sharky112065
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 09, 2011, 08:04:16 PM |
|
There is no source config. It's been heavily customized by chrooting the filesystem and tweaking.
I knew it was a long shot, but was hoping you used one of those Custom LiveCD creation tools ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Anyway I guess I will have to just keep trying with this dual 6990 video card problem, I will probably just come back to LinuxCoin seeing as it works out of the box ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) LinuxCoin is the way ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) If you do find something on your travels that will improve linuxcoin let me know and I'll add it to the next version. I'm on the fence though. I like debian but its not my native linux distro. I use slackware and have done for years so i think to take linuxcoin to the next stage I might migrate over to slax and build the next livecd from scratch. This way I can add lots more security features and I can distribute updates etc via a package manager ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I did look into creating debs but got about two paragraphs into the documentation, rolled a fattie and logged into facebook hahaha ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) These releases are far from final. To tell you the truth they were an experiment to test the water and to see if the bitcoin community was interested in a linux distro dedicated to bitcoin. I think the thread view count says it all there are lots of people interested I can create slackware packages with my eyes closed. I'm having a little break from linuxcoin and going to try and code up some sort of GUI for mining and some other nice bits of software. These will be separate from the linuxcoin development but will be features added and also available for download to use with other linux distros. I love Slackware. I will love you forever if you switch Linuxcoin over. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I use Slackware for my Nat/Firewall.
|
Donations welcome: 12KaKtrK52iQjPdtsJq7fJ7smC32tXWbWr
|
|
|
organofcorti
Donator
Legendary
Offline
Activity: 2058
Merit: 1007
Poor impulse control.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 12:06:08 PM |
|
+1 for getting slack while mining. J.R. "Bob" Dobbs commands it. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fen%2Fa%2Fa3%2FBobdobbs.png&t=665&c=ILPC_r2tA9tqJg)
|
|
|
|
gnar1ta$
Donator
Hero Member
Offline
Activity: 798
Merit: 500
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 04:45:17 PM |
|
I seem to be missing some initial step when using AMDOverdrive and aticonfig on 6950's. I can get the core clock to adjust but not mem clock or voltage or powertune. I've tried with the GUI open, with the -b command line to load a saved profile, and with aticonfig --odsc. All I get is changes to the core clock.
|
Losing hundreds of Bitcoins with the best scammers in the business - BFL, Avalon, KNC, HashFast.
|
|
|
Jonathan Ryan Owens
Donator
Sr. Member
Offline
Activity: 392
Merit: 252
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 04:51:20 PM |
|
I seem to be missing some initial step when using AMDOverdrive and aticonfig on 6950's. I can get the core clock to adjust but not mem clock or voltage or powertune. I've tried with the GUI open, with the -b command line to load a saved profile, and with aticonfig --odsc. All I get is changes to the core clock.
There's a downward adjustment range that I've come up against on my 6950s. If you set the memory too low, it defaults back to 1250. Try taking your memory clock down to 800 and see if that works, then go a bit lower.. then lower..
|
|
|
|
Smalleyster
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
I yam what I yam. - Popeye
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 04:59:10 PM Last edit: July 10, 2011, 06:55:10 PM by Smalleyster |
|
This isn't very secure if root auto-logs in at reboot. Kind of defeats the purpose of having a user.
This is my issue. Has anyone been able to make their USB demand a password before seeing the desktop? I'm certainly too stupid to figure out how to do it so far.
|
|
|
|
TripHammer
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 05:11:41 PM |
|
Again as I said, from the first post:
If you want to disable autologin edit /etc/inittab and
sudo su
vi /etc/inittab
then replace this
Code: 1:12345:respawn:/bin/login -f user </dev/tty1 >/dev/tty1 2>&1
for this
Code: 1:12345:respawn:/bin/bash </dev/tty1 >/dev/tty1 2>&1
and reboot
|
|
|
|
Smalleyster
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
I yam what I yam. - Popeye
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 06:57:35 PM Last edit: July 11, 2011, 01:15:59 AM by Smalleyster |
|
As expected that post above did not work, I'll keep fumbling at it.
EDIT
This is absolutely too funny for words. I decide to go through the typing for the encryption instructions in the first post and it tells me it needs 2.5x the space available even though I have a 4gb USB and am using the 2GB persistence file.
This OS is bound and determined not to let a password get in its way. lol
|
|
|
|
gnar1ta$
Donator
Hero Member
Offline
Activity: 798
Merit: 500
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 07:11:10 PM |
|
I seem to be missing some initial step when using AMDOverdrive and aticonfig on 6950's. I can get the core clock to adjust but not mem clock or voltage or powertune. I've tried with the GUI open, with the -b command line to load a saved profile, and with aticonfig --odsc. All I get is changes to the core clock.
There's a downward adjustment range that I've come up against on my 6950s. If you set the memory too low, it defaults back to 1250. Try taking your memory clock down to 800 and see if that works, then go a bit lower.. then lower.. Thanks this worked down to 800 at 900 core, below 800 it jumps back up to 1250. Have you had any luck with voltage or powertune? Or is it set by the core clock?
|
Losing hundreds of Bitcoins with the best scammers in the business - BFL, Avalon, KNC, HashFast.
|
|
|
drgr33n (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 07:53:30 PM |
|
The wiki is online !! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Please register and add as much info as possible guys !! I would of added more but I've been pressed for time.
|
|
|
|
Tartarus
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 10, 2011, 09:00:28 PM |
|
I seem to be missing some initial step when using AMDOverdrive and aticonfig on 6950's. I can get the core clock to adjust but not mem clock or voltage or powertune. I've tried with the GUI open, with the -b command line to load a saved profile, and with aticonfig --odsc. All I get is changes to the core clock.
There's a downward adjustment range that I've come up against on my 6950s. If you set the memory too low, it defaults back to 1250. Try taking your memory clock down to 800 and see if that works, then go a bit lower.. then lower.. Thanks this worked down to 800 at 900 core, below 800 it jumps back up to 1250. Have you had any luck with voltage or powertune? Or is it set by the core clock? With my 6950, at the command line I'm able to set 900 for core and 775 for memory. What I did have to do however first was to modify the profiles for Low/Medium/High so that there was a minimum rage for the memory clock below 1250. I think that's the problem you're having right now.
|
|
|
|
Bitcoin Swami
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 02:13:57 AM Last edit: July 11, 2011, 03:08:19 AM by mayabong |
|
Anyone know how to control fanspeed on linuxcoin if its not your main display card?
I know I can use AMDOverdriveCtrl but on one of my cards it doesn't recognize the fan speed. I'm not sure why. Its a different model than my other 6950's.
also is there a way to make it auto according to temp, maybe by a script or something?
EDIT nevermind search is your friend.
|
|
|
|
Tartarus
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 03:04:25 AM |
|
Anyone know how to control fanspeed on linuxcoin if its not your main display card?
I know I can use AMDOverdriveCtrl but on one of my cards it doesn't recognize the fan speed. I'm not sure why. Its a different model than my other 6950's.
You can either use AMDOverdriveCtrl -i N (and just -i to list all of the cards) to set things up or: aticonfig --pplib-cmd 'set fanspeed cardNumber Speed'
also is there a way to make it auto according to temp, maybe by a script or something?
Yes, there's a few threads such as http://forum.bitcoin.org/index.php?topic=27186.0
|
|
|
|
Smalleyster
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
I yam what I yam. - Popeye
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 03:14:55 AM Last edit: July 11, 2011, 07:47:12 PM by Smalleyster |
|
re:pasword issues
7/10/11
I DID IT! And the good part is if you do it wrong it screws everything up and makes it look like you have an empty wallet. But your wallet is still there hidden and waiting for you to come and rescue it! YEEEEHHHAAAA!!!! 8^)
And it's a GUI, screw all that code stuff!
LinuxCoin rocks and will be reasonably secure for that average user!
8^)
(details will follow after some more testing tomorrow)
7/11/11
Well, got a fistfull of USB sticks. As soon as the final tweeks on the prototypes are fully tested, then I get to figure out a production system. then comes the fun part, documentation.
|
|
|
|
godofal
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 160
Merit: 100
TACNAYN - destroyer of worlds
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 12:37:26 PM |
|
i have a problem, and i just can't seem to get it to work i've used unetbootin to create a bootable USB stick, but it wont work on my miner :S but, it DOES work on my main PC
when i set a windows instalation on that USB stick, it lists under "HDD" in the bios, but when i use linuxcoin, it lists under "removable media" so, i set boot priority to removable media, and it just skips it and tries the HDD (wich wont work, no OS there) now, when i disconnect the HDD, it just says "DISK BOOK FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" i have no clue whatsoever what's causing this as it works fine on my main computer, and the miner recognizes windows from the same USB stick
i've tried switching ports for the USB stick, tried a second stick, resetting the bios to factory and having only removable media as a boot option
the motherboard of the miner is: Asus A8N5X
help would be much appreciated!
|
|
|
|
drgr33n (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 01:23:42 PM |
|
i have a problem, and i just can't seem to get it to work i've used unetbootin to create a bootable USB stick, but it wont work on my miner :S but, it DOES work on my main PC
when i set a windows instalation on that USB stick, it lists under "HDD" in the bios, but when i use linuxcoin, it lists under "removable media" so, i set boot priority to removable media, and it just skips it and tries the HDD (wich wont work, no OS there) now, when i disconnect the HDD, it just says "DISK BOOK FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" i have no clue whatsoever what's causing this as it works fine on my main computer, and the miner recognizes windows from the same USB stick
i've tried switching ports for the USB stick, tried a second stick, resetting the bios to factory and having only removable media as a boot option
the motherboard of the miner is: Asus A8N5X
help would be much appreciated!
Try doing a selective boot. I think on asus boards its esc or F12 on the boot screen. Remember people we now have a wiki. If you have some useful info on installation / comatability please add it to the wiki so people don't have to search through all these posts. http://www.linuxcoin.co.uk/wiki
|
|
|
|
godofal
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 160
Merit: 100
TACNAYN - destroyer of worlds
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 01:31:15 PM |
|
allright, i selected the USB stick and it gives me a different error now: ERROR: No configuration file found no DEFAULT or UI configuration directive found! boot:
i can type stuff after boot: aparantly it wants a kernel or something, whenever i type something there it says "could not find kernel image: xxx"
|
|
|
|
drgr33n (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 01:48:43 PM |
|
allright, i selected the USB stick and it gives me a different error now: ERROR: No configuration file found no DEFAULT or UI configuration directive found! boot:
i can type stuff after boot: aparantly it wants a kernel or something, whenever i type something there it says "could not find kernel image: xxx"
Recreate the USB drive I know about this bug it's unetbootin so its out of my hands but if you set it up again it should be ok.
|
|
|
|
kjj
Legendary
Offline
Activity: 1302
Merit: 1026
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 02:17:04 PM |
|
Also, after you format the drive in Windows, unmount and unplug it, then plug it back in before running unetbootin. And if you are going to edit the config file from Windows, do the unmount/unplug/replug cycle again after the unetbootin step.
You really shouldn't need to, but it can help if you get strange problems like this.
|
17Np17BSrpnHCZ2pgtiMNnhjnsWJ2TMqq8 I routinely ignore posters with paid advertising in their sigs. You should too.
|
|
|
godofal
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 160
Merit: 100
TACNAYN - destroyer of worlds
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 02:18:40 PM Last edit: July 11, 2011, 03:02:27 PM by godofal |
|
i'l try, but i dont think itl work since ive done that 3 times already plus, it DOES work on my main PC sounds like something's wrong with the miner or something, compatibility or something like that?
well, thats kinda odd... i have 2 USB sticks of 8GB, a kingston and a sandisk when i put linuxcoin on the sandisk, i get the error above, but using the kingston i get "bootmgr is missing press CTRL+ALT+DEL to restart" they have the exact same version of it using unetbootin...
are there other programs like unetbootin to try so that's ruled out?
il try a standard ubuntu, see if that works... yeah... that wont work either: still bootmgr missing...
|
|
|
|
dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2011, 04:21:51 PM |
|
You formatted to FAT or NTFS?
|
|
|
|
|