SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[viljy]

Work fine 1.8.9. Checked with profiles settings, got a speed increase of ~5.5% on standard VBIOS. A little, but nice.

[doktor83]

I removed the --preparedata and is working.
But I do not see any significant gain other than getting the same hashrate as with old_mode: true on 1.8.8, without it 1.8.8 was slower for me.

Also CPU utilization went up and since I am mining with CPU lost 600 h/s

- 1.8.8: hash 175K with old_mode true
- 1.8.9: hash 175k without old_mode and tweaks 1-8 and no preparedata at command line

So the small gain 100/200 h/s is canceled by higher CPU usage which cost 600 h/s

my card RX580 8Gb bios modded are at CC 1200/940 MC 1950/900

I fixed this issue and re-uploaded 189, so you can download it again and use old_mode + preparedata together.

Work fine 1.8.9. Checked with profiles settings, got a speed increase of ~5.5% on standard VBIOS. A little, but nice.

Algos with small scratchpad size like upx2, turtle have the least benefit from tweaking profiles on RX, if you look at it in %.
Others should be there about 3-5%, depending how good is the strap in the modded vbios.
I don't understand why are you still on stock vbios

[psthoy]

Will try this out tomorrow --

Currently running 1.8.3 mining bittube

[2019-05-24 23:54:55] GPU0 :    962 H/s [T: 68c, RPM: 1106, CC: 1250 MHz, MC: 2000 MHz][BUS:11]
[2019-05-24 23:54:55] GPU1 :    962 H/s [T: 63c, RPM: 956, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2019-05-24 23:54:55] GPU2 :    1204 H/s [T: 74c, RPM: 1172, CC: 1250 MHz, MC: 2000 MHz][BUS:13]
[2019-05-24 23:54:55] Total:    3128 H/s

Hoping to get more juice out of it!  Keep you posted!

[ganzocrypt]

I removed the --preparedata and is working.
But I do not see any significant gain other than getting the same hashrate as with old_mode: true on 1.8.8, without it 1.8.8 was slower for me.

Also CPU utilization went up and since I am mining with CPU lost 600 h/s

- 1.8.8: hash 175K with old_mode true
- 1.8.9: hash 175k without old_mode and tweaks 1-8 and no preparedata at command line

So the small gain 100/200 h/s is canceled by higher CPU usage which cost 600 h/s

my card RX580 8Gb bios modded are at CC 1200/940 MC 1950/900

I fixed this issue and re-uploaded 189, so you can download it again and use old_mode + preparedata together.

Work fine 1.8.9. Checked with profiles settings, got a speed increase of ~5.5% on standard VBIOS. A little, but nice.

Algos with small scratchpad size like upx2, turtle have the least benefit from tweaking profiles on RX, if you look at it in %.
Others should be there about 3-5%, depending how good is the strap in the modded vbios.
I don't understand why are you still on stock vbios

Looks like with old mode and preparedata I am back at same GPU and CPU hashrate as before, so no loss CPU % and hashrate
Will play a bit with tweak as you mentioned

thx

[cas333]

Great work,doktor!  
A good increase of 3-5% which is fine.
Thanks for your dedications!

[roket7]

Пoдcкaжитe ктo нe бyдь,чтo зa aлгopитм cryptonight-superfast? ecть ли oн в SRBminere?

[abg00]

Пoдcкaжитe ктo нe бyдь,чтo зa aлгopитм cryptonight-superfast? ecть ли oн в SRBminere?

what coin? its english topic

кaкaя мoнeтa. пиши пo-aнглийcки, тoпикcтapтep pyccкий нe знaeт

[Bllacky]

Version 1.8.9 eventually crashes for me and ends up spitting only this :

[2019-05-26 10:25:49] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:26:33] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0ba9ffa8e70537e99fa7db36c5a4dde2f1ad1294fc7d53e17e50f1130701247f4ca8b9d5485c0 0000000799dc1c161b7d129985fd562330eefce621530ea39965683170a3fb3d6ca822503","job_id":"207536794639743","target":"8b4f0100","height":1842901}}
[2019-05-26 10:26:34] json_send[202]: {"id":139,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"011f6900","result":"5209d27598e2285070b5aee1b0916b1b27bc7c62e6d4789cc6ea379d93870000"}}
[2019-05-26 10:26:34] json_receive[73]: {"id":139,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:26:34] miner_result: Too many invalid job errors, connecting to next pool
[2019-05-26 10:27:05] json_send[202]: {"id":140,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"dd516900","result":"a64fbb05010809a06e1a0118e1ef2b4d76f0cc9b84de6ac7c3b00acddf230100"}}
[2019-05-26 10:27:05] json_receive[73]: {"id":140,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:27:05] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:28:01] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8180a9e7051daf5d91e61e074a63cc188ad34c8fb189808534be9ebf12df1eae1a6808b70a0 000000028740b2df6004a6e509c6d581f1ce5ac18dcc37e572128cb7320e20ae40dc79d17","job_id":"339747801201164","target":"8b4f0100","height":1842902}}
[2019-05-26 10:28:11] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8b80a9e705799ce479fc0c098816a99ebec48a2acdd9de1a0e28e802ae04492f11de4e80760 00000007c98b47f59706fe070a0d7c21e09a47b9c25efde346b48f3ab3cb40c373469e702","job_id":"635405887252134","target":"8b4f0100","height":1842903}}

[doktor83]

Version 1.8.9 eventually crashes for me and ends up spitting only this :

[2019-05-26 10:25:49] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:26:33] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0ba9ffa8e70537e99fa7db36c5a4dde2f1ad1294fc7d53e17e50f1130701247f4ca8b9d5485c0 0000000799dc1c161b7d129985fd562330eefce621530ea39965683170a3fb3d6ca822503","job_id":"207536794639743","target":"8b4f0100","height":1842901}}
[2019-05-26 10:26:34] json_send[202]: {"id":139,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"011f6900","result":"5209d27598e2285070b5aee1b0916b1b27bc7c62e6d4789cc6ea379d93870000"}}
[2019-05-26 10:26:34] json_receive[73]: {"id":139,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:26:34] miner_result: Too many invalid job errors, connecting to next pool
[2019-05-26 10:27:05] json_send[202]: {"id":140,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"dd516900","result":"a64fbb05010809a06e1a0118e1ef2b4d76f0cc9b84de6ac7c3b00acddf230100"}}
[2019-05-26 10:27:05] json_receive[73]: {"id":140,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:27:05] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:28:01] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8180a9e7051daf5d91e61e074a63cc188ad34c8fb189808534be9ebf12df1eae1a6808b70a0 000000028740b2df6004a6e509c6d581f1ce5ac18dcc37e572128cb7320e20ae40dc79d17","job_id":"339747801201164","target":"8b4f0100","height":1842902}}
[2019-05-26 10:28:11] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8b80a9e705799ce479fc0c098816a99ebec48a2acdd9de1a0e28e802ae04492f11de4e80760 00000007c98b47f59706fe070a0d7c21e09a47b9c25efde346b48f3ab3cb40c373469e702","job_id":"635405887252134","target":"8b4f0100","height":1842903}}

Can you please add --extendedlog to start.bat, and if this happens again send me the whole log file.

[swongsR1thing]

Paging doktor83, please help  
I struggle with 1.8.8 on my vega56 rig.
https://i.ibb.co/zWdbLwt/Screen-Shot-2019-05-26-at-1-43-10-PM.png

I have a decent hr on cn pico (turtle) but cnR i have horrible and unstable.
Should i raise core clock? Mem clock is pretty much at max (hynix memory) and it can't get over 910.
What are optimal settings for vega56 on cnr?

[roket7]

Пoдcкaжитe ктo нe бyдь,чтo зa aлгopитм cryptonight-superfast? ecть ли oн в SRBminere?

what coin? its english topic

кaкaя мoнeтa. пиши пo-aнглийcки, тoпикcтapтep pyccкий нe знaeт

Furycoin,here is this coin,on algorithm SuperFast

[doktor83]

Пoдcкaжитe ктo нe бyдь,чтo зa aлгopитм cryptonight-superfast? ecть ли oн в SRBminere?

what coin? its english topic

кaкaя мoнeтa. пиши пo-aнглийcки, тoпикcтapтep pyccкий нe знaeт

Furycoin,here is this coin,on algorithm SuperFast

"cryptonight_type" : "cryptonight_superfast"
or
"cryptonight_type" : "swap"

I have a decent hr on cn pico (turtle) but cnR i have horrible and unstable.
Should i raise core clock? Mem clock is pretty much at max (hynix memory) and it can't get over 910.
What are optimal settings for vega56 on cnr?

Driver version you use ?
Also how does your config looks like?
What hashrate do you get on CN/R ?

[swongsR1thing]

I use 18.6.1.
CC: 1407 MHz
MC: 900 MHz (hynix memory - very unstable over ~910 on cn7, cn8)
HR cn pico turtle = ~14880 H/s

Code:

{	
"cryptonight_type" : "turtle",	
"intensity" : 0,	
"double_threads" : true,	
"shutdown_temperature" : 77,	
"off_temperature" : 77	
}

[doktor83]

I use 18.6.1.
CC: 1407 MHz
MC: 900 MHz (hynix memory - very unstable over ~910 on cn7, cn8)
HR cn pico turtle = ~14880 H/s

Code:

{	
"cryptonight_type" : "turtle",	
"intensity" : 0,	
"double_threads" : true,	
"shutdown_temperature" : 77,	
"off_temperature" : 77	
}

No, i mean't on Cn/r , you said you have problems on CN/r

[swongsR1thing]

Code:

{	
"cryptonight_type" : "normalv4",	
"intensity" : 161,
"worksize" : 16,	
"double_threads" : true,	
"shutdown_temperature" : 77,	
"off_temperature" : 77	
}

This is with 18.8.8

[Amgine]

Dok, how to disable the "Precompiling program"?
GPU can crash after a certain times of  these "Precompiling program" and hashrate dropped (as if it didn't load the tweak profile) after the Precompiling Program.

[doktor83]

Code:

{	
"cryptonight_type" : "normalv4",	
"intensity" : 161,
"worksize" : 16,	
"double_threads" : true,	
"shutdown_temperature" : 77,	
"off_temperature" : 77	
}

This is with 18.8.8

Try intensity 112

Dok, how to disable the "Precompiling program"?
GPU can crash after a certain times of  these "Precompiling program" and hashrate dropped (as if it didn't load the tweak profile) after the Precompiling Program.

You can't that is how CN/R works.

[swongsR1thing]

Ok, it has been running. I didn't do much, i downloaded 18.8.9. version and used guided setup. Then i just started the bat file. I don't even have setclock.bat or any other scripts running.
I used to have overdriventool.ini in the same folder and .bat file would execute clock speeds and settings from .ini file.
In this scenario i only have 18.8.9. and ran the miner and applied + for a step 1 tweak.
It does 1818 H/s at 1407cc and 900mc.

Should i put overdriventool in the folder or i just keep it running as it is?

[vitik]

v1.8.9
win10x64
reboot_script_min_rig_speed - not working

[MingMining]

some weird result on 1.8.8



GPU0: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 1]
GPU1: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 30]
GPU2: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 31]
GPU3: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 34]
GPU4: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 35]
GPU5: Radeon RX 570 Series [ellesmere] [4096 MB][I: 59.0][W: 16][T: 2][F: 8][BUS: 38]

--------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.8
DevFee ~0.85%

Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
--------------------------------------------------------------------------------------

Recommended drivers     : Adrenalin 18.6.1 or Adrenalin 2019
Algorithm               : Cryptonight V4 (R)
Algo switching          : enabled
Coin forking            : enabled
Gpu watchdog            : enabled [normal mode]
Startup monitor         : enabled
Tweaking                : disabled


[2019-05-27 19:43:41] Pools defined -> 2
[2019-05-27 19:43:41] Please run miner as administrator to enable tweaking
[2019-05-27 19:43:42] Compiling [normalv4] kernel for DEVICE BUS_ID[1]
[2019-05-27 19:43:46] Loading [normalv4] kernel for DEVICE BUS_ID[1]
[2019-05-27 19:43:46] Loading [normalv4] kernel for DEVICE BUS_ID[30]
[2019-05-27 19:43:46] Loading [normalv4] kernel for DEVICE BUS_ID[30]
[2019-05-27 19:43:47] Loading [normalv4] kernel for DEVICE BUS_ID[31]
[2019-05-27 19:43:47] Loading [normalv4] kernel for DEVICE BUS_ID[31]
[2019-05-27 19:43:48] Loading [normalv4] kernel for DEVICE BUS_ID[34]
[2019-05-27 19:43:48] Loading [normalv4] kernel for DEVICE BUS_ID[34]
[2019-05-27 19:43:49] Loading [normalv4] kernel for DEVICE BUS_ID[35]
[2019-05-27 19:43:49] Loading [normalv4] kernel for DEVICE BUS_ID[35]
[2019-05-27 19:43:50] Loading [normalv4] kernel for DEVICE BUS_ID[38]
[2019-05-27 19:43:50] Loading [normalv4] kernel for DEVICE BUS_ID[38]
[2019-05-27 19:43:50] ADL initialised successfully
[2019-05-27 19:43:51] Connected to pool.supportxmr.com:7777
[2019-05-27 19:43:51] Pool difficulty: 40000
[2019-05-27 19:43:51] Pool sent a new job, block height 1844209 [ID: Qmj+TM6O22XoHgb5LSYc1TqLJrQm] [normalv4]
[2019-05-27 19:43:51] Precompiling program [BUS:1]
[2019-05-27 19:44:04] Pool sent a new job, block height 1844210 [ID: PLArP+CMDHmAblPA0AoEGE9AGIu0] [normalv4]
[2019-05-27 19:44:05] Finished program precompilation [BUS:1]
[2019-05-27 19:44:05] Precompiling program [BUS:30]
[2019-05-27 19:44:20] Finished program precompilation [BUS:30]
[2019-05-27 19:44:20] Precompiling program [BUS:34]
[2019-05-27 19:44:29] Pool difficulty: 40001
[2019-05-27 19:44:29] GPU1[BUS:30] result rejected for job[2] [low difficulty share]
[2019-05-27 19:44:35] Finished program precompilation [BUS:34]
[2019-05-27 19:44:35] Precompiling program [BUS:31]
[2019-05-27 19:44:50] Finished program precompilation [BUS:31]
[2019-05-27 19:44:50] Precompiling program [BUS:38]
[2019-05-27 19:44:55] GPU0[BUS:1] result rejected for job[2] [low difficulty share]
[2019-05-27 19:45:01] GPU3[BUS:34] result rejected for job[2] [low difficulty share]
[2019-05-27 19:45:04] Finished program precompilation [BUS:38]
[2019-05-27 19:45:04] Precompiling program [BUS:35]
[2019-05-27 19:45:08] GPU3[BUS:34] result rejected for job[2] [invalid job id]
[2019-05-27 19:45:14] GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-27 19:45:16] GPU1[BUS:30] result rejected for job[2] [invalid job id]
[2019-05-27 19:45:19] Finished program precompilation [BUS:35]
[2019-05-27 19:45:19] Pool sent a new job, block height 1844210 [ID: uSxHgoDQ+6OTzv8/aSVByu4u+Ek/] [normalv4]
[2019-05-27 19:45:19] Pool difficulty: 21622
[2019-05-27 19:46:06] Pool difficulty: 21621
[2019-05-27 19:46:06] Pool sent a new job, block height 1844212 [ID: geRjmtGOjG9dU+3htvcv68e88nvQ] [normalv4]
[2019-05-27 19:46:06] GPU4[BUS:35] result rejected for job[11] [low difficulty share]
[2019-05-27 19:46:11] Pool difficulty: 21622
[2019-05-27 19:46:11] Pool sent a new job, block height 1844212 [ID: OP1sZcF7d35n33QkX7XBrBke8tC8] [normalv4]
[2019-05-27 19:46:12] GPU2[BUS:31] result rejected for job[12] [low difficulty share]
[2019-05-27 19:46:12] Pool difficulty: 14415
[2019-05-27 19:46:14] GPU1[BUS:30] result rejected for job[12] [low difficulty share]
[2019-05-27 19:46:16] GPU0[BUS:1] result rejected for job[12] [low difficulty share]
[2019-05-27 19:46:18] Pool sent a new job, block height 1844212 [ID: WcNRYrKmgUF15IT9/zk6QuhPQiyS] [normalv4]
[2019-05-27 19:46:18] GPU1[BUS:30] result rejected for job[13] [low difficulty share]
[2019-05-27 19:46:18] Pool difficulty: 14414
[2019-05-27 19:46:22] Pool sent a new job, block height 1844212 [ID: 1JeUETe3pNhJeBG0tCPMF6QKPbel] [normalv4]
[2019-05-27 19:46:25] Pool sent a new job, block height 1844212 [ID: oTPhwy4OxZveAUZqJ/LRkO6YHDhp] [normalv4]
[2019-05-27 19:46:29] Pool sent a new job, block height 1844212 [ID: G3cF+wAg6lmPK3WFjYEe+xPhS3wG] [normalv4]
[2019-05-27 19:46:32] Pool difficulty: 14415
[2019-05-27 19:46:32] GPU2[BUS:31] result rejected for job[16] [low difficulty share]
[2019-05-27 19:46:32] GPU4[BUS:35] result rejected for job[16] [low difficulty share]