PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[FEKIH]

Why hashrate of GPU 4G now 22 Mh ?
Can I do any think to return 26 Mh

[waggy459]

You got to be kidding! With 4Gb you can mine ETC and some obscure coins that are normally not profitable. At the moment ETH is about 2,5 times more profitable than ETC. And most 4GB cars still mine ETH. What do think happens to ETC profitability when no one is able to run their 4GB cards on ETH?

I don't think the part in bold is accurate.  ETC by my looking at it is same or maybe just a few % more profitable than ETH.

[Cryptomining2003]

Why hashrate of GPU 4G now 22 Mh ?
Can I do any think to return 26 Mh

omg....read some pages pls....


as there are already videos that show SAM mode of the new amd 6800 cards that load the dag twice and mine with 2 instances per card....i need to ask again if it would be possible to load the now very small sized etc dag file 2 or 3 times into a 8gb card to boost performance?

[batsonxl]

Why hashrate of GPU 4G now 22 Mh ?
Can I do any think to return 26 Mh

omg....read some pages pls....


as there are already videos that show SAM mode of the new amd 6800 cards that load the dag twice and mine with 2 instances per card....i need to ask again if it would be possible to load the now very small sized etc dag file 2 or 3 times into a 8gb card to boost performance?

Try clkernel 3 on polaris cards
Tell us results. good luck

[sreetglide2011]

Windows 10 please....

also could be bad gpu or risers

ok,.. i'll try to update to win10

after 6 more hours make update to win10.. (i can't sleep.. here 4:54AM now)  
used AMD Driver 12.4.2 >>> i can see my GPU all work in device manager  
patch by 'atikmdag-patcher-1.4.7'
switch to compute mode by 'AMD-Compute-Switcher'


but,...
using Phoenix miner 5.2e and 5.3b still same, hashrate still not change like before..

here is the result:

https://i.postimg.cc/sX80gWyS/updateresult.jpg

any suggestion to make RX480 back to 30Mhs..?
thanks

The driver you are trying to use is wayyyyyyy soooooo old.

Try 20.4.2

[ivomm]

You got to be kidding! With 4Gb you can mine ETC and some obscure coins that are normally not profitable. At the moment ETH is about 2,5 times more profitable than ETC. And most 4GB cars still mine ETH. What do think happens to ETC profitability when no one is able to run their 4GB cards on ETH?

I don't think the part in bold is accurate.  ETC by my looking at it is same or maybe just a few % more profitable than ETH.

And I don't think you know how to check the current profitability. You are looking on default 24h whattomine. I wonder how many "miners" don't know there is the current profitability option. Probably a lot, since the profit now is 2.5 times less for ETC and the projection is to fall more for the next 24 hours. And obviously they believe they will get profits equal to mining ETH. LOL Not gonna happen unless they switch off their 3gb cards or move to another coin. The hashrate today increased from 3.7 Th to 6.3 and then decreased to 5.6 Th. Well, at least some know about the current profitability option... but not all obviously  

[hintegerha]

5.3b contains a virus ? All scanners report this !!!

[hintegerha]

5.3b contains a virus ? All scanners report this !!!

no, it's miner 

5.1c is the one I'm currently using and there no scanner reported an issue. Unfortunately I have to upgrade due to the hard fork of ETC :-( Will switch to  a different miner probably.....

[bit-sokol]

Claymore has always been flagged as a virus, Gminer too. - 90% of all miners are marked as viruses because they do not have digital signatures ..

[batsonxl]

You got to be kidding! With 4Gb you can mine ETC and some obscure coins that are normally not profitable. At the moment ETH is about 2,5 times more profitable than ETC. And most 4GB cars still mine ETH. What do think happens to ETC profitability when no one is able to run their 4GB cards on ETH?

I don't think the part in bold is accurate.  ETC by my looking at it is same or maybe just a few % more profitable than ETH.

And I don't think you know how to check the current profitability. You are looking on default 24h whattomine. I wonder how many "miners" don't know there is the current profitability option. Probably a lot, since the profit now is 2.5 times less for ETC and the projection is to fall more for the next 24 hours. And obviously they believe they will get profits equal to mining ETH. LOL Not gonna happen unless they switch off their 3gb cards or move to another coin. The hashrate today increased from 3.7 Th to 6.3 and then decreased to 5.6 Th. Well, at least some know about the current profitability option... but not all obviously  

im not expert but i made test. i mined new ETChash for 4 hours and old ETH, results are very close, ETC made in 4hours 1.25$ and ETH made me 1.30$,
so i dont think 2.5 times less. it very close.

[Tango-19]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

[samurai1907]

Hi, i am using claymore miner , but it looks like i cant use it even for 8gb cards,developer seems died,  i want to use phoenix miner,
best thing about claymore is -straps command for my cards, does phoenix miner has it for amd rx470&570 cards,

Is there any way use claymore's straps cuz i dont want to flash my cards, every time i do that , i had crashes

[miner29]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

Did you to go down on core and up on memory?

On linux i use -400/+600...for windows double those.  I get 23-24mhs per card limit to 80watts max.

[Tango-19]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

Did you to go down on core and up on memory?

On linux i use -400/+600...for windows double those.  I get 23-24mhs per card limit to 80watts max.

no idea. I just started it after putting the info into the bin file under start_miner. Also I wasnt sure if this thread was active my b. I cant delete my topics as well weird. I run windows 10 with a stock settings on my 1060 does it make a huge difference with overclocking and undervolting? Are you refering to the in app GPU tuning parameter in PhoenixMiner?

[miner29]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

Did you to go down on core and up on memory?

On linux i use -400/+600...for windows double those.  I get 23-24mhs per card limit to 80watts max.

no idea. I just started it after putting the info into the bin file under start_miner. Also I wasnt sure if this thread was active my b. I cant delete my topics as well weird. I run windows 10 with a stock settings on my 1060 does it make a huge difference with overclocking and undervolting? Are you refering to the in app GPU tuning parameter in PhoenixMiner?

afterburner is software that should let you adjust your core / memory / power level

https://www.msi.com/page/Afterburner

[Tango-19]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

Did you to go down on core and up on memory?

On linux i use -400/+600...for windows double those.  I get 23-24mhs per card limit to 80watts max.

no idea. I just started it after putting the info into the bin file under start_miner. Also I wasnt sure if this thread was active my b. I cant delete my topics as well weird. I run windows 10 with a stock settings on my 1060 does it make a huge difference with overclocking and undervolting? Are you refering to the in app GPU tuning parameter in PhoenixMiner?

afterburner is software that should let you adjust your core / memory / power level

https://www.msi.com/page/Afterburner

thank you. on my pool's website it says the reported hashrate has stopped at 0 what do i do?

[batsonxl]

Who can help please tell me someone how to fix this error: it happens after 20hours mining.

Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.

after that somtime miner not even able connect to pool until i make restart the rig. after that works all good Devfee also works. after 20hours mining again same thing. Please help good people.

[batsonxl]

@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.

Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.

[ArtfromFL]

After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and  "wdog Thread(s) not responding. Restarting."
But nothing happens.

I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.

RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../xxx@gmail.com -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1

Any idea or assistance is appreciated.
thanks

[miner29]

hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.

Did you to go down on core and up on memory?

On linux i use -400/+600...for windows double those.  I get 23-24mhs per card limit to 80watts max.

no idea. I just started it after putting the info into the bin file under start_miner. Also I wasnt sure if this thread was active my b. I cant delete my topics as well weird. I run windows 10 with a stock settings on my 1060 does it make a huge difference with overclocking and undervolting? Are you refering to the in app GPU tuning parameter in PhoenixMiner?

afterburner is software that should let you adjust your core / memory / power level

https://www.msi.com/page/Afterburner

thank you. on my pool's website it says the reported hashrate has stopped at 0 what do i do?

If the miner is showing 0 then you may have to try higher core and lower memory oc settings.  move core up and memory down 50 - 100 at a time until it stays mining.  Watch the temp on your card.   Max safe for nvidia is 80c...i prefer to be 60c.