PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[FloppyPurpleGherkin]

Is this miner still being developed? It appears the OP hasn't been online for nearly 3 months.. ?

[UnclWish]

For me PM starts to hang rigs... Increasing voltages didn't helps...
Other miners work stable.
Using latest AMD 20.9.2 drivers.
Bugs with hangs starts when DAG increases to 375+ size.

[Permonik]

Hmm, my vegas 64 doing 49Mh/s just fine with phoenix...

Some proof?

Some settings, wich bios?

Thank's!

2020.10.04:02:41:37.025: eths Eth: Share actual difficulty: 15.1 GH (!)
2020.10.04:02:41:37.049: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2020.10.04:02:41:37.049: eths Eth: Share accepted in 25 ms
2020.10.04:02:41:40.379: main Eth speed: 442.070 MH/s, shares: 21890/2/11, time: 57:01
2020.10.04:02:41:40.379: main GPUs: 1: 48.621 MH/s (2389) 2: 48.085 MH/s (2344) 3: 49.193 MH/s (2438) 4: 48.515 MH/s (2377) 5: 49.644 MH/s (2493) 6: 49.204 MH/s (2394) 7: 49.640 MH/s (2450) 8: 49.642 MH/s (2506/11) 9: 49.527 MH/s (2501)
2020.10.04:02:41:41.705: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

[batsonxl]

please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove.
Thank you everybody.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11

[Guigs321]

please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove.
Thank you everybody.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11

You need to "emulate" manually the rxboost option with the soft AMDTweakXL and put 30 to the REF parameter and maybe remove the -mt paramater if your tweak your vbios.

[Lukke]

Hi guys, there is an experimental mode in lolminer so you will be able to mine even with the 4GB cards for more than 2 months plus. Do you plan anything similar with Phoenix so I don't have to switch to lolminer on December? Thanks!

lolminer-v1.11 (Added experimental ZOMBIE mode for 4G AMD GPUs Fiji & Polaris. This allow continue mining Ethash above the 4G DAG size limit with some time memory trade of. This allows efficient ETH mining until ~February in Linux.

[Nanda Dewi277]

...
Mr Phoenix please improve miner like adding strap option.

How about reading the documentation? It is all there.

dont work on amd card

-mt options with error

Working just tried -mt 1 but not very good results 480 makin 29mhs and 570 making 25mhs. my total rig with claymore was 217mhs now with phoenix 199mhs.

My rigs are running 39Mh/s bro, and some are up to 43Mh/s. this makes me happy and optimizes my rig work. I think something's wrong in your settings or your bios.

[phucktum]

please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove.
Thank you everybody.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11

1) You should download the soft amdmemtweak(cli version). Put soft to the same miner folder and right-click at the application->properties->compatibility->click run as administrator.
2) put the command: "amdmemtweak.exe  -i 0,1,2,3,4,5,6 -ref 30"  under the command "setx GPU_SINGLE_ALLOC_PERCENT 100"
3) Otherwise you should lower cclock to 1140/1150 (for 570.8gb) or 1100 (for 4gb cards); cvddc lower to 830-875; mclock to 2025; mvddc to 810-830.

Hope you have desirable hashrate with low power.

[MostWanted]

Today 17 October 2020.

In Windows 10 4GB cards no more works on PhoenixMiner 5.1c 

Try to use another miner and write down here if success

[phucktum]

Today 17 October 2020.

In Windows 10 4GB cards no more works on PhoenixMiner 5.1c 

Try to use another miner and write down here if success

With linux, you'll mine etherium until Xmas day.
And with LoLminer in linux you may mine for more 3 years.

[MostWanted]

With linux, you'll mine etherium until Xmas day.
And with LoLminer in linux you may mine for more 3 years.

What about Windows? 

[Dark Oopa]

Today 17 October 2020.

In Windows 10 4GB cards no more works on PhoenixMiner 5.1c 

Try to use another miner and write down here if success

I have 2 rigs that works, I don't know why them and not the others...

[Jonet]

So the day has come. What is the best route to Linux? One of those builds you pay a monthly fee for? I can install a free distro but would probably need a step by step guide to get the rigs mining. Or I would need days....

[dmode90]

What about Windows? 

Works for me on W10 with latest Team Red Miner v0.7.14

[amfofo]

2 of my 4gb cards are 0 hash rate as of today. thats a 6gpu rig with 8gb in the 1st slot running in windows 10

[Mago6]

hi
my rx580 8gb stop mining ETC at #379 epoch (4GB DAG size) in win10 & PhoenixMiner 5.1c
but still work ETH at #368 epoch.
my driver is Crimson Beta for Blockchain.
i dont have any problem in linux but some rigs work in win10.
any suggestion?
 

[zeezoo]

hi
my rx580 8gb stop mining ETC at #379 epoch (4GB DAG size) in win10 & PhoenixMiner 5.1c
but still work ETH at #368 epoch.
my driver is Crimson Beta for Blockchain.
i dont have any problem in linux but some rigs work in win10.
any suggestion?
 

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.
Not so good drivers. These are versions 18.1.1 to 18.10.1 (inclusive), and from 19.8.1 to 19.12.1 (inclusive). This will allow you to mine until DAG epoch 365-366 and will require restart of PhoenixMiner on each DAG epoch change (for these drivers this will be preformed automatically unless you have added -dagrestart 0 command-line option to explicitly disable the auto-restart).

Your 8GB RX580 should be able to mine ETC without issues though, even with Blockchain drivers.

[Dowper_]

So the day has come. What is the best route to Linux? One of those builds you pay a monthly fee for? I can install a free distro but would probably need a step by step guide to get the rigs mining. Or I would need days....

I tried with Lubuntu but it crashed when I was installing the gpu drivers, so I tried HiveOS after that and it was very easy to set up everything.

[sxemini]

Today some gpu´s goes to 0 mh. But i don´t understand why. 12 Rigs with driver 19.7.4 and on 3 rigs one or 2 cards mining with 0 mh. All other rigs works perfect.

[NCarter84]

All my 4gb cards are still chugging along with Team Red Miner and 20.4.2