Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Chugumoto]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

370=7850

[1715112177]

1715112177

[1715112177]

1715112177

[1715112177]

1715112177

[1715112177]

1715112177

[1715112177]

1715112177

[1715112177]

1715112177

[agkbill]

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer

Same here about reported hashrate but it is showing effective hashrate, im using R9 280x vapors

Guys, read pool's help, add dot and rig name after address, from their help page:
...
0x4bb96091ee9d802ed039c4d1a5f6216f90f81b01.rig1
...
To enable shares statistics you should enable qtminer mode "-esm 1" and wait some time until pool displays new stats.

Thank you, works to add the name with
...
0x4bb96091ee9d802ed039c4d1a5f6216f90f81b01.rig1
...
maybe "-eworker" would have done it as well.

But at http://ethermine.org/ "-esm 1" do not seems to work, miner have been running around 1 houre now and nothing reported in as "Reported Hashrate".

[kanoptx]

Quick question: in order to mine eth with ethminer one needs to download the blockchain with geth. so does geth still need to run with this miner correct?
what about decred? what do i need to download the decred's blockchain? thank you.

edit: would it also be okay to use claymore double miner while also using decred's command line wallet to mine POS. thank you.

Maybe I just need to run the decred wallet, right?

[zorvalth]

But at http://ethermine.org/ "-esm 1" do not seems to work, miner have been running around 1 houre now and nothing reported in as "Reported Hashrate".

Thats completely normal neither original qtmienr or clymore' qtminer mode reporting hashrate. Reporting hashrate is only active with etth-proxy

[psk5000]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

370=7850

my 7850 have only 1GB

[kanoptx]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

370=7850

my 7850 have only 1GB

I think you need 2GB to mine eth. is that why you want to set only dcr for 7850?

[dannygroove]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

[Claymore]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

[omnik]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

[psk5000]

and for decred only ?

[zorvalth]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

More like
-mode 0,1,1

meaning: -mode 0(Eth+Dcr on GPU 0),1(Eth on GPU1),1(Eth on GPU2)

[Claymore]

By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.
There is no way to mine Decred only. Either eth+dcr (mode 0), or eth (mode 1).

[psk5000]

By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.

ok and if the card can't mine eth but only dcr ?

[Claymore]

By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.

ok and if the card can't mine eth but only dcr ?

You have to use some different miner if you want to mine DCR only.

[omnik]

My experience:
1x Power Color R9 280X @ 950/1250
2x Sapphire R9 279 @ 920/1400

Genoil v1.0.3 - 47MH/s stable hash. Dwarfpool via Proxy.
Claymore v1.2 (ETH+DCR on 280x, 2x270 ETH only, DCR intensity 14) - 45.2MH/s ETH, 137MH/s DCR. Dwarfpool Stratum and Suprnova DCR pools.

137MH/s on DCR according to calc brings about 0.14 DCR/day or 0.2USD.

My conclusion is not seeing a point of using Claymore miner in this setup, considering lost hash on ETH and dev fee (which I have absolutely nothing against).

[dannygroove]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

As I understand it now, there is no need to specify if a card will do -mode 0. Only specify which cards will be doing -mode 1 the way Claymore just explained. So in your case -mode 1-12, correct.

[omnik]

i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

More like
-mode 0,1,1

meaning: -mode 0(Eth+Dcr on GPU 0),1(Eth on GPU1),1(Eth on GPU2)

It doesn't work... all 3 cards mine ETH and DCR:



My option actualy work:
-mode 1-12 -mode 0-0

[dannygroove]

It doesn't work... all 3 cards mine ETH and DCR:



My option actualy work:
-mode 1-12 -mode 0-0

You are right, I misread the OP.

[zorvalth]

My experience:
1x Power Color R9 280X @ 950/1250
2x Sapphire R9 279 @ 920/1400

Genoil v1.0.3 - 47MH/s stable hash. Dwarfpool via Proxy.
Claymore v1.2 (ETH+DCR on 280x, 2x270 ETH only, DCR intensity 14) - 45.2MH/s ETH, 137MH/s DCR. Dwarfpool Stratum and Suprnova DCR pools.

137MH/s on DCR according to calc brings about 0.14 DCR/day or 0.2USD.

My conclusion is not seeing a point of using Claymore miner in this setup, considering lost hash on ETH and dev fee (which I have absolutely nothing against).

I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's

I need at least 24 hours to make any conclusion but it looks promising now.

[dannygroove]

I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's

I need at least 24 hours to make any conclusion but it looks promising now.

Can you keep us posted on your 24H results?