/init/rw/splashy /dev/sda1 6077696 143128 5625832 3% /home/user/linuxcoin root@linuxcoin:/# ls bin etc lib live proc sbin sys var boot home lib32 media root selinux tmp vmlinuz dev initrd.img lib64 opt run srv usr root@linuxcoin:/# cp --preserve -R {bin,boot,etc,home,initrd.img,lib,lib32,lib64,opt,root,run,sbin,selinux,srv,usr,var,vmlinuz} /home/user/linuxcoin cp: cannot copy a directory, `home', into itself, `/home/user/linuxcoin/home' root@linuxcoin:/# cd /home/user/ root@linuxcoin:/home/user# mkdir linuxcoin/{dev,media,mnt,proc,sys,tmp} root@linuxcoin:/home/user# ls Desktop linuxcoin root@linuxcoin:/home/user# ls linuxcoin/ bin etc lib lost+found opt run srv usr boot home lib32 media proc sbin sys var dev initrd.img lib64 mnt root selinux tmp vmlinuz root@linuxcoin:/home/user# mount -o bind /dev linuxcoin/dev root@linuxcoin:/home/user# mount -t proc /proc linuxcoin/proc root@linuxcoin:/home/user# mount -o bind /sys linuxcoin/sys root@linuxcoin:/home/user# chroot linuxcoin root@linuxcoin:/# apt-get install grub Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: grub-common grub-pc grub-pc-bin grub2-common os-prober Suggested packages: multiboot-doc grub-emu xorriso The following NEW packages will be installed: grub grub-common grub-pc grub-pc-bin grub2-common os-prober 0 upgraded, 6 newly installed, 0 to remove and 73 not upgraded. Need to get 3,677 kB of archives. After this operation, 8,696 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-common amd64 1.99-9 [2,566 kB] Get:2 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub2-common amd64 1.99-9 [94.0 kB] Get:3 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-pc-bin amd64 1.99-9 [781 kB] Get:4 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-pc amd64 1.99-9 [92.4 kB] Get:5 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub amd64 0.97-65 [118 kB] Get:6 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main os-prober amd64 1.48 [25.3 kB] Fetched 3,677 kB in 3s (1,199 kB/s) Preconfiguring packages ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package grub-common. (Reading database ... 80182 files and directories currently installed.) Unpacking grub-common (from .../grub-common_1.99-9_amd64.deb) ... Selecting previously deselected package grub2-common. Unpacking grub2-common (from .../grub2-common_1.99-9_amd64.deb) ... Selecting previously deselected package grub-pc-bin. Unpacking grub-pc-bin (from .../grub-pc-bin_1.99-9_amd64.deb) ... Selecting previously deselected package grub-pc. Unpacking grub-pc (from .../grub-pc_1.99-9_amd64.deb) ... Selecting previously deselected package grub. Unpacking grub (from .../grub_0.97-65_amd64.deb) ... Selecting previously deselected package os-prober. Unpacking os-prober (from .../os-prober_1.48_amd64.deb) ... Processing triggers for man-db ... Processing triggers for install-info ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grub-common (1.99-9) ... Setting up grub2-common (1.99-9) ... Setting up grub-pc-bin (1.99-9) ... Setting up grub-pc (1.99-9) ...
Creating config file /etc/default/grub with new version Setting up grub (0.97-65) ... Setting up os-prober (1.48) ... localepurge: Disk space freed in /usr/share/locale: 648 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
Total disk space freed by localepurge: 648 KiB
root@linuxcoin:/# update-grub Killed root@linuxcoin:/# grub-install /dev/sda Killed Auto-detection of a filesystem of /dev/sda1 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to <bug-grub@gnu.org> root@linuxcoin:/# /usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub /usr/sbin/grub-probe: info: /dev/sda1 starts from 2048. /usr/sbin/grub-probe: info: opening the device /dev/sda. /usr/sbin/grub-probe: info: the size of /dev/sda is 14449806. Killed root@linuxcoin:/#
|
|
|
|
drgr33n (OP)
|
|
July 29, 2011, 10:44:23 AM |
|
Two things about linuxcoin-v0.2-prefinal.iso:
1. "Install LinuxCoin onto a HDD"-YouTube manual doesn't work any more. Grub can't be installed ... How can I do it now? I had to move back to linuxcoin-v0.2.1b.iso.
2. Why is /opt/miners/phoenix/phoenix.py not executable by default now? In the previous version it was!
1) Don't install this version to your HDD it's only out for a few more days then you can have the final version. What errors you getting with grub ? 2) Probably forgot to set the permissions on that file. I'll fix it up for the final version. When I do # apt-get install grub I get the 1st OK but not the 2nd and not the 3rd page with the device select option. In the 4th (my 2nd) I can select Yes or No. If I do No the 2nd page appears but it leads me directly to the 4th when I do OK ... Here the Terminal output of the entire HDD procedure root@linuxcoin:/home/user# fdisk /dev/sda
Command (m for help): d Partition number (1-4): 2
Command (m for help): d Selected partition 1
Command (m for help): l
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx 5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data 6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility 8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt 9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary 16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT 1e Hidden W95 FAT1 80 Old Minix
Command (m for help): p
Disk /dev/sda: 7398 MB, 7398300672 bytes 255 heads, 63 sectors/track, 899 cylinders, total 14449806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009083e
Device Boot Start End Blocks Id System
Command (m for help): q
root@linuxcoin:/home/user# apt-get update Get:1 http://www.mirrorservice.org sid InRelease [146 kB] Ign http://ppa.launchpad.net maverick InRelease Get:2 http://ppa.launchpad.net maverick Release.gpg [316 B] Hit http://ppa.launchpad.net maverick Release Ign http://ppa.launchpad.net maverick Release Ign http://ppa.launchpad.net maverick/main Sources/DiffIndex Ign http://ppa.launchpad.net maverick/main amd64 Packages/DiffIndex Ign http://ppa.launchpad.net maverick/main TranslationIndex Hit http://ppa.launchpad.net maverick/main Sources Hit http://ppa.launchpad.net maverick/main amd64 Packages Get:3 http://www.mirrorservice.org sid/main Sources/DiffIndex [2,038 B] Get:4 http://www.mirrorservice.org sid/non-free Sources/DiffIndex [2,023 B] Get:5 http://www.mirrorservice.org sid/contrib Sources/DiffIndex [2,023 B] Get:6 http://www.mirrorservice.org sid/main amd64 Packages/DiffIndex [2,038 B] Get:7 http://www.mirrorservice.org sid/non-free amd64 Packages/DiffIndex [2,023 B] Get:8 http://www.mirrorservice.org sid/contrib amd64 Packages/DiffIndex [2,023 B] Ign http://www.mirrorservice.org sid/contrib TranslationIndex Get:9 http://www.mirrorservice.org sid/main TranslationIndex [2,045 B] Ign http://www.mirrorservice.org sid/non-free TranslationIndex Get:10 http://www.mirrorservice.org sid/main Sources [5,412 kB] Ign http://ppa.launchpad.net maverick/main Translation-en_US Ign http://ppa.launchpad.net maverick/main Translation-en Get:11 http://www.mirrorservice.org sid/non-free 2011-07-25-1414.37.pdiff [820 B] Get:12 http://www.mirrorservice.org sid/contrib 2011-07-25-1414.37.pdiff [876 B] Get:13 http://www.mirrorservice.org sid/main amd64 Packages [7,544 kB] Get:14 http://www.mirrorservice.org sid/non-free 2011-07-25-1414.37.pdiff [820 B] Get:15 http://www.mirrorservice.org sid/contrib 2011-07-25-1414.37.pdiff [876 B] Get:16 http://www.mirrorservice.org sid/non-free amd64 2011-07-25-1414.37.pdiff [478 B] Get:17 http://www.mirrorservice.org sid/non-free amd64 2011-07-25-1414.37.pdiff [478 B] Get:18 http://www.mirrorservice.org sid/contrib amd64 2011-07-25-1414.37.pdiff [235 B] Get:19 http://www.mirrorservice.org sid/contrib amd64 2011-07-25-1414.37.pdiff [235 B] Get:20 http://www.mirrorservice.org sid/non-free 2011-07-26-0212.45.pdiff [864 B] Get:21 http://www.mirrorservice.org sid/non-free 2011-07-26-0212.45.pdiff [864 B] Get:22 http://www.mirrorservice.org sid/contrib 2011-07-26-1414.13.pdiff [850 B] Get:23 http://www.mirrorservice.org sid/contrib 2011-07-26-1414.13.pdiff [850 B] Get:24 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-0212.45.pdiff [419 B] Get:25 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-0212.45.pdiff [419 B] Get:26 http://www.mirrorservice.org sid/contrib amd64 2011-07-26-1414.13.pdiff [480 B] Get:27 http://www.mirrorservice.org sid/contrib amd64 2011-07-26-1414.13.pdiff [480 B] Get:28 http://www.mirrorservice.org sid/non-free 2011-07-26-1414.13.pdiff [31 B] Get:29 http://www.mirrorservice.org sid/non-free 2011-07-26-1414.13.pdiff [31 B] Get:30 http://www.mirrorservice.org sid/contrib 2011-07-27-0214.22.pdiff [29 B] Get:31 http://www.mirrorservice.org sid/contrib 2011-07-27-0214.22.pdiff [29 B] Get:32 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-2015.55.pdiff [546 B] Get:33 http://www.mirrorservice.org sid/non-free amd64 2011-07-26-2015.55.pdiff [546 B] Get:34 http://www.mirrorservice.org sid/contrib amd64 2011-07-27-0214.22.pdiff [229 B] Get:35 http://www.mirrorservice.org sid/contrib amd64 2011-07-27-0214.22.pdiff [229 B] Get:36 http://www.mirrorservice.org sid/non-free 2011-07-26-2015.55.pdiff [1,151 B] Get:37 http://www.mirrorservice.org sid/contrib 2011-07-27-0818.04.pdiff [29 B] Get:38 http://www.mirrorservice.org sid/non-free 2011-07-26-2015.55.pdiff [1,151 B] Get:39 http://www.mirrorservice.org sid/contrib 2011-07-27-0818.04.pdiff [29 B] Ign http://www.mirrorservice.org sid/contrib Translation-en_US Ign http://www.mirrorservice.org sid/contrib Translation-en Get:40 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-0214.22.pdiff [267 B] Get:41 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-0214.22.pdiff [267 B] Ign http://www.mirrorservice.org sid/non-free Translation-en_US Ign http://www.mirrorservice.org sid/non-free Translation-en Get:42 http://www.mirrorservice.org sid/non-free 2011-07-27-1424.45.pdiff [453 B] Get:43 http://www.mirrorservice.org sid/non-free 2011-07-27-1424.45.pdiff [453 B] Get:44 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-1424.45.pdiff [2,968 B] Get:45 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-1424.45.pdiff [2,968 B] Get:46 http://www.mirrorservice.org sid/non-free 2011-07-27-2030.00.pdiff [304 B] Get:47 http://www.mirrorservice.org sid/non-free 2011-07-27-2030.00.pdiff [304 B] Get:48 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-2030.00.pdiff [395 B] Get:49 http://www.mirrorservice.org sid/non-free amd64 2011-07-27-2030.00.pdiff [395 B] Get:50 http://www.mirrorservice.org sid/non-free 2011-07-28-0212.00.pdiff [1,821 B] Get:51 http://www.mirrorservice.org sid/non-free 2011-07-28-0212.00.pdiff [1,821 B] Get:52 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0212.00.pdiff [807 B] Get:53 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0212.00.pdiff [807 B] Get:54 http://www.mirrorservice.org sid/non-free 2011-07-28-0815.43.pdiff [959 B] Get:55 http://www.mirrorservice.org sid/non-free 2011-07-28-0815.43.pdiff [959 B] Get:56 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0815.43.pdiff [1,201 B] Get:57 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-0815.43.pdiff [1,201 B] Get:58 http://www.mirrorservice.org sid/non-free 2011-07-28-1358.13.pdiff [294 B] Get:59 http://www.mirrorservice.org sid/non-free 2011-07-28-1358.13.pdiff [294 B] Get:60 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-1358.13.pdiff [242 B] Get:61 http://www.mirrorservice.org sid/non-free amd64 2011-07-28-1358.13.pdiff [242 B] Fetched 13.1 MB in 31s (411 kB/s) Reading package lists... Done W: GPG error: http://ppa.launchpad.net maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1C434D5A7992E892 root@linuxcoin:/home/user# apt-get install gparted Reading package lists... Done Building dependency tree Reading state information... Done gparted is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 73 not upgraded. root@linuxcoin:/home/user# gparted ====================== libparted : 2.3 ====================== root@linuxcoin:/home/user# mkdir linuxcoin root@linuxcoin:/home/user# ls Desktop linuxcoin root@linuxcoin:/home/user# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 7398 MB, 7398300672 bytes 255 heads, 63 sectors/track, 899 cylinders, total 14449806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009083e
Device Boot Start End Blocks Id System /dev/sda1 2048 12351487 6174720 83 Linux /dev/sda2 12351488 14448639 1048576 82 Linux swap / Solaris
Command (m for help): qq
root@linuxcoin:/home/user# mount /dev/sda1 linuxcoin root@linuxcoin:/home/user# df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 5120 8 5112 1% /lib/init/rw tmpfs 205264 680 204584 1% /run tmpfs 5120 0 5120 0% /run/lock tmpfs 410528 24 410504 1% /tmp udev 1017608 0 1017608 0% /dev tmpfs 410528 4 410524 1% /run/shm rootfs 1026312 199980 826332 20% / /dev/sdb1 3903000 805652 3097348 21% /live/image tmpfs 1026312 199980 826332 20% /live/cow tmpfs 1026312 0 1026312 0% /live shmfs 1026312 12 1026300 1% /lib/init/rw/splashy /dev/sdc1 506592 346264 160328 69% /media/DETI /dev/sda1 6077696 143128 5625832 3% /home/user/linuxcoin root@linuxcoin:/home/user# cd / root@linuxcoin:/# df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 5120 8 5112 1% /lib/init/rw tmpfs 205264 664 204600 1% /run tmpfs 5120 0 5120 0% /run/lock tmpfs 410528 24 410504 1% /tmp udev 1017608 0 1017608 0% /dev tmpfs 410528 4 410524 1% /run/shm rootfs 1026312 199992 826320 20% / /dev/sdb1 3903000 805652 3097348 21% /live/image tmpfs 1026312 199992 826320 20% /live/cow tmpfs 1026312 0 1026312 0% /live shmfs 1026312 12 1026300 1% /lib/init/rw/splashy /dev/sda1 6077696 143128 5625832 3% /home/user/linuxcoin root@linuxcoin:/# ls bin etc lib live proc sbin sys var boot home lib32 media root selinux tmp vmlinuz dev initrd.img lib64 opt run srv usr root@linuxcoin:/# cp --preserve -R {bin,boot,etc,home,initrd.img,lib,lib32,lib64,opt,root,run,sbin,selinux,srv,usr,var,vmlinuz} /home/user/linuxcoin cp: cannot copy a directory, `home', into itself, `/home/user/linuxcoin/home' root@linuxcoin:/# cd /home/user/ root@linuxcoin:/home/user# mkdir linuxcoin/{dev,media,mnt,proc,sys,tmp} root@linuxcoin:/home/user# ls Desktop linuxcoin root@linuxcoin:/home/user# ls linuxcoin/ bin etc lib lost+found opt run srv usr boot home lib32 media proc sbin sys var dev initrd.img lib64 mnt root selinux tmp vmlinuz root@linuxcoin:/home/user# mount -o bind /dev linuxcoin/dev root@linuxcoin:/home/user# mount -t proc /proc linuxcoin/proc root@linuxcoin:/home/user# mount -o bind /sys linuxcoin/sys root@linuxcoin:/home/user# chroot linuxcoin root@linuxcoin:/# apt-get install grub Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: grub-common grub-pc grub-pc-bin grub2-common os-prober Suggested packages: multiboot-doc grub-emu xorriso The following NEW packages will be installed: grub grub-common grub-pc grub-pc-bin grub2-common os-prober 0 upgraded, 6 newly installed, 0 to remove and 73 not upgraded. Need to get 3,677 kB of archives. After this operation, 8,696 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-common amd64 1.99-9 [2,566 kB] Get:2 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub2-common amd64 1.99-9 [94.0 kB] Get:3 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-pc-bin amd64 1.99-9 [781 kB] Get:4 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub-pc amd64 1.99-9 [92.4 kB] Get:5 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main grub amd64 0.97-65 [118 kB] Get:6 http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid/main os-prober amd64 1.48 [25.3 kB] Fetched 3,677 kB in 3s (1,199 kB/s) Preconfiguring packages ... Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package grub-common. (Reading database ... 80182 files and directories currently installed.) Unpacking grub-common (from .../grub-common_1.99-9_amd64.deb) ... Selecting previously deselected package grub2-common. Unpacking grub2-common (from .../grub2-common_1.99-9_amd64.deb) ... Selecting previously deselected package grub-pc-bin. Unpacking grub-pc-bin (from .../grub-pc-bin_1.99-9_amd64.deb) ... Selecting previously deselected package grub-pc. Unpacking grub-pc (from .../grub-pc_1.99-9_amd64.deb) ... Selecting previously deselected package grub. Unpacking grub (from .../grub_0.97-65_amd64.deb) ... Selecting previously deselected package os-prober. Unpacking os-prober (from .../os-prober_1.48_amd64.deb) ... Processing triggers for man-db ... Processing triggers for install-info ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up grub-common (1.99-9) ... Setting up grub2-common (1.99-9) ... Setting up grub-pc-bin (1.99-9) ... Setting up grub-pc (1.99-9) ...
Creating config file /etc/default/grub with new version Setting up grub (0.97-65) ... Setting up os-prober (1.48) ... localepurge: Disk space freed in /usr/share/locale: 648 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB
Total disk space freed by localepurge: 648 KiB
root@linuxcoin:/# update-grub Killed root@linuxcoin:/# grub-install /dev/sda Killed Auto-detection of a filesystem of /dev/sda1 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to <bug-grub@gnu.org> root@linuxcoin:/# /usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub /usr/sbin/grub-probe: info: /dev/sda1 starts from 2048. /usr/sbin/grub-probe: info: opening the device /dev/sda. /usr/sbin/grub-probe: info: the size of /dev/sda is 14449806. Killed root@linuxcoin:/#
Doesn't look like dev is mounted . Can not write log, openpty() failed (/dev/pts not mounted?)
Maybe something went wrong there ? There will be a installer in the final version and also you can install this via linuxcoins reop. Stand by for more info. @ drgr33n
Can you add an easy and quick way (graphical/non terminal) into the "System Tools" Menu to change the monitor resolution and the keyboard settings for non US keyboards? Thanks!
Of course
|
|
|
|
Bruce Wagner
|
|
July 29, 2011, 12:15:11 PM |
|
Could someone please contact me via email or skype or phone about LinuxCoin?
|
|
|
|
drgr33n (OP)
|
|
July 29, 2011, 12:31:52 PM |
|
Could someone please contact me via email or skype or phone about LinuxCoin?
Sure Bruce sent you a PM. If you could send me your skype details I'll give you a call.
|
|
|
|
drgr33n (OP)
|
|
July 29, 2011, 02:58:34 PM Last edit: July 29, 2011, 09:51:20 PM by drgr33n |
|
Sorry to bump my thread but thought this was worth bumping !! LinuxCoin now has it's own debian repository. Now you can update your system without re downloading your ISO !! For now if you are running prefinal you can do the following. rm /etc/apt/sources.list nano /etc/apt/sources.list
and paste the following into that file deb http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb-src http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb http://www.linuxcoin.co.uk/apt sensi main
Save that file and continue with the following steps. apt-get update apt-get install bitcoin cgminer diablominer guiminer hashkill phoenix poclbm
|
|
|
|
mikeo
Full Member
Offline
Activity: 196
Merit: 100
Oikos.cash | Decentralized Finance on Tron
|
|
July 29, 2011, 06:04:16 PM |
|
Are you running Linuxcoin wirelessly? I'm looking for a robust wireless adapter, USB or PCI, that has built-in driver support in the Linuxcoin kernal. I'm a linux noob and want to avoid "driver hell". ;-)
I've looked at the "linux wireless adapters list" but give me your suggestions, please.
|
|
|
|
cyrusfox
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 29, 2011, 06:14:02 PM |
|
Are you running Linuxcoin wirelessly? I'm looking for a robust wireless adapter, USB or PCI, that has built-in driver support in the Linuxcoin kernal. I'm a linux noob and want to avoid "driver hell". ;-)
I've looked at the "linux wireless adapters list" but give me your suggestions, please.
Every card i have has worked instantly with linux coin with no driver problems. I have used both the Rosewill RNX-EasyN1 usb card and a pcie-x1 asus PCE-N13 card with no problems. Instantly recognized both respectively as Ralink 802.11 n WLAN and Ralink corp. RT2860. I think your safe with any wifi card, that's been my experience. Well implemented with every platform I have tried so far.
|
|
|
|
mikeo
Full Member
Offline
Activity: 196
Merit: 100
Oikos.cash | Decentralized Finance on Tron
|
|
July 29, 2011, 06:30:40 PM |
|
Thanks for the info.
|
|
|
|
EnzoMatrix
Newbie
Offline
Activity: 42
Merit: 0
|
|
July 29, 2011, 09:04:02 PM |
|
How hard would it be to setup linuxcoin to act as a internet gateway? I am wanting to install LinuxCoin on a older laptop that will simply be there to act as a internet connection and a PXE server for my actual mining rigs that way it can isolate the mining rigs from the outside world and I wont need a drive / cdrom / thumb drive for the mining rigs.
--Enzo
|
|
|
|
mikeo
Full Member
Offline
Activity: 196
Merit: 100
Oikos.cash | Decentralized Finance on Tron
|
|
July 29, 2011, 09:06:47 PM |
|
Sorry to bump my thread but thought this was worth bumping !! LinuxCoin now has it's own debian repository. Now you can update your system without re downloading your ISO !! For now if you are running prefinal you can do the following. rm /etc/apt/sources.list nano /etc/apt/sources.list
and paste the following into that file deb http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb-src http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb http://www.linuxcoin.co.uk/apt sensi main
Save that file and continue with the following steps. apt-get update apt-get upgrade apt-get install bitcoin cgminer diablominer guiminer hashkill phoenix poclbm
Did the above today -- took about 30 minutes to download, unpack and install it all. However, when I booted the updated, upgraded 0.2-final it got all the way to the final desktop and seemed to be running (I inserted another USB flash drive and the filemanager popped up) but my keyboard and mouse weren't seen. :-/
|
|
|
|
drgr33n (OP)
|
|
July 29, 2011, 09:50:57 PM Last edit: July 29, 2011, 10:01:29 PM by drgr33n |
|
How hard would it be to setup linuxcoin to act as a internet gateway? I am wanting to install LinuxCoin on a older laptop that will simply be there to act as a internet connection and a PXE server for my actual mining rigs that way it can isolate the mining rigs from the outside world and I wont need a drive / cdrom / thumb drive for the mining rigs.
--Enzo
Everythings included to do that checkout /opt/PXE. I have a video ready to upload talking you through it but here's a quick guide. cd over to /opt/PXE and open up globals.sh Set your parameters and make sure you enter a nameserver. most can stay as they are you jest want to worry about NET_NIC = internet facing network adapter SRV_NIC = adapter you want to run the server from NAMESERVERS = your nameserver. You can run nameserver.sh to get yours or use googles which is 8.8.8.8 save and close. next run pxe_menu.sh choose option 1 choose option 2 quit and your golden Plug your nodes into your switch and each computer will boot linuxcoin PXE and be ready to roll. Sorry to bump my thread but thought this was worth bumping !! LinuxCoin now has it's own debian repository. Now you can update your system without re downloading your ISO !! For now if you are running prefinal you can do the following. rm /etc/apt/sources.list nano /etc/apt/sources.list
and paste the following into that file deb http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb-src http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb http://www.linuxcoin.co.uk/apt sensi main
Save that file and continue with the following steps. apt-get update apt-get upgrade apt-get install bitcoin cgminer diablominer guiminer hashkill phoenix poclbm
Did the above today -- took about 30 minutes to download, unpack and install it all. However, when I booted the updated, upgraded 0.2-final it got all the way to the final desktop and seemed to be running (I inserted another USB flash drive and the filemanager popped up) but my keyboard and mouse weren't seen. :-/ Ops you've upgraded to the latest kernel aswell I forgot about them being in there. I'll fix that up tomorrow. Hold on two secs I'll upload some files for you to replace. EDIT: Go over and download the initrd and vmlinuz files here And replace the ones located in /live on your usb stick. next time you boot you will have full functionality again.
|
|
|
|
EnzoMatrix
Newbie
Offline
Activity: 42
Merit: 0
|
|
July 30, 2011, 12:06:08 AM |
|
Everythings included to do that checkout /opt/PXE. I have a video ready to upload talking you through it but here's a quick guide. cd over to /opt/PXE and open up globals.sh Set your parameters and make sure you enter a nameserver. most can stay as they are you jest want to worry about NET_NIC = internet facing network adapter SRV_NIC = adapter you want to run the server from NAMESERVERS = your nameserver. You can run nameserver.sh to get yours or use googles which is 8.8.8.8 save and close. next run pxe_menu.sh choose option 1 choose option 2 quit and your golden Plug your nodes into your switch and each computer will boot linuxcoin PXE and be ready to roll. How does persistence work with this type of setup for things like passwords and custom scripts timezone settings and this sort of thing?
|
|
|
|
mikeo
Full Member
Offline
Activity: 196
Merit: 100
Oikos.cash | Decentralized Finance on Tron
|
|
July 30, 2011, 01:02:59 AM |
|
Sorry to bump my thread but thought this was worth bumping !! LinuxCoin now has it's own debian repository. Now you can update your system without re downloading your ISO !! For now if you are running prefinal you can do the following. rm /etc/apt/sources.list nano /etc/apt/sources.list
and paste the following into that file deb http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb-src http://www.mirrorservice.org/sites/ftp.uk.debian.org/debian/ sid main non-free contrib deb http://www.linuxcoin.co.uk/apt sensi main
Save that file and continue with the following steps. apt-get update apt-get upgrade apt-get install bitcoin cgminer diablominer guiminer hashkill phoenix poclbm
Did the above today -- took about 30 minutes to download, unpack and install it all. However, when I booted the updated, upgraded 0.2-final it got all the way to the final desktop and seemed to be running (I inserted another USB flash drive and the filemanager popped up) but my keyboard and mouse weren't seen. :-/ Ops you've upgraded to the latest kernel aswell I forgot about them being in there. I'll fix that up tomorrow. Hold on two secs I'll upload some files for you to replace. EDIT: Go over and download the initrd and vmlinuz files here And replace the ones located in /live on your usb stick. next time you boot you will have full functionality again. [/quote] Nope, that didn't work. USB Keyboard and mouse still not seen.
|
|
|
|
|