dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
|
June 22, 2011, 12:21:47 AM |
|
I tried to run Diablo miner, but get error java not found. how to add java or give path to where java is? It will be helpful as Diablo miner runs only one instance of miner for all cards. Its a great feature which is not mentioned directly or i didn't saw it. About diablo's miner, it has a feature which all other miners lack for now. In other miners, you select device from 0, poclbm its -d0, phoenix its -DEVICE=0, but in diablo device start from 1. Just try this & u will see one miner mining in all cards u installed with only one worker. ./DiabloMiner-linux.sh -o api.bitcoin.cz -r 8332 -u YOURUSERNAME WITH WORKER -p PASSWORD OF WORKER -v 2 -w 128 -f 1
You can see, their is no where device mentioned. If you want to mention particular device then use -D 1 (capital D, small d is for debugging) If you want to use all devices, then don't use -D at all. Its a great feature not known to many as DiabloD3 not published so far directly in 1st post. His miner sends data to pool from one miner only instead of 8, which may reduce pool data receiving & bandwidth. With his miner you don't need to run 4 miners for 4 cards, just one miner is enough for 4 cards. Please tell how to enable java.
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
drgr33n (OP)
|
|
June 22, 2011, 12:51:51 AM |
|
I tried to run Diablo miner, but get error java not found. how to add java or give path to where java is? It will be helpful as Diablo miner runs only one instance of miner for all cards. Its a great feature which is not mentioned directly or i didn't saw it. About diablo's miner, it has a feature which all other miners lack for now. In other miners, you select device from 0, poclbm its -d0, phoenix its -DEVICE=0, but in diablo device start from 1. Just try this & u will see one miner mining in all cards u installed with only one worker. ./DiabloMiner-linux.sh -o api.bitcoin.cz -r 8332 -u YOURUSERNAME WITH WORKER -p PASSWORD OF WORKER -v 2 -w 128 -f 1
You can see, their is no where device mentioned. If you want to mention particular device then use -D 1 (capital D, small d is for debugging) If you want to use all devices, then don't use -D at all. Its a great feature not known to many as DiabloD3 not published so far directly in 1st post. His miner sends data to pool from one miner only instead of 8, which may reduce pool data receiving & bandwidth. With his miner you don't need to run 4 miners for 4 cards, just one miner is enough for 4 cards. Please tell how to enable java.EDIT: Complete
|
|
|
|
dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
|
June 22, 2011, 01:13:28 AM |
|
Complete? you added java?
|
|
|
|
drgr33n (OP)
|
|
June 22, 2011, 01:15:42 AM |
|
Complete? you added java?
yup and tested diablo
|
|
|
|
dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
|
June 22, 2011, 01:22:04 AM |
|
thanks.
|
|
|
|
drgr33n (OP)
|
|
June 22, 2011, 03:54:21 AM Last edit: June 22, 2011, 05:11:12 AM by drgr33n |
|
Just wanted to bump this I'm getting to the end of the bug fixes and everything is looking good But if anybody would like anything else included please let me know now or it won't be included. What we have so far miners updated. fixed spelling errors fixed filemanager added user requests ntp, java, screen etc new look shinny new kernel 2.6.39-2 tftpd, apache2 @ dnsmasq for running linuxcoin as a pxe server. wireless server setup script easy home folder encryption (migration supported only a couple of commands to complete) SCREENSHOTS:
|
|
|
|
hugolp
Legendary
Offline
Activity: 1148
Merit: 1001
Radix-The Decentralized Finance Protocol
|
|
June 22, 2011, 06:40:39 AM |
|
I just read that the new version of the linux Catalyst drivers, the 1.6, lets you overdrive the cards over the bios limits. I dont know if they are included already in Linuxcoin, but if they are not it would be a nice addition since it removes the need to flash the bios of the cards. EDIT: For reference: http://forum.bitcoin.org/index.php?topic=19776.msg258398#msg258398
|
|
|
|
drgr33n (OP)
|
|
June 22, 2011, 07:10:00 AM |
|
I just read that the new version of the linux Catalyst drivers, the 1.6, lets you overdrive the cards over the bios limits. I dont know if they are included already in Linuxcoin, but if they are not it would be a nice addition since it removes the need to flash the bios of the cards. EDIT: For reference: http://forum.bitcoin.org/index.php?topic=19776.msg258398#msg258398Thanks for the info A risky one !! Most if the hardware testing had been done with 11.4 I'm testing 11.6 as we speak if I think it's stable enough I'll add it as an option via the package manager.
|
|
|
|
hugolp
Legendary
Offline
Activity: 1148
Merit: 1001
Radix-The Decentralized Finance Protocol
|
|
June 22, 2011, 07:34:11 AM |
|
Thanks for the info A risky one !! Most if the hardware testing had been done with 11.4 I'm testing 11.6 as we speak if I think it's stable enough I'll add it as an option via the package manager. Yeah, I know drivers are always an issue. If it was just a normal update I would not ask for it, but I think not having to flash your cards is worth it. This was actually the only thing that was missing in Linux for mining. Now you can use AMDOverdriveCtrl without stupid limits. Well, one thing is missing in Linux and its being able to read the current and the temperature of the VCC's. RadeonVolt does it, but only for some 5850's. I wish there was a way to do it for 5870's.
|
|
|
|
steelhouse
|
|
June 22, 2011, 08:21:28 AM |
|
I could not get linuxcoin to detect my Z68 gigabyte network card or a wireless usb adapter that was suppose to work with linux, thus the kernel must be older. Also my Biostar Viotech 3100+ Via C7-d Cpu 1.6ghz Ddr2 Av Comb Could not load the 64 bit os. Maybe 32 bit.
|
|
|
|
organofcorti
Donator
Legendary
Offline
Activity: 2058
Merit: 1007
Poor impulse control.
|
|
June 22, 2011, 09:58:19 AM Last edit: June 22, 2011, 01:33:12 PM by organofcorti |
|
Sent you coinage. Working this hard when life kicks you in the balls means either you're a complete hard case - or in denial. Either way, you deserve praise and coins. More coins if you can make remote access n00b friendly (like in Ubuntu) without losing security.
Cheers mate!
|
|
|
|
malavita
Member
Offline
Activity: 90
Merit: 10
|
|
June 22, 2011, 01:08:19 PM |
|
Hi,
Please disable screensaver by default and maybe TOR support? :-)
Thx!!!
|
Somebody's gotta finance this revolution - you can help by donating supplies, ammo, field hospital beds or simply BTCs here: 1QBNASECM8z2LLojkqZH3s2F8Ur7nhafNc
|
|
|
organofcorti
Donator
Legendary
Offline
Activity: 2058
Merit: 1007
Poor impulse control.
|
|
June 22, 2011, 01:34:31 PM |
|
Hi,
Please disable screensaver by default and maybe TOR support? :-)
Thx!!!
For me, having screensaver on blank screen takes fewer cycles than having it off altogether. Fewer cycles means less power use.....
|
|
|
|
hugolp
Legendary
Offline
Activity: 1148
Merit: 1001
Radix-The Decentralized Finance Protocol
|
|
June 22, 2011, 01:38:21 PM |
|
I just read that the new version of the linux Catalyst drivers, the 1.6, lets you overdrive the cards over the bios limits. I dont know if they are included already in Linuxcoin, but if they are not it would be a nice addition since it removes the need to flash the bios of the cards. EDIT: For reference: http://forum.bitcoin.org/index.php?topic=19776.msg258398#msg258398Thanks for the info A risky one !! Most if the hardware testing had been done with 11.4 I'm testing 11.6 as we speak if I think it's stable enough I'll add it as an option via the package manager. I dont know if you are done with this, but it seems to be a false rumor. I just tested it in my XFX and the 11.6 drivers do NOT allow me to go beyond the bios limits.
|
|
|
|
GimEEE
Member
Offline
Activity: 112
Merit: 10
Ride or Die
|
|
June 22, 2011, 02:25:24 PM |
|
Hi, Please disable screensaver by default and maybe TOR support? :-) Thx!!!
For browsing? mining through tor is a bad idea, would cripple the latency and boost stale shares
|
The only way to make sure people you agree with can speak is to support the rights of people you don't agree with.
|
|
|
drgr33n (OP)
|
|
June 22, 2011, 03:10:09 PM Last edit: June 22, 2011, 03:22:25 PM by drgr33n |
|
I just read that the new version of the linux Catalyst drivers, the 1.6, lets you overdrive the cards over the bios limits. I dont know if they are included already in Linuxcoin, but if they are not it would be a nice addition since it removes the need to flash the bios of the cards. EDIT: For reference: http://forum.bitcoin.org/index.php?topic=19776.msg258398#msg258398Thanks for the info A risky one !! Most if the hardware testing had been done with 11.4 I'm testing 11.6 as we speak if I think it's stable enough I'll add it as an option via the package manager. I dont know if you are done with this, but it seems to be a false rumor. I just tested it in my XFX and the 11.6 drivers do NOT allow me to go beyond the bios limits. No it's true I tested last nite but lots and lots of system crashes ? Sent you coinage. Working this hard when life kicks you in the balls means either you're a complete hard case - or in denial. Either way, you deserve praise and coins. More coins if you can make remote access n00b friendly (like in Ubuntu) without losing security.
Cheers mate!
Thanks Oranofcorti !! Remote desktop will be added Hi,
Please disable screensaver by default and maybe TOR support? :-)
Thx!!!
The screensaver is now disabled by default. You can activate it when you like Tor is available via the package manager. I wont be adding this to linuxcoin due to space issues We are up to a little over 800mb already.
|
|
|
|
hugolp
Legendary
Offline
Activity: 1148
Merit: 1001
Radix-The Decentralized Finance Protocol
|
|
June 22, 2011, 03:27:09 PM |
|
No it's true I tested last nite but lots and lots of system crashes ? I dont get it then. My XFX 5870 wont go over 900Mhz with 11.6 drivers. Are you using some special command or something?
|
|
|
|
sal002
|
|
June 22, 2011, 03:28:43 PM |
|
Will there be a nice upgrade path for us existing LinuxCoin users (apt-get upgrade, perhaps?)
|
|
|
|
drgr33n (OP)
|
|
June 22, 2011, 03:42:56 PM Last edit: June 22, 2011, 04:26:03 PM by drgr33n |
|
No it's true I tested last nite but lots and lots of system crashes ? I dont get it then. My XFX 5870 wont go over 900Mhz with 11.6 drivers. Are you using some special command or something? I haven't got a clue why this hasn't worked for you ? I won't be adding 11.6 to linuxcoin anyway it's very VERY unstable, stick with 11.5 for now. Will there be a nice upgrade path for us existing LinuxCoin users (apt-get upgrade, perhaps?)
Unfortunately not the final version will be capable of this but I really don't have much time to get this out. as you've probably read I'm having some troubles in real life atm and just wanted to provide you guys with something with all the bugs fixed and user requests before I go AWOL for a little bit Hopefully to return on top of things and not homeless I could not get linuxcoin to detect my Z68 gigabyte network card or a wireless usb adapter that was suppose to work with linux, thus the kernel must be older. Also my Biostar Viotech 3100+ Via C7-d Cpu 1.6ghz Ddr2 Av Comb Could not load the 64 bit os. Maybe 32 bit.
Sorry didn't see you there. Again 32bit support will have to go on the back burner for now as it would require me to rebuild the whole of linuxcoin with 32bit in mind. The final version will have both 32 / 64 bit support. I will look into your net card now. LinuxCoin's kernel has just been upgraded So we have .. miners updated. fixed spelling errors fixed filemanager added user requests ntp, java, screen etc new look shinny new kernel 2.6.39-2 tftpd, apache2 @ dnsmasq for running linuxcoin as a pxe server. wireless server setup script easy home folder encryption (migration supported only a couple of commands to complete) added vino / remmina (remote desktop client and server) You guys have about four hours till I pack this up and distribute it Any requests ? get them in now of they won't be included !!
|
|
|
|
Departure
|
|
June 22, 2011, 04:55:41 PM |
|
yeah an installer!!!!
It would be nice to install it on HD and use as any other OS
|
|
|
|
|