sharmanov
Newbie
 Offline
Activity: 54
Merit: 0
|
 |
July 13, 2019, 06:57:09 PM |
|
getting GPU #0 strap "1" failed, error 1002 how do I fix that and what does that error mean? all straps get that error
|
|
|
|
|
|
|
|
|
|
|
|
Make sure you back up your wallet regularly! Unlike a bank account, nobody can help you if you lose access to your BTC.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Luke83
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 15, 2019, 08:04:20 AM |
|
Hello,
I have a 6 nitro+ Vega 64 Limited Edition mining rig, each card is doing 51+ Mhs, but it happens time to time, that randomly, 1 card, (or more) from the 6, drops its hashrate for like 30 to 60 seconds and then goes back to 51mhs.
I am using Claymore 14.7 with -strap 4 option.
My overclock settings are :
GPU : 1408 Mhz 905 Mv;
Memory : 1100 Mhz 900Mv
Fans are set at 90% and the power draw is around 155W.
I think my overclocking is not stable. Or maybe some settings are wrong in the Bios? (motherboard : MSI Z270 A PRO)
The drop can be down to 49 or 44 or even 42 Mhs. And when the drop happens the power draw is reduced to like 140W.
Any one can assist? Your help would be very appreciated.
|
|
|
|
|
simpleCZAR
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 15, 2019, 11:37:09 AM |
|
Vega 64 speed drop--
you already have much better speed than most. It could be due to temp as summer kicks in..Memory downclocks if hot at about 70C for mine ..mine does that but does not come up..so I increased the fan speed
|
|
|
|
|
Luke83
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 15, 2019, 11:52:45 AM |
|
Vega 64 speed drop--
you already have much better speed than most. It could be due to temp as summer kicks in..Memory downclocks if hot at about 70C for mine ..mine does that but does not come up..so I increased the fan speed
My Vegas are running between 48 to 55°C with 90% fan speed, I have a private room with aircon, so the temp is not the issue I guess |
|
|
|
|
farmgpu0914
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 15, 2019, 07:23:16 PM
Last edit: July 15, 2019, 07:37:14 PM by farmgpu0914 |
|
Hi celeron3930/4GbRAM/8Gb usb Flash drive/ 6card RX580 4Gb on hiveOS, ETC mining Claymore 14.7 AMD Rx580 4Gb hangs on start and writing: not enough GPU memory to place DAG  on epoch #280 ? Then WATCHDOG: GPU error, you need to restart miner What I should do - expand RAM on motherboard, expand disk drive or something else? 21:45:44:309 6ac2d740 Check and remove old log files...
21:45:44:310 6ac2d740 args: -mport -3333 -r 1 -logfile /var/log/miner/claymore/lastrun_noappend.log -tt 68 -ttli 76 -tstop 82 -mode 1 -allcoins etc -allpools 0 -
21:45:44:310 6ac2d740
21:45:44:310 6ac2d740 ................................................................ͻ
21:45:44:310 6ac2d740 . Claymore's Dual GPU Miner - v14.7 .
21:45:44:310 6ac2d740 . ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK .
21:45:44:310 6ac2d740 ................................................................ͼ
21:45:44:310 6ac2d740
21:45:44:310 6ac2d740 b745
21:45:44:511 6ac2d740 no address specified - ignore
21:45:44:511 6ac2d740 ETH: 1 pool is specified
21:45:44:511 6ac2d740 Main Ethereum pool is etc.2miners.com:1010
21:45:44:560 6ac2d740 OpenCL platform: AMD Accelerated Parallel Processing
21:45:44:560 6ac2d740 OpenCL initializing...
21:45:44:560 6ac2d740 AMD Cards available: 6
21:45:44:560 6ac2d740 GPU #0: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 1:0:0)
21:45:44:560 6ac2d740 GPU #0 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 GPU #1: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 3:0:0)
21:45:44:560 6ac2d740 GPU #1 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 GPU #2: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 4:0:0)
21:45:44:560 6ac2d740 GPU #2 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 GPU #3: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 5:0:0)
21:45:44:560 6ac2d740 GPU #3 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 GPU #4: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 8:0:0)
21:45:44:560 6ac2d740 GPU #4 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 GPU #5: Ellesmere (Radeon RX 580 Series), 4087 MB available, 36 compute units (pci bus 9:0:0)
21:45:44:560 6ac2d740 GPU #5 recognized as Radeon RX 480/580
21:45:44:560 6ac2d740 POOL/SOLO version
21:45:44:560 6ac2d740 Platform: Linux
21:45:44:623 6ac2d740 AMD ADL library not found.
21:45:44:625 6ac2d740 amdgpu cnt: 6
21:45:44:628 6ac2d740 start building OpenCL program for GPU 0...
21:45:44:728 6ac2d740 done
21:45:44:935 6ac2d740 start building OpenCL program for GPU 1...
21:45:45:036 6ac2d740 done
21:45:45:243 6ac2d740 start building OpenCL program for GPU 2...
21:45:45:343 6ac2d740 done
21:45:45:549 6ac2d740 start building OpenCL program for GPU 3...
21:45:45:650 6ac2d740 done
21:45:45:858 6ac2d740 start building OpenCL program for GPU 4...
21:45:45:958 6ac2d740 done
21:45:46:166 6ac2d740 start building OpenCL program for GPU 5...
21:45:46:266 6ac2d740 done
21:45:46:479 6ac2d740 GPU #0: algorithm ASM 1
21:45:46:486 6ac2d740 GPU #1: algorithm ASM 1
21:45:46:493 6ac2d740 GPU #2: algorithm ASM 1
21:45:46:503 6ac2d740 GPU #3: algorithm ASM 1
21:45:46:513 6ac2d740 GPU #4: algorithm ASM 1
21:45:46:522 6ac2d740 GPU #5: algorithm ASM 1
21:45:46:524 6ac2d740 cudaGetDeviceCount returned error 38
-> no CUDA-capable device is detected
21:45:46:524 6ac2d740 No NVIDIA CUDA GPUs detected.
21:45:46:524 6ac2d740 Total cards: 6
21:45:49:726 6ac2d740
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
21:45:50:727 6ac2d740 No NVIDIA cards in the list, NVML library will not be used.
21:45:50:778 227fc700 ETH: Stratum - connecting to 'etc.2miners.com' <54.36.109.160> port 1010 (unsecure)
21:45:50:864 227fc700 ETH: Stratum - Connected (etc.2miners.com:1010) (unsecure)
21:45:50:877 6ac2d740 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
21:45:50:877 6ac2d740 ETH: eth-proxy stratum mode
21:45:50:877 6ac2d740 "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
21:45:50:877 6ac2d740 Watchdog enabled
21:45:50:877 6ac2d740 Remote management (READ-ONLY MODE) is enabled on port 3333
21:45:50:877 6ac2d740
21:45:50:877 6ac2d740 You did not specify -dcri values directly, so they will be detected automatically
21:45:50:878 6ac2d740 Automatic detection of best -dcri values started, please wait...
21:45:50:945 227fc700 buf: {"id":2,"jsonrpc":"2.0","result":true}
21:45:50:945 227fc700 ETH: Authorized
21:45:50:945 227fc700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
21:45:51:135 23fff700 Setting DAG epoch #280...
21:45:53:516 682fd700 GPU 0 temp = 34, old fan speed = 22, new fan speed = 25
21:45:53:517 682fd700 GPU 1 temp = 34, old fan speed = 22, new fan speed = 25
21:45:53:517 682fd700 GPU 2 temp = 37, old fan speed = 22, new fan speed = 25
21:45:53:517 682fd700 GPU 3 temp = 34, old fan speed = 22, new fan speed = 25
21:45:53:517 682fd700 GPU 4 temp = 36, old fan speed = 22, new fan speed = 25
21:45:53:517 682fd700 GPU 5 temp = 35, old fan speed = 22, new fan speed = 25
21:45:54:383 23fff700 Setting DAG epoch #280 for GPU4
21:45:54:383 23fff700 Create GPU buffer for GPU4
21:45:54:383 237fe700 Setting DAG epoch #280 for GPU5
21:45:54:383 237fe700 Create GPU buffer for GPU5
21:45:54:383 237fe700 GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 2b7fe700 Setting DAG epoch #280 for GPU1
21:45:54:383 2b7fe700 Create GPU buffer for GPU1
21:45:54:383 2b7fe700 GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 237fe700 GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:54:383 2b7fe700 GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:54:383 23fff700 GPU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 23fff700 GPU4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:54:383 54900700 Setting DAG epoch #280 for GPU0
21:45:54:383 54900700 Create GPU buffer for GPU0
21:45:54:383 54900700 GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 54900700 GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:54:383 297fa700 Setting DAG epoch #280 for GPU3
21:45:54:383 2a7fc700 Setting DAG epoch #280 for GPU2
21:45:54:383 2a7fc700 Create GPU buffer for GPU2
21:45:54:383 2a7fc700 GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 2a7fc700 GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:54:383 297fa700 Create GPU buffer for GPU3
21:45:54:383 297fa700 GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
21:45:54:383 297fa700 GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:45:56:517 682fd700 GPU 0 temp = 34, old fan speed = 22, new fan speed = 25
21:45:56:517 682fd700 GPU 1 temp = 34, old fan speed = 22, new fan speed = 25
21:45:56:517 682fd700 GPU 2 temp = 37, old fan speed = 22, new fan speed = 25
21:45:56:518 682fd700 GPU 3 temp = 34, old fan speed = 22, new fan speed = 25
21:45:56:518 682fd700 GPU 4 temp = 36, old fan speed = 22, new fan speed = 25
21:45:56:518 682fd700 GPU 5 temp = 35, old fan speed = 22, new fan speed = 25
21:45:57:383 237fe700 Set global fail flag, failed GPU5
21:45:57:383 237fe700 GPU 5 failed
21:45:57:383 54900700 Set global fail flag, failed GPU0
21:45:57:384 54900700 GPU 0 failed
21:45:57:384 22ffd700 Setting DAG epoch #280 for GPU5
21:45:57:384 22ffd700 GPU5, OpenCL error -38 - cannot write buffer for DAG
21:45:57:383 2a7fc700 Set global fail flag, failed GPU2
21:45:57:384 2a7fc700 GPU 2 failed
21:45:57:383 23fff700 Set global fail flag, failed GPU4
21:45:57:384 23fff700 GPU 4 failed
21:45:57:384 2affd700 Setting DAG epoch #280 for GPU2
21:45:57:383 2b7fe700 Set global fail flag, failed GPU1
21:45:57:385 2b7fe700 GPU 1 failed
21:45:57:383 297fa700 Set global fail flag, failed GPU3
21:45:57:385 297fa700 GPU 3 failed
21:45:57:385 29ffb700 Setting DAG epoch #280 for GPU3
21:45:57:385 29ffb700 GPU3, OpenCL error -38 - cannot write buffer for DAG
21:45:57:385 2affd700 GPU2, OpenCL error -38 - cannot write buffer for DAG
21:45:57:385 2bfff700 Setting DAG epoch #280 for GPU1
21:45:57:385 2bfff700 GPU1, OpenCL error -38 - cannot write buffer for DAG
21:45:57:385 55101700 Setting DAG epoch #280 for GPU0
21:45:57:385 55101700 GPU0, OpenCL error -38 - cannot write buffer for DAG
21:45:57:385 28ff9700 Setting DAG epoch #280 for GPU4
21:45:57:385 28ff9700 GPU4, OpenCL error -38 - cannot write buffer for DAG
21:45:58:346 227fc700 ETH: 07/15/19-21:45:58 - New job from etc.2miners.com:1010
21:45:58:346 227fc700 target: 0x000000007fd9a601 (diff: 8600MH), epoch 280(3.19GB)
21:45:58:347 227fc700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:45:58:347 227fc700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
21:45:59:518 682fd700 GPU 0 temp = 34, old fan speed = 22, new fan speed = 25
21:45:59:518 682fd700 GPU 1 temp = 34, old fan speed = 22, new fan speed = 25
21:45:59:518 682fd700 GPU 2 temp = 37, old fan speed = 22, new fan speed = 25
21:45:59:518 682fd700 GPU 3 temp = 34, old fan speed = 22, new fan speed = 25
21:45:59:518 682fd700 GPU 4 temp = 36, old fan speed = 22, new fan speed = 25
21:45:59:518 682fd700 GPU 5 temp = 35, old fan speed = 22, new fan speed = 25
21:46:00:037 297fa700 srv_thr cnt: 1, IP: 127.0.0.1
21:46:00:037 297fa700 recv: 51
21:46:00:037 297fa700 srv pck: 50
21:46:00:037 297fa700 srv bs: 0
21:46:00:037 297fa700 sent: 308
21:46:00:384 22ffd700 Set global fail flag, failed GPU5
21:46:00:384 22ffd700 GPU 5 failed
21:46:00:385 2affd700 Set global fail flag, failed GPU2
21:46:00:385 29ffb700 Set global fail flag, failed GPU3
21:46:00:385 29ffb700 GPU 3 failed
21:46:00:385 55101700 Set global fail flag, failed GPU0
21:46:00:385 55101700 GPU 0 failed
21:46:00:385 2bfff700 Set global fail flag, failed GPU1
21:46:00:385 2bfff700 GPU 1 failed
21:46:00:385 28ff9700 Set global fail flag, failed GPU4
21:46:00:386 28ff9700 GPU 4 failed
21:46:00:386 2affd700 GPU 2 failed
21:46:01:038 227fc700 ETH: checking pool connection...
21:46:01:038 227fc700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
21:46:02:306 227fc700 ETH: 07/15/19-21:46:02 - New job from etc.2miners.com:1010
21:46:02:306 227fc700 target: 0x000000007fd9a601 (diff: 8600MH), epoch 280(3.19GB)
21:46:02:306 227fc700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:46:02:306 227fc700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
21:46:02:519 682fd700 GPU 0 temp = 34, old fan speed = 22, new fan speed = 25
21:46:06:666 227fc700 ETH: 07/15/19-21:46:06 - New job from etc.2miners.com:1010
21:46:06:666 227fc700 target: 0x000000007fd9a601 (diff: 8600MH), epoch 280(3.19GB)
21:46:06:666 227fc700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:46:06:666 227fc700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
21:46:08:521 682fd700 GPU 0 temp = 34, old fan speed = 22, new fan speed = 25
|
|
|
|
|
|
VasilyS
|
|
July 15, 2019, 08:48:34 PM |
|
You have to increase virtual memory size to at least sum of the memory of your cards.
|
|
|
|
farmgpu0914
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 15, 2019, 10:10:08 PM
Last edit: July 16, 2019, 07:06:58 PM by farmgpu0914 |
|
You have to increase virtual memory size to at least sum of the memory of your cards.
Well, for windows it's true but I'm running hiveos(linux). How to be here? Some people running 13 or more cards and I've never heard that they do virtual memory tuning in linux. Some calculations - for me problem epoch - #280 (3.19 Gb). 6 cards its 19.14Gb in sum. Why does its worked fine with epoch 279? |
|
|
|
|
farmgpu0914
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 16, 2019, 08:03:07 PM |
|
Start with other miner (not Claymore) - its works fine with ETC
epoch #280 - its Claymore issue.
|
|
|
|
|
awarywocki
Newbie
Offline
Activity: 8
Merit: 1
|
|
July 16, 2019, 08:51:32 PM |
|
Start with other miner (not Claymore) - its works fine with ETC
epoch #280 - its Claymore issue.
I have 3 rigs + 1 PC computer with one card. Below is my configuration: 1. 6xRx 470 4GB (miner ver = 14.7) 2. 5xRx 480 4GB + 1x Rx 570 4GB (miner ver = 11.  3. 4xRx 570 4GB (miner ver = 14.5) 4. 1xRx 570 4GB (miner ver = 14.7) today only rig 3 and PC (4) works normally. 1 and 2 hang/restart just after "setting epoch 280 done". After switching to ETH (epoch 272) they works normally (for now). So my observation is: Rx 470/480 4GB won't work on any Claymore up to 14.7 with epoch 280 Rx 570 4GB work normally on newest and older Claymore version with epoch 280 any solution for this for now? Or we should wait for new version of Claymore arrive? |
|
|
|
|
destinys
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 17, 2019, 06:34:24 AM |
|
Hi Claymore,
Is there any new updates on the Mining software for Rx 5700. Thanks
Regards
Melvin
|
|
|
|
|
mu_enrico
Copper Member
Legendary
Offline
Activity: 2324
Merit: 2142
Slots Enthusiast & Expert
|
|
July 17, 2019, 09:13:38 AM |
|
You have to increase virtual memory size to at least sum of the memory of your cards.
Well, for windows it's true but I'm running hiveos(linux). How to be here? Some people running 13 or more cards and I've never heard that they do virtual memory tuning in linux. I believe we can configure the swap file or swap area on Linux when installing the OS. It's the same as virtual memory on Windows OS. However, I haven't tried it after installation, so perhaps this link can help: https://linuxize.com/post/how-to-add-swap-space-on-ubuntu-18-04/ |
| │ | ███████████████████████
███████████████████████
███████████████████████
███████████████████████
███▀▀▀█████████████████
███▄▄▄█████████████████
███████████████████████
███████████████████████
███████████████████████
█████████████████████
███████████████████
███████████████
████████████████████████ | ███████████████████████████
███████████████████████████
███████████████████████████
█████████▀▀██▀██▀▀█████████
█████████████▄█████████████
████████▄█████████▄████████
█████████████▄█████████████
█████████████▄█▄███████████
██████████▀▀█████████████
██████████▀█▀██████████
▀███████████████████▀
▀███████████████▀
█████████████████████████ | | | O F F I C I A L P A R T N E R S
▬▬▬▬▬▬▬▬▬▬
ASTON VILLA FC
BURNLEY FC | | | BK8? | | | .
..PLAY NOW.. |
|
|
|
mineman5
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 18, 2019, 05:20:38 AM |
|
Hey guys, I encountered a issue with my rig or pool or mining program. I mine ether using dwarfpool and for the past 2 days I have not been able to mine and when I checked simplemining I see that it shows
RIG IS OFFLINE for 2d 10h 36m
You enabled full remote management, but did not specify -mpsw option to protect it by password, please do it, otherwise you can be attacked if you share remote management port to internet! Or use negative -mport value to enable read-only remote management mode, see Readme for details.
ETH: 1 pool is specified
Main Ethereum pool is eth-eu.dwarfpool.com:8008
DCR: 0 pool is specified
AMD OpenCL platform not found
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit
Miner ended or crashed. Restarting miner in 10 seconds...
Checking free disk space of local cache miners...
Preparing miner workspace...
Starting Miner Program...
Under Hash rate it shows:
Main Ethereum pool is eth-eu.d
DCR: 0 pool is specified
THe config I have is this (miner options)
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -mpsw
Help please
|
|
|
|
|
|
Dowper_
|
|
July 18, 2019, 10:01:53 AM |
|
Hey guys, I encountered a issue with my rig or pool or mining program. I mine ether using dwarfpool and for the past 2 days I have not been able to mine and when I checked simplemining I see that it shows
RIG IS OFFLINE for 2d 10h 36m
You enabled full remote management, but did not specify -mpsw option to protect it by password, please do it, otherwise you can be attacked if you share remote management port to internet! Or use negative -mport value to enable read-only remote management mode, see Readme for details.
ETH: 1 pool is specified
Main Ethereum pool is eth-eu.dwarfpool.com:8008
DCR: 0 pool is specified
AMD OpenCL platform not found
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit
Miner ended or crashed. Restarting miner in 10 seconds...
Checking free disk space of local cache miners...
Preparing miner workspace...
Starting Miner Program...
Under Hash rate it shows:
Main Ethereum pool is eth-eu.d
DCR: 0 pool is specified
THe config I have is this (miner options)
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -mpsw
Help please
Reinstall driver. |
|
|
|
mineman5
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 18, 2019, 10:52:39 AM |
|
Hey guys, I encountered a issue with my rig or pool or mining program. I mine ether using dwarfpool and for the past 2 days I have not been able to mine and when I checked simplemining I see that it shows
RIG IS OFFLINE for 2d 10h 36m
You enabled full remote management, but did not specify -mpsw option to protect it by password, please do it, otherwise you can be attacked if you share remote management port to internet! Or use negative -mport value to enable read-only remote management mode, see Readme for details.
ETH: 1 pool is specified
Main Ethereum pool is eth-eu.dwarfpool.com:8008
DCR: 0 pool is specified
AMD OpenCL platform not found
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit
Miner ended or crashed. Restarting miner in 10 seconds...
Checking free disk space of local cache miners...
Preparing miner workspace...
Starting Miner Program...
Under Hash rate it shows:
Main Ethereum pool is eth-eu.d
DCR: 0 pool is specified
THe config I have is this (miner options)
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -mpsw
Help please
Reinstall driver. you mean in the file from the USB? |
|
|
|
|
Luke83
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 18, 2019, 12:03:17 PM |
|
Hello,
I have a 6 nitro+ Vega 64 Limited Edition mining rig, each card is doing 51+ Mhs, but it happens time to time, that randomly, 1 card, (or more) from the 6, drops its hashrate for like 30 to 60 seconds and then goes back to 51mhs.
I am using Claymore 14.7 with -strap 4 option.
My overclock settings are :
GPU : 1408 Mhz 905 Mv;
Memory : 1100 Mhz 900Mv
Fans are set at 90% and the power draw is around 155W.
I think my overclocking is not stable. Or maybe some settings are wrong in the Bios? (motherboard : MSI Z270 A PRO)
The drop can be down to 49 or 44 or even 42 Mhs. And when the drop happens the power draw is reduced to like 140W.
Any one can assist? Your help would be very appreciated.
Finally I managed to make it stable and now I am mining at 53.2 Mh/s for a single Vega for less than 170w. Am I breaking world record for vega 64 ? https://image.noelshack.com/fichiers/2019/29/4/1563451340-53-2-mhs.jpg |
|
|
|
|
Mashy81
Jr. Member
Offline
Activity: 225
Merit: 1
|
|
July 18, 2019, 09:52:26 PM |
|
Hello,
I have a 6 nitro+ Vega 64 Limited Edition mining rig, each card is doing 51+ Mhs, but it happens time to time, that randomly, 1 card, (or more) from the 6, drops its hashrate for like 30 to 60 seconds and then goes back to 51mhs.
I am using Claymore 14.7 with -strap 4 option.
My overclock settings are :
GPU : 1408 Mhz 905 Mv;
Memory : 1100 Mhz 900Mv
Fans are set at 90% and the power draw is around 155W.
I think my overclocking is not stable. Or maybe some settings are wrong in the Bios? (motherboard : MSI Z270 A PRO)
The drop can be down to 49 or 44 or even 42 Mhs. And when the drop happens the power draw is reduced to like 140W.
Any one can assist? Your help would be very appreciated.
Finally I managed to make it stable and now I am mining at 53.2 Mh/s for a single Vega for less than 170w. Am I breaking world record for vega 64 ? https://image.noelshack.com/fichiers/2019/29/4/1563451340-53-2-mhs.jpg170w is only gpu chip only. Whats the power at the wall for this??? |
|
|
|
|
Unclegogi
Newbie
Offline
Activity: 44
Merit: 0
|
|
July 18, 2019, 10:57:47 PM |
|
What strap and clocks do you use for 53.2MH ? My record is 51.2 for Vega 64 and 50.9 for Vega 56@64, clocks 1050/1100, custom timings. |
|
|
|
|
ZPDM
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 19, 2019, 04:38:41 AM |
|
Can't download Claymore from MEGA
"SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data"
occured on a Windows and Linux machine
Don't see any other download sites.
Edit: it seems to be working again.
|
|
|
|
|
|
|
|
BogdanCo
|
|
July 19, 2019, 04:10:43 PM |
|
Can't download Claymore from MEGA
"SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data"
occured on a Windows and Linux machine
Don't see any other download sites.
Edit: it seems to be working again.
you can download the already configured miner by the link in this video. there everything is configured, you need to put only your wallet address. REMOVED Always download from official Claymore links. If not, sooner or later another noob start to cry here that Claymore is a thief. |
|
|
|
|
|
