Narcisse
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2017, 06:11:27 PM |
|
Total noob question. How does one update Cgminer in an Antminer S5? IMs appreciated, Im still learning so dont bash me too bad.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4228
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2017, 09:00:10 PM |
|
Total noob question. How does one update Cgminer in an Antminer S5? IMs appreciated, Im still learning so dont bash me too bad.
The cgminer in an antminer S5 is usually precompiled in firmware provided by bitmain and is based on an old forked version of cgminer. It is not supported by the official cgminer version and would be far from trivial to be supported and build a binary for the embedded controller of the S5. In short you cannot build the latest cgminer for S5. I built a temporary binary for the S5 a while ago which you can copy to the S5 here: http://ck.kolivas.org/apps/cgminer/antminer/s5/But it does not stay on the device across reboots and is based on 4.9.0 code. If you are not having trouble with your S5 there is little to gain by updating the software anyway, accepting the shortcomings of the forked older version from bitmain. Except in the case of mining on p2pool (which I recommend against with any antminer because of their code problems), most of the issues with their version of cgminer are not showstoppers.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
mokahless
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2017, 02:37:09 AM |
|
I'm currently having an issue with Ubuntu and the latest version of CGminer. I'm attempting to compile it and got the error to install libusb-1.0. So I installed libusb-1.0 ||/ Name Version Architecture Description +++-==============-============-============-================================= ii libusb-0.1-4:a 2:0.1.12-28 amd64 userspace USB programming library ii libusb-1.0-0:a 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-0-d 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-0-d 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-doc 2:1.0.20-1 all documentation for userspace USB p un libusb-dev <none> <none> (no description available) un libusbmuxd-too <none> <none> (no description available) ii libusbmuxd4:am 1.0.10-2ubun amd64 USB multiplexor daemon for iPhone
So I tried compiling again but got the same error: checking for LIBUSB... no configure: error: Could not find usb library - please install libusb-1.0
Anyone have an idea?
|
|
|
|
o_solo_miner
Legendary
Offline
Activity: 2482
Merit: 1481
-> morgen, ist heute, schon gestern <-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2017, 10:29:28 AM |
|
I'm currently having an issue with Ubuntu and the latest version of CGminer. I'm attempting to compile it and got the error to install libusb-1.0. So I installed libusb-1.0 ||/ Name Version Architecture Description +++-==============-============-============-================================= ii libusb-0.1-4:a 2:0.1.12-28 amd64 userspace USB programming library ii libusb-1.0-0:a 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-0-d 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-0-d 2:1.0.20-1 amd64 userspace USB programming library ii libusb-1.0-doc 2:1.0.20-1 all documentation for userspace USB p un libusb-dev <none> <none> (no description available) un libusbmuxd-too <none> <none> (no description available) ii libusbmuxd4:am 1.0.10-2ubun amd64 USB multiplexor daemon for iPhone
So I tried compiling again but got the same error: checking for LIBUSB... no configure: error: Could not find usb library - please install libusb-1.0
Anyone have an idea? libudev-dev is missing as far as I can see..
|
from the creator of CGMiner http://solo.ckpool.org for Solominers paused: passthrough for solo.ckpool.org => stratum+tcp://rfpool.org:3334
|
|
|
sir.humus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2017, 05:10:35 PM |
|
Is there a way to use CGMiner on a ZedBoard with Zynq FPGA+ARM? I have the hardware and really want to start mining. can you give me a hint where to start?
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4228
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2017, 08:15:35 PM |
|
Is there a way to use CGMiner on a ZedBoard with Zynq FPGA+ARM?
No. You'd have to write your own driver for it.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
2112
Legendary
Offline
Activity: 2128
Merit: 1073
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2017, 09:17:40 PM |
|
Is there a way to use CGMiner on a ZedBoard with Zynq FPGA+ARM? I have the hardware and really want to start mining. can you give me a hint where to start?
The introductory project and code is in the official Xilinx marketing materials "Xcell journal" from 3rd quarter of 2013. http://www.xilinx.com/publications/archives/xcell/Xcell84.pdfObviously, this was over 3 years ago, it is now competitively obsolete. But it is a good educational starting point for porting the modern mining code. https://bitcointalk.org/index.php?topic=262195.0
|
|
|
|
splat44
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 12, 2017, 08:49:15 PM |
|
This is in relation to version 4.9.2
Does version support gridseed 80 chips blades miner? I see nothing on readme! That hardware support scrypt
I hope that version support scrypt and that miner hardware!
I need know the following setting in command line: 1) enable scrypt 2) auto detect gridseed 80 chips blades and as well other related settings I need providing 3) Pool information
Will be great receiving code containing the above!
If latest version support the above let me know as well!
|
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 12, 2017, 11:04:14 PM |
|
CGMiner is for Bitcoin only. It doesn't support altcoins. Although some use it to mine sha256 altcoins, it's still not supported.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 02:17:38 AM Last edit: March 13, 2017, 02:46:13 AM by toptek |
|
16.10 Ubuntu only ? i have it running on a RPI 3 controlling my A6 using Minera as the GUI on ubuntu 16.4.02. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) .... and can use it with any of my PI types that run Ubuntu 16.4 with minera 7.0 not the beta version but can use it with the Minera beta version and have ..sense it came out in Jan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ...CGMINER 4.10.0
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 02:40:21 AM |
|
This is in relation to version 4.9.2
Does version support gridseed 80 chips blades miner? I see nothing on readme! That hardware support scrypt
I hope that version support scrypt and that miner hardware!
I need know the following setting in command line: 1) enable scrypt 2) auto detect gridseed 80 chips blades and as well other related settings I need providing 3) Pool information
Will be great receiving code containing the above!
If latest version support the above let me know as well!
like he said CGMINER in it present state only does SHA256 coins with no support offered for ALt coins or any kind of Script coins beyond your version but you can mine SHa256 alt coins with CGMNIER even this version with out issue i do it all the time, but I use it mostly to mine BTC ,, I'm being nice SO, don't ask for support here for alt coins, you more then likely won't get any support for any kind of alt coins here and told you won't in worse words then mine . just a heads up before you try to push the Issue ....
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 05:49:22 PM |
|
It appears that with v4.10.0, cgminer no longer runs on WinXP machines, is this correct? I realize that XP is old and outdated and not supported by most stuff any more, but I just wanted to be sure, thanks.
|
|
|
|
angkasaz
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 116
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2017, 12:37:12 PM |
|
thanks for the software, its a bit complicated tho for me xD
|
|
|
|
tuaris
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 27, 2017, 02:11:49 AM |
|
I'm trying to build on BSD but I'm getting the following error: cc -O2 -pipe -Wall -march=native -fstack-protector -fno-strict-aliasing -fstack-protector -o cgminer cgminer-cgminer.o cgminer-util.o cgminer-sha2.o cgminer-api.o cgminer-logging.o cgminer-klist.o cgminer-noncedup.o cgminer-usbutils.o cgminer-driver-bitmain.o -L/usr/local/lib -lcurl -ljansson -lpthread -lusb -lm lib/libgnu.a ccan/libccan.a -lncurses -lpthread cgminer-cgminer.o:(.data+0x468): undefined reference to `opt_bitmain_auto' cgminer-cgminer.o:(.data+0x4a0): undefined reference to `opt_bitmain_overheat' cgminer-cgminer.o:(.data+0x4c8): undefined reference to `set_bitmain_fan' cgminer-cgminer.o:(.data+0x548): undefined reference to `opt_bitmain_hwerror' cgminer-cgminer.o:(.data+0x5b8): undefined reference to `opt_bitmain_temp' cgminer-cgminer.o:(.data+0x5f0): undefined reference to `opt_bitmain_workdelay' cgminer-cgminer.o:(.data+0x660): undefined reference to `opt_bitmain_beeper' cgminer-cgminer.o:(.data+0x698): undefined reference to `opt_bitmain_checkall' cgminer-cgminer.o:(.data+0x6d0): undefined reference to `opt_bitmain_checkn2diff' cgminer-cgminer.o:(.data+0x708): undefined reference to `opt_bitmain_tempoverctrl'
|
|
|
|
kenesu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 27, 2017, 02:33:07 PM |
|
hi guys! sorry for being noob for this one, Im not too particular with the jargons so im going to ask it directly. >Do I need other hardware? or just my laptop is good? >Do i need to be good in programming to work this one? >do i need to invest to work this? I really aprreciate if someone answer this on details. Sorry again for being noob ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
etherparty
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 29, 2017, 06:19:31 AM |
|
hi guys! sorry for being noob for this one, Im not too particular with the jargons so im going to ask it directly. >Do I need other hardware? or just my laptop is good? >Do i need to be good in programming to work this one? >do i need to invest to work this? I really aprreciate if someone answer this on details. Sorry again for being noob ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) 1. Yes ideally you would use ASIC miners for Bitcoin or gaming GPUs for other alts. 2. You don't need to be a programmer but you need to know how to install things on your PC and how to run software via command line. 3. Unless you have ASIC miners or GPUs already yes you will have to spend some money to get yourself some mining hardware.
|
|
|
|
kenesu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2017, 04:14:03 AM |
|
hi guys! sorry for being noob for this one, Im not too particular with the jargons so im going to ask it directly. >Do I need other hardware? or just my laptop is good? >Do i need to be good in programming to work this one? >do i need to invest to work this? I really aprreciate if someone answer this on details. Sorry again for being noob ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) 1. Yes ideally you would use ASIC miners for Bitcoin or gaming GPUs for other alts. 2. You don't need to be a programmer but you need to know how to install things on your PC and how to run software via command line. 3. Unless you have ASIC miners or GPUs already yes you will have to spend some money to get yourself some mining hardware. Thank you so much at least this help me to understand this ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
smartybones
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2017, 08:58:25 PM |
|
Hi there.
I have been learning bitcoin mining for the last few weeks now. I picked up some kit cheap and have been playing around with it. I have no problem setting up and running an antminer u2 and its hashing away happy as Larry. My plan is to biuld up over time a large mining rig, but I have got to learn on the cheap obsolete kit first.
I have got hold of half a dozen gridseed blades. just the bare boards, I have knocked together some heatsinks and fans to keep them cool. The boards run fine on a windows binary with gridseed drivers I downloaded, but I want to get it working on a raspberry pi3.
I have no problem compileing from sourcecode on my raspberry pi, but what I am having with is compiling with the gridseed drivers. I copied the driver-gridseed.c and driver-gridseed.h over the the cgmineer directory and run sudo ./configure --enable-gridseed but when make the binary it has a moan about a lack of driver "configure: error: No mining devices configured in"
I am assuming I need to add a reference to driver-gridseed.c and driver-gridseed.h elsewhere in the sourcecode....
can anyone point me in the right direction to the files I need to edit?
Marty.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4228
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2017, 09:02:00 PM |
|
I have got hold of half a dozen gridseed blades. just the bare boards, I have knocked together some heatsinks and fans to keep them cool. The boards run fine on a windows binary with gridseed drivers I downloaded, but I want to get it working on a raspberry pi3.
I have no problem compileing from sourcecode on my raspberry pi, but what I am having with is compiling with the gridseed drivers. I copied the driver-gridseed.c and driver-gridseed.h over the the cgmineer directory and run sudo ./configure --enable-gridseed but when make the binary it has a moan about a lack of driver "configure: error: No mining devices configured in"
I am assuming I need to add a reference to driver-gridseed.c and driver-gridseed.h elsewhere in the sourcecode....
can anyone point me in the right direction to the files I need to edit?
Unfortunately there is no gridseed code nor support in the official cgminer, it being primarily an altcoin mining device. You'll need to seek help from whoever maintains a fork of cgminer with gridseed support.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
smartybones
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2017, 09:12:22 PM |
|
Unfortunately there is no gridseed code nor support in the official cgminer, it being primarily an altcoin mining device. You'll need to seek help from whoever maintains a fork of cgminer with gridseed support.
Thanks for the prompt reply. time to search for a fork, Marty.
|
|
|
|
|