Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 27, 2017, 09:01:37 AM |
|
You are sixth or seventh here. Try to read thread before posting something It will take me a few days to check it and release an update. Firstly, I need to buy 1060 card since I have 1080 and 1070 only, 1060 was not good for mining in past so I did not buy it and did not check it. Then I will try to get higher speed in dual mining for these cards. I am having some problems with the temp/fan monitor, v9.5 shows only 3 out of 4 cards temp/fan (gpu0, gpu1, gpu2). After updated to v9.6, it shows gpu0, gpu2, gpu3. Any solution to show all 4 cards temp/fan? GPU-z shows all 4 cards stats without problem.
May be disable crossfire? If it is not the case, I need more info about GPUs.
|
|
|
|
ckh
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 27, 2017, 09:19:28 AM |
|
I am having some problems with the temp/fan monitor, v9.5 shows only 3 out of 4 cards temp/fan (gpu0, gpu1, gpu2). After updated to v9.6, it shows gpu0, gpu2, gpu3. Any solution to show all 4 cards temp/fan? GPU-z shows all 4 cards stats without problem.
May be disable crossfire? If it is not the case, I need more info about GPUs. [/quote] Didn't realize crossfire is not disable, problem solved. Thanks a lot!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 27, 2017, 09:44:52 AM |
|
Claymore, Can you verify if you are in talk with AMD developers to get this bug thrashing issue fixed? While your at it, how about getting it fixed on the R9 280X also, I miss the 28MH/s speeds I used to get with Tahiti GPUs.
Yes I can confirm it, but it does not mean that this problem will be fixed.
|
|
|
|
Coin++
|
|
June 27, 2017, 09:47:40 AM |
|
Thank you for this new version, particulary for Linux users :-).
Are you thinking about some optimisation for nVidia users (for example because DAG limitations for AMD users) ?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 27, 2017, 11:00:12 AM |
|
I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube. So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.
|
|
|
|
Bojcha
|
|
June 27, 2017, 11:25:31 AM |
|
I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube. So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.
Where's llink?
|
|
|
|
NoOneLt
Member
Offline
Activity: 140
Merit: 10
|
|
June 27, 2017, 12:15:13 PM |
|
Hey guys, help to troubleshoot, on ethermine.org my ETH rate is well below reported though SIA is OK. Should i switch pool or look somwhere into my system? Win 10 latest version, latest drivers, on wifi: WiFir esults: Anyone can help?
|
|
|
|
Msobh
Jr. Member
Offline
Activity: 51
Merit: 2
|
|
June 27, 2017, 12:24:24 PM |
|
I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube. So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.
Where's llink? You can find that in this video https://www.youtube.com/watch?v=l3XOtQtFKSQ >> 15:40 Bits Be Trippin' channel so can anyone test sgminer for epoch 140 and compare it with claymore
|
|
|
|
Bojcha
|
|
June 27, 2017, 12:28:11 PM |
|
I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube. So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.
Where's llink? You can find that in this video https://www.youtube.com/watch?v=l3XOtQtFKSQBits Be Trippin' channel so can anyone test sgminer for epoch 140 and compare it with claymore No i dont see it.
|
|
|
|
justchil
Member
Offline
Activity: 92
Merit: 10
|
|
June 27, 2017, 01:14:04 PM |
|
Good update for Ethman Solved issues I was having! I still have the little quirk with the webpage -- if you have a black background this text is black too... so you have to highlight it to make it visible. Total Ethereum Hashrate: 986.32 MH/s, 269/0 (0.00%) Total Decred Hashrate: 0.0 MH/s, 0/0 (0.00%) Total Online Miners: 9 Total Working GPUs: 33
|
|
|
|
Beroxull
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 27, 2017, 02:08:35 PM |
|
I've read the guide so I understand the basic premises of the command switches. I really need some examples of command line switches of different GPU Frankenstein setups so I can emulate and tweak what I need.
Does some sort of brain dump exist out there of something like this?
|
|
|
|
ciripel1289
Newbie
Offline
Activity: 50
Merit: 0
|
|
June 27, 2017, 02:55:41 PM |
|
My question is about the Dpools.txt back pools file. I want to mine UBQ as main coin from a main pool and i have also a second pool as backup. this is set up. I want to mine sia as main second coin from a pool. If that pool is down i want to mine decred instead from the backup pool. I can't make the dpools.txt file to work like this.
Normally i can set up the -dcri command in the config.txt file and also the -dcoin command. But i want to set up 2 pools as a backup. First pool to be a Decred pool and the second one to be a Siacoin pool. Can i make a file dpools.txt like this?
POOL: stratum+tcp://sia-eu1.nanopool.org:7777, WALLET: <ADRESS>/<USER>/<mail>, DCOIN: sia, DCRI: 17 POOL: stratum+tcp://dcr.suprnova.cc:3252, WALLET: user.1, PSW: 1, DCRI: 28
Seems to not be accepted the DCOIN and DCRI command in the dpools.txt. So due to this i guess it is only possible to mine only one time of second coin and to set up 2 pools for the same coin. Is this correct or there is another workaround?
|
|
|
|
Killcycle
Newbie
Offline
Activity: 54
Merit: 0
|
|
June 27, 2017, 03:32:38 PM |
|
This is, how i Looks like for me with -dcri 17ETH: 06/27/17-17:29:36 - New job from eu1.nanopool.org:9999 ETH - Total Speed: 24.412 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:15 ETH: GPU0 24.412 Mh/s SC - Total Speed: 414.996 Mh/s, Total Shares: 6, Rejected: 0 SC: GPU0 414.996 Mh/s GPU0 t=88C fan=69% Great or not, or what do you think?
|
|
|
|
joosep
|
|
June 27, 2017, 03:45:00 PM Last edit: June 27, 2017, 04:35:56 PM by joosep |
|
This is, how i Looks like for me with -dcri 17ETH: 06/27/17-17:29:36 - New job from eu1.nanopool.org:9999 ETH - Total Speed: 24.412 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:15 ETH: GPU0 24.412 Mh/s SC - Total Speed: 414.996 Mh/s, Total Shares: 6, Rejected: 0 SC: GPU0 414.996 Mh/s GPU0 t=88C fan=69% Great or not, or what do you think? Temperature is too high, I keep at least under 75C.
|
|
|
|
Bob_chemist
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 27, 2017, 03:59:08 PM |
|
@Claymore
I've found a bug in EthMan 3.3: Right clicking on rig turned off (red or grey) and choosing "Edit config.txt" causes crash of EthMan. Sometimes is needed to do it twice.
|
|
|
|
goro2030
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 27, 2017, 04:01:18 PM |
|
Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .
Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?
|
|
|
|
ciripel1289
Newbie
Offline
Activity: 50
Merit: 0
|
|
June 27, 2017, 04:31:28 PM |
|
Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .
Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?
What Hash u have on it when u mine only ETH? If it is aprox 11 then try using the -dcri command and lower the value... use - in CLI.
|
|
|
|
goro2030
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 27, 2017, 05:02:47 PM |
|
Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .
Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?
What Hash u have on it when u mine only ETH? If it is aprox 11 then try using the -dcri command and lower the value... use - in CLI. Thanks for the quick reply! Nope, no luck... if just mining ETH, it's still at 2 MH/S Any other suggestions to check?
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
|
June 27, 2017, 05:27:39 PM |
|
fixed ethermine for 1060, tested on 5x 1070 with memory set to 2400mhz
|
|
|
|
lotfiwho
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 27, 2017, 05:51:44 PM |
|
Cant mine ETH with that GPU anymore. Mine ZEC with it. you can mine eth with it but just i think you didn't add the appropriate port "3333" --- 9999 or 8888 do i right or not ?
|
|
|
|
|