chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
April 14, 2016, 08:55:42 AM |
|
Option for computer restart when seek GPU found would be very useful. Seek GPU could be determined if 3 (or more) consecutive hashrates of GPU are identical.
|
|
|
|
asidamani
Newbie
Offline
Activity: 63
Merit: 0
|
|
April 14, 2016, 09:17:36 AM |
|
I have 4x7990, connecting to the eu1.ethpool.org, the invalid share rate is about 10%. With the 2x7990+r9 390, the invalid rate is 1% or lower.
Any reason for that? Catalyst 15.11+ 15.12 opecl.
|
|
|
|
MacT
Full Member
Offline
Activity: 141
Merit: 100
ZOHEM | DECENTRALISED USER BEHAVIOUR DATA PROTOCOL
|
|
April 14, 2016, 09:32:32 AM |
|
v1.2:if i mine only ether on my 380 card it will do 20mh, if i dual mine on intensity 30 drops to 18 mh. on 290x 28mh on eth only and 28 on dual is it a bug or a card is weak? and one more thing. i have 2x 380 and 1x290. the two 380 is mining on different hashrate.... My 4 identical plain 380 cards report ~ 20.7, 20.7, 20.4, and then 21.4 all at 1150/1450/-50mV 805 Watts
|
|
|
|
zorvalth
|
|
April 14, 2016, 09:43:32 AM |
|
How does the temperature management works? what happens when the set temp is reached?
|
|
|
|
DarkRavenGamer
Newbie
Offline
Activity: 33
Merit: 0
|
|
April 14, 2016, 09:54:06 AM |
|
Please add support for solo mining.
|
|
|
|
Strannik-74
|
|
April 14, 2016, 10:04:35 AM |
|
can i mine EXP i DCR at the same time?
You can, no problem = ) Is hard to do 2 clicks and try? How does the temperature management works? what happens when the set temp is reached?
Throttling
|
|
|
|
zorvalth
|
|
April 14, 2016, 10:14:17 AM |
|
Thanks, is there support for global and local work?
|
|
|
|
Xdragon
|
|
April 14, 2016, 10:18:26 AM |
|
v1.2:
- Added "-allpools" option.
what need I write as an option? eth.coinmine.pl POOL version No pool specified for Decred! Ethereum-only mining mode is enabled ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: qtminer stratum mode
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4 fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366 06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9 191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8 05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Hi - you use qtminer mode so change the port to 4001 feeleep coinmine.pl not working with this miner nor with "-esm 0 -allpools 1" nor with "-esm 1 -allpools 1" option. Also currently standalone Qtminer is not working too, I got message - "waiting for work package". ethminer + stratum is working.
|
|
|
|
hepilord
|
|
April 14, 2016, 10:21:25 AM |
|
can i mine EXP i DCR at the same time?
You can, no problem = ) Is hard to do 2 clicks and try? How does the temperature management works? what happens when the set temp is reached?
Throttling I tryed mine EXP on dwarfpool.com and i have this: OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 10:41:33 AM |
|
coinmine.pl not working with this miner nor with "-esm 0 -allpools 1" nor with "-esm 1 -allpools 1" option. Also currently standalone Qtminer is not working too, I got message - "waiting for work package". ethminer + stratum is working.
coinmine uses another stratum implementation, it works with "mining_proxy.exe", not with "eth-proxy.exe". Same for coinotron and suprnova and I'm working on it: https://bitcointalk.org/index.php?topic=1433925.220In coinmine help section I see they support qtminer so you could use it, but it seems they broke its support, I cannot make it work with qtminer.
|
|
|
|
zorvalth
|
|
April 14, 2016, 10:47:41 AM |
|
@Claymore , is there support for global and local work?
|
|
|
|
Bojcha
|
|
April 14, 2016, 10:53:51 AM |
|
what is farm-reckeck value?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 10:53:58 AM |
|
I let the first version of the miner run on ethermine. After 24h the pool reported 24h avg hashrate was above 31Mh. Then lowering to under 28... Just variance or something else? I just stopped the miner and re-run the latest version 1.2. We will see I tested ethpool.org with qtminer for about a week, and then with my miner. So perhaps it's a good idea if you start qtminer on same pool for a couple of days and then compare invalid shares rate and hashrate that pool shows. I got about +4% more hashrate on pool with my miner and only 0.1-0.2% invalid shares instead of about 2-3% for qtminer. But anyway this pool shows 3-4% less hashrate that my miner shows, perhaps it is because pools cannot reach 100% efficiency on Ethereum network because of a very short block time period.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 10:55:14 AM |
|
@Claymore , is there support for global and local work?
global work is related to "-ethi" option. Local work cannot be changed.
|
|
|
|
zorvalth
|
|
April 14, 2016, 10:57:41 AM |
|
@Claymore , is there support for global and local work?
global work is related to "-ethi" option. Local work cannot be changed. Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 10:58:18 AM |
|
what is farm-reckeck value?
This option is related for HTTP protocol, Stratum gets new job immediately as soon as pool got it for miner.
|
|
|
|
ekrem
|
|
April 14, 2016, 11:00:06 AM |
|
v1.2:
- Added "-allpools" option.
what need I write as an option? eth.coinmine.pl POOL version No pool specified for Decred! Ethereum-only mining mode is enabled ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: qtminer stratum mode
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4 fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366 06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9 191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]} Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000 ETH: Stratum - Connected Auth failed : {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8 05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000 02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Hi - you use qtminer mode so change the port to 4001 feeleep i already test all port 4000, 4001 3000 not work eth.coinmine.pl with this minner
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 11:01:09 AM |
|
@Claymore , is there support for global and local work?
global work is related to "-ethi" option. Local work cannot be changed. Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal? I don't have 7xxx cards here to test. I use ATI ADL Overdrive APIs v5 and v6, if your card uses <v5 then it will not work.
|
|
|
|
ldw-com
|
|
April 14, 2016, 11:07:06 AM |
|
just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.
However when raising dcri, hashrate of eth goes up as well. Kind of weird.
I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.
Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..
Any suggestions for that Claymore?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 14, 2016, 11:12:30 AM |
|
just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.
However when raising dcri, hashrate of eth goes up as well. Kind of weird.
I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.
Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..
Any suggestions for that Claymore?
Do you have better hashrate for mode 0 than for mode 1? What card do you have? And what hashrates for both modes?
|
|
|
|
|